Re: [PATCH v10 6/6] mmc: core: Add support for resetting an eMMC at system resume

[Shawn Lin <shawn.lin@linux.dev>]

在 2026/10/27 星期二 22:40, Ulf Hansson 写道:
> The DT property reset-card-at-resume specifies that we need to make a reset
> of an eMMC card at system resume, assuming it also has stayed powered on
> during system suspend.
> 
> To implement support for this, let's start by parsing for the new DT
> property and set the new bit MMC_CAP2_RESET_AT_RESUME if it's found. Based
> on the property, we must also set MMC_PM_KEEP_POWER in the pm_flags for the
> host, to keep the eMMC powered on during system suspend.
> 
> Finally, to manage the actual reset during system resume, let's extend
> mmc_resume() to support the needed behaviour.
> 

Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

> Signed-off-by: Ulf Hansson <ulf.hansson@oss.qualcomm.com>
> ---
>   drivers/mmc/core/host.c  | 10 ++++++++++
>   drivers/mmc/core/mmc.c   |  5 +++++
>   include/linux/mmc/host.h |  1 +
>   3 files changed, 16 insertions(+)
> 
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 8e9e61839198..e3daf4026cba 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -48,6 +48,14 @@ static int mmc_host_class_prepare(struct device *dev)
>   	if (host->bus_ops->pre_suspend)
>   		return host->bus_ops->pre_suspend(host);
>   
> +	/*
> +	 * If it's required to make a reset of the card at system resume, this
> +	 * indirectly also means that we must keep the card powered on during
> +	 * system suspend.
> +	 */
> +	if (host->caps2 & MMC_CAP2_RESET_AT_RESUME)
> +		return mmc_set_host_pm_flags(host, MMC_PM_KEEP_POWER);
> +
>   	return 0;
>   }
>   
> @@ -375,6 +383,8 @@ int mmc_of_parse(struct mmc_host *host)
>   		host->pm_caps |= MMC_PM_KEEP_POWER;
>   	if (device_property_read_bool(dev, "wakeup-source"))
>   		host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
> +	if (device_property_read_bool(dev, "reset-card-at-resume"))
> +		host->caps2 |= MMC_CAP2_RESET_AT_RESUME;
>   	if (device_property_read_bool(dev, "mmc-ddr-3_3v"))
>   		host->caps |= MMC_CAP_3_3V_DDR;
>   	if (device_property_read_bool(dev, "mmc-ddr-1_8v"))
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index d4bf0f25bd74..908d5cad304b 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -2315,6 +2315,11 @@ static int mmc_resume(struct mmc_host *host)
>   	}
>   
>   	pm_runtime_enable(&host->card->dev);
> +
> +	if (mmc_card_keep_power(host) &&
> +	    host->caps2 & MMC_CAP2_RESET_AT_RESUME)
> +		_mmc_hw_reset(host);
> +
>   	host->pm_flags &= ~MMC_PM_KEEP_POWER;
>   	return 0;
>   }
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 032c018650e0..552873da7987 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -430,6 +430,7 @@ struct mmc_host {
>   	u32			caps2;		/* More host capabilities */
>   
>   #define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
> +#define MMC_CAP2_RESET_AT_RESUME (1 << 1)	/* Reset the card at system resume */
>   #define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
>   #define MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND (1 << 3) /* Can do full power cycle in suspend */
>   #define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */