diff for duplicates of <d0e681ae203bb14f4061d248b935578b@codeaurora.org>

diff --git a/a/1.txt b/N1/1.txt
index 1e9c73b..cbbc6d6 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -38,7 +38,7 @@ Sure. Will make this change in the next post.
 >> +		brightness = low_limit;
 >> +
 >> +	brightness_msb_mask = 0xf;
->> +	if (wled->max_brightness == WLED5_SINK_REG_BRIGHT_MAX_15B)
+>> +	if (wled->max_brightness = WLED5_SINK_REG_BRIGHT_MAX_15B)
 >> +		brightness_msb_mask = 0x7f;
 > 
 > Why not just brightness &= wled->max_brightness? But given that it 
@@ -72,7 +72,7 @@ next post.
 >> +	int rc;
 >> +	u8 val;
 >> +
->> +	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
+>> +	val = (wled->cfg.mod_sel = MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
 >> +					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
 >> +	rc = regmap_update_bits(wled->regmap,
 >> +				wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
diff --git a/a/content_digest b/N1/content_digest
index 77b0179..1c80b8a 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -3,25 +3,25 @@
  "ref\020200308214748.GL1094083@builder\0"
  "From\0kgunda@codeaurora.org\0"
  "Subject\0Re: [PATCH V1 2/2] backlight: qcom-wled: Add support for WLED5 peripheral in PM8150L\0"
- "Date\0Mon, 09 Mar 2020 11:57:48 +0530\0"
+ "Date\0Mon, 09 Mar 2020 06:39:48 +0000\0"
  "To\0Bjorn Andersson <bjorn.andersson@linaro.org>\0"
- "Cc\0jingoohan1@gmail.com"
-  lee.jones@linaro.org
+ "Cc\0mark.rutland@arm.com"
+  devicetree@vger.kernel.org
+  daniel.thompson@linaro.org
   b.zolnierkie@samsung.com
+  jingoohan1@gmail.com
+  Andy Gross <agross@kernel.org>
+  linux-kernel@vger.kernel.org
   dri-devel@lists.freedesktop.org
-  daniel.thompson@linaro.org
+  linux-fbdev@vger.kernel.org
+  robh+dt@kernel.org
   jacek.anaszewski@gmail.com
   pavel@ucw.cz
-  robh+dt@kernel.org
-  mark.rutland@arm.com
-  linux-leds@vger.kernel.org
-  devicetree@vger.kernel.org
-  linux-kernel@vger.kernel.org
-  Dan Murphy <dmurphy@ti.com>
-  Andy Gross <agross@kernel.org>
   linux-arm-msm@vger.kernel.org
-  linux-fbdev@vger.kernel.org
- " linux-arm-msm-owner@vger.kernel.org\0"
+  lee.jones@linaro.org
+  linux-arm-msm-owner@vger.kernel.org
+  linux-leds@vger.kernel.org
+ " Dan Murphy <dmurphy@ti.com>\0"
  "\00:1\0"
  "b\0"
  "On 2020-03-09 03:17, Bjorn Andersson wrote:\n"
@@ -64,7 +64,7 @@
  ">> +\t\tbrightness = low_limit;\n"
  ">> +\n"
  ">> +\tbrightness_msb_mask = 0xf;\n"
- ">> +\tif (wled->max_brightness == WLED5_SINK_REG_BRIGHT_MAX_15B)\n"
+ ">> +\tif (wled->max_brightness = WLED5_SINK_REG_BRIGHT_MAX_15B)\n"
  ">> +\t\tbrightness_msb_mask = 0x7f;\n"
  "> \n"
  "> Why not just brightness &= wled->max_brightness? But given that it \n"
@@ -98,7 +98,7 @@
  ">> +\tint rc;\n"
  ">> +\tu8 val;\n"
  ">> +\n"
- ">> +\tval = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :\n"
+ ">> +\tval = (wled->cfg.mod_sel = MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :\n"
  ">> +\t\t\t\t\t     WLED5_SINK_REG_SYNC_MOD_B_BIT;\n"
  ">> +\trc = regmap_update_bits(wled->regmap,\n"
  ">> +\t\t\t\twled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,\n"
@@ -126,4 +126,4 @@
  "> Regards,\n"
  > Bjorn
 
-b14741a4fac8181523b6b08e18c436c6328243249ceedcb6b1b183a258882d2b
+64716720e642860813d591a5d8066aced1aed11c257abe5e6b8b08ace68efdb8
