From: Guenter Roeck <linux@roeck-us.net>
To: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
Subject: Re: [PATCH 4/6] hwmon: (pmbus/max20830): add VOUT feedback resistor scaling support
Date: Mon, 29 Jun 2026 21:53:47 -0700 [thread overview]
Message-ID: <d306dab2-efcb-4626-b480-c4e8779cdeed@roeck-us.net> (raw)
In-Reply-To: <20260630-dev-max20830c-v1-4-a02786bde470@analog.com>
On 6/29/26 19:46, Alexis Czezar Torreno wrote:
> Implement support for external voltage divider scaling using the
> adi,vout-rfb1-ohms and adi,vout-rfb2-ohms device tree properties.
>
> When the desired output voltage exceeds VREF, a resistor divider
> (RFB1 and RFB2) is used to scale down the feedback voltage. The
> driver reads these resistor values from device tree and applies
> the scaling formula: VOUT_actual = VOUT_measured × (1 + RFB1/RFB2)
>
> The properties are optional. If not specified, the driver assumes
> no voltage divider is present and reports the raw VOUT reading.
>
This will require a detailed explanation why only PMBUS_READ_VOUT
would require scaling but not any of the other vout related commands.
Guenter
next prev parent reply other threads:[~2026-06-30 4:53 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-30 2:46 [PATCH 0/6] Add support for MAX20830C and MAX20840C step-down DC-DC switching regulator Alexis Czezar Torreno
2026-06-30 2:46 ` [PATCH 1/6] dt-bindings: hwmon: (pmbus/max20830): add enable-gpios property Alexis Czezar Torreno
2026-06-30 2:51 ` sashiko-bot
2026-06-30 7:26 ` Krzysztof Kozlowski
2026-06-30 8:07 ` Torreno, Alexis Czezar
2026-06-30 15:48 ` Guenter Roeck
2026-07-01 1:16 ` Torreno, Alexis Czezar
2026-06-30 2:46 ` [PATCH 2/6] hwmon: (pmbus/max20830): add support for enable GPIO Alexis Czezar Torreno
2026-06-30 2:53 ` sashiko-bot
2026-06-30 3:50 ` Guenter Roeck
2026-06-30 4:51 ` Guenter Roeck
2026-06-30 8:07 ` Torreno, Alexis Czezar
2026-06-30 2:46 ` [PATCH 3/6] dt-bindings: hwmon: (pmbus/max20830): add VOUT feedback resistor properties Alexis Czezar Torreno
2026-06-30 3:02 ` sashiko-bot
2026-06-30 7:39 ` Krzysztof Kozlowski
2026-06-30 2:46 ` [PATCH 4/6] hwmon: (pmbus/max20830): add VOUT feedback resistor scaling support Alexis Czezar Torreno
2026-06-30 3:00 ` sashiko-bot
2026-06-30 4:53 ` Guenter Roeck [this message]
2026-06-30 8:07 ` Torreno, Alexis Czezar
2026-06-30 15:34 ` Guenter Roeck
2026-07-01 1:16 ` Torreno, Alexis Czezar
2026-06-30 2:46 ` [PATCH 5/6] dt-bindings: hwmon: (pmbus/max20830): add max20830c and max20840c support Alexis Czezar Torreno
2026-06-30 2:56 ` sashiko-bot
2026-06-30 7:41 ` Krzysztof Kozlowski
2026-06-30 8:07 ` Torreno, Alexis Czezar
2026-06-30 15:06 ` Guenter Roeck
2026-06-30 2:46 ` [PATCH 6/6] hwmon: (pmbus/max20830): add support for max20830c and max20840c Alexis Czezar Torreno
2026-06-30 2:54 ` sashiko-bot
2026-06-30 3:43 ` Guenter Roeck
2026-06-30 8:07 ` Torreno, Alexis Czezar
2026-06-30 15:04 ` Guenter Roeck
2026-07-02 2:50 ` Torreno, Alexis Czezar
2026-07-02 4:43 ` Guenter Roeck
2026-07-02 7:28 ` Torreno, Alexis Czezar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d306dab2-efcb-4626-b480-c4e8779cdeed@roeck-us.net \
--to=linux@roeck-us.net \
--cc=alexisczezar.torreno@analog.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.