All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baolu Lu <baolu.lu@linux.intel.com>
To: Ethan Zhao <haifeng.zhao@linux.intel.com>,
	kevin.tian@intel.com, bhelgaas@google.com, dwmw2@infradead.org,
	will@kernel.org, robin.murphy@arm.com, lukas@wunner.de
Cc: baolu.lu@linux.intel.com, linux-pci@vger.kernel.org,
	iommu@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH v10 2/5] iommu/vt-d: break out ATS Invalidation if target device is gone
Date: Wed, 10 Jan 2024 13:17:13 +0800	[thread overview]
Message-ID: <d0446efb-936c-4abc-839b-8e6c3f28ee07@linux.intel.com> (raw)
In-Reply-To: <20231228170206.720675-3-haifeng.zhao@linux.intel.com>

On 12/29/23 1:02 AM, Ethan Zhao wrote:
> For those endpoint devices connect to system via hotplug capable ports,
> users could request a warm reset to the device by flapping device's link
> through setting the slot's link control register, as pciehp_ist() DLLSC
> interrupt sequence response, pciehp will unload the device driver and
> then power it off. thus cause an IOMMU device-TLB invalidation (Intel
> VT-d spec, or ATS Invalidation in PCIe spec r6.1) request for device to
> be sent and a long time completion/timeout waiting in interrupt context.
> 
> That would cause following continuous hard lockup warning and system hang
> 
> [ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down
> [ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present
> [ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144
> [ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
>           OE    kernel version xxxx
> [ 4223.822623] Hardware name: vendorname xxxx 666-106,
> BIOS 01.01.02.03.01 05/15/2023
> [ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490
> [ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
>   57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1
> 0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
> [ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
> [ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
> [ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
> [ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
> [ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
> [ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
> [ 4223.822626] FS:  0000000000000000(0000) GS:ffffa237ae400000(0000)
> knlGS:0000000000000000
> [ 4223.822627] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0
> [ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
> [ 4223.822628] PKRU: 55555554
> [ 4223.822628] Call Trace:
> [ 4223.822628]  qi_flush_dev_iotlb+0xb1/0xd0
> [ 4223.822628]  __dmar_remove_one_dev_info+0x224/0x250
> [ 4223.822629]  dmar_remove_one_dev_info+0x3e/0x50
> [ 4223.822629]  intel_iommu_release_device+0x1f/0x30
> [ 4223.822629]  iommu_release_device+0x33/0x60
> [ 4223.822629]  iommu_bus_notifier+0x7f/0x90
> [ 4223.822630]  blocking_notifier_call_chain+0x60/0x90
> [ 4223.822630]  device_del+0x2e5/0x420
> [ 4223.822630]  pci_remove_bus_device+0x70/0x110
> [ 4223.822630]  pciehp_unconfigure_device+0x7c/0x130
> [ 4223.822631]  pciehp_disable_slot+0x6b/0x100
> [ 4223.822631]  pciehp_handle_presence_or_link_change+0xd8/0x320
> [ 4223.822631]  pciehp_ist+0x176/0x180
> [ 4223.822631]  ? irq_finalize_oneshot.part.50+0x110/0x110
> [ 4223.822632]  irq_thread_fn+0x19/0x50
> [ 4223.822632]  irq_thread+0x104/0x190
> [ 4223.822632]  ? irq_forced_thread_fn+0x90/0x90
> [ 4223.822632]  ? irq_thread_check_affinity+0xe0/0xe0
> [ 4223.822633]  kthread+0x114/0x130
> [ 4223.822633]  ? __kthread_cancel_work+0x40/0x40
> [ 4223.822633]  ret_from_fork+0x1f/0x30
> [ 4223.822633] Kernel panic - not syncing: Hard LOCKUP
> [ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
>           OE     kernel version xxxx
> [ 4223.822634] Hardware name: vendorname xxxx 666-106,
> BIOS 01.01.02.03.01 05/15/2023
> [ 4223.822634] Call Trace:
> [ 4223.822634]  <NMI>
> [ 4223.822635]  dump_stack+0x6d/0x88
> [ 4223.822635]  panic+0x101/0x2d0
> [ 4223.822635]  ? ret_from_fork+0x11/0x30
> [ 4223.822635]  nmi_panic.cold.14+0xc/0xc
> [ 4223.822636]  watchdog_overflow_callback.cold.8+0x6d/0x81
> [ 4223.822636]  __perf_event_overflow+0x4f/0xf0
> [ 4223.822636]  handle_pmi_common+0x1ef/0x290
> [ 4223.822636]  ? __set_pte_vaddr+0x28/0x40
> [ 4223.822637]  ? flush_tlb_one_kernel+0xa/0x20
> [ 4223.822637]  ? __native_set_fixmap+0x24/0x30
> [ 4223.822637]  ? ghes_copy_tofrom_phys+0x70/0x100
> [ 4223.822637]  ? __ghes_peek_estatus.isra.16+0x49/0xa0
> [ 4223.822637]  intel_pmu_handle_irq+0xba/0x2b0
> [ 4223.822638]  perf_event_nmi_handler+0x24/0x40
> [ 4223.822638]  nmi_handle+0x4d/0xf0
> [ 4223.822638]  default_do_nmi+0x49/0x100
> [ 4223.822638]  exc_nmi+0x134/0x180
> [ 4223.822639]  end_repeat_nmi+0x16/0x67
> [ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490
> [ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
>   57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10
>   74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
> [ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
> [ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
> [ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
> [ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
> [ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
> [ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
> [ 4223.822641]  ? qi_submit_sync+0x2c0/0x490
> [ 4223.822642]  ? qi_submit_sync+0x2c0/0x490
> [ 4223.822642]  </NMI>
> [ 4223.822642]  qi_flush_dev_iotlb+0xb1/0xd0
> [ 4223.822642]  __dmar_remove_one_dev_info+0x224/0x250
> [ 4223.822643]  dmar_remove_one_dev_info+0x3e/0x50
> [ 4223.822643]  intel_iommu_release_device+0x1f/0x30
> [ 4223.822643]  iommu_release_device+0x33/0x60
> [ 4223.822643]  iommu_bus_notifier+0x7f/0x90
> [ 4223.822644]  blocking_notifier_call_chain+0x60/0x90
> [ 4223.822644]  device_del+0x2e5/0x420
> [ 4223.822644]  pci_remove_bus_device+0x70/0x110
> [ 4223.822644]  pciehp_unconfigure_device+0x7c/0x130
> [ 4223.822644]  pciehp_disable_slot+0x6b/0x100
> [ 4223.822645]  pciehp_handle_presence_or_link_change+0xd8/0x320
> [ 4223.822645]  pciehp_ist+0x176/0x180
> [ 4223.822645]  ? irq_finalize_oneshot.part.50+0x110/0x110
> [ 4223.822645]  irq_thread_fn+0x19/0x50
> [ 4223.822646]  irq_thread+0x104/0x190
> [ 4223.822646]  ? irq_forced_thread_fn+0x90/0x90
> [ 4223.822646]  ? irq_thread_check_affinity+0xe0/0xe0
> [ 4223.822646]  kthread+0x114/0x130
> [ 4223.822647]  ? __kthread_cancel_work+0x40/0x40
> [ 4223.822647]  ret_from_fork+0x1f/0x30
> [ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocation
> range: 0xffffffff80000000-0xffffffffbfffffff)
> 
> Furthermore even an in-process safe removal unplugged device could be
> surprise removed anytime, thus need to check the ATS Invalidation target
> device state to see if it is gone, and don't wait for the completion/
> timeout blindly, thus avoid the up to 1min+50% (see Implementation Note
> in PCIe spec r6.1 sec 10.3.1) waiting and cause hard lockup or system
> hang.
> 
> Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
> ---
>   drivers/iommu/intel/dmar.c | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
> index 3d661f2b7946..0a8d628a42ee 100644
> --- a/drivers/iommu/intel/dmar.c
> +++ b/drivers/iommu/intel/dmar.c
> @@ -1423,6 +1423,14 @@ int qi_submit_sync(struct intel_iommu *iommu, struct qi_desc *desc,
>   	writel(qi->free_head << shift, iommu->reg + DMAR_IQT_REG);
>   
>   	while (qi->desc_status[wait_index] != QI_DONE) {
> +		/*
> +		 * if the device-TLB invalidation target device is gone, don't
> +		 * wait anymore, it might take up to 1min+50%, causes system
> +		 * hang. (see Implementation Note in PCIe spec r6.1 sec 10.3.1)
> +		 */
> +		if ((type == QI_DIOTLB_TYPE || type == QI_DEIOTLB_TYPE) && pdev)
> +			if (!pci_device_is_present(pdev))
> +					break;
>   		/*
>   		 * We will leave the interrupts disabled, to prevent interrupt
>   		 * context to queue another cmd while a cmd is already submitted

How about handing this in qi_check_fault() when it detects an ITE error?

qi_check_fault() should returns -ETIMEDOUT instead of -EAGAIN, if

- qi_submit_sync() is called for a device TLB invalidation request
   (indicated by pdev is valid);
- device is not present.

Best regards,
baolu

  reply	other threads:[~2024-01-10  5:22 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-28 17:02 [RFC PATCH v10 0/5] fix vt-d hard lockup when hotplug ATS capable device Ethan Zhao
2023-12-28 17:02 ` [RFC PATCH v10 1/5] iommu/vt-d: add pci_dev parameter to qi_submit_sync and refactor callers Ethan Zhao
2024-01-10  4:59   ` Baolu Lu
2024-01-10  7:51     ` Ethan Zhao
2023-12-28 17:02 ` [RFC PATCH v10 2/5] iommu/vt-d: break out ATS Invalidation if target device is gone Ethan Zhao
2024-01-10  5:17   ` Baolu Lu [this message]
2024-01-10  8:29     ` Ethan Zhao
2023-12-29  8:18 ` [RFC PATCH v10 0/5] fix vt-d hard lockup when hotplug ATS capable device Tian, Kevin
2023-12-29  9:28   ` Ethan Zhao
2024-01-09  1:24 ` Ethan Zhao
2024-01-15  7:58 ` Ethan Zhao
2024-01-17  3:24   ` Baolu Lu
2024-01-17  5:26     ` Ethan Zhao
2024-01-17  5:38       ` Ethan Zhao
2024-01-17  9:00         ` Ethan Zhao
2024-01-18  0:46           ` Baolu Lu
2024-01-18  2:26             ` Ethan Zhao
2024-01-18  2:32               ` Ethan Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d0446efb-936c-4abc-839b-8e6c3f28ee07@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=dwmw2@infradead.org \
    --cc=haifeng.zhao@linux.intel.com \
    --cc=iommu@lists.linux.dev \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.