From: "Nuno Sá" <noname.nuno@gmail.com>
To: "David Lechner" <dlechner@baylibre.com>,
"Mark Brown" <broonie@kernel.org>,
"Jonathan Cameron" <jic23@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Nuno Sá" <nuno.sa@analog.com>
Cc: "Uwe Kleine-König" <ukleinek@kernel.org>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"David Jander" <david@protonic.nl>,
"Martin Sperl" <kernel@martin.sperl.org>,
linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
linux-pwm@vger.kernel.org,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>
Subject: Re: [PATCH v6 04/17] spi: offload-trigger: add PWM trigger driver
Date: Tue, 17 Dec 2024 12:36:27 +0100 [thread overview]
Message-ID: <d329ec5e035ec89944a73457bf14111a7318b6e9.camel@gmail.com> (raw)
In-Reply-To: <20241211-dlech-mainline-spi-engine-offload-2-v6-4-88ee574d5d03@baylibre.com>
On Wed, 2024-12-11 at 14:54 -0600, David Lechner wrote:
> Add a new driver for a generic PWM trigger for SPI offloads.
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: David Lechner <dlechner@baylibre.com>
> ---
Still don't really agree with always checking against
SPI_OFFLOAD_TRIGGER_PERIODIC. But yeah...
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
>
> v6 changes:
> * Use dev instead of &pdev->dev
> * Swap order of "pwm" and "trigger" in name to follow "pwm-clock"
> precedent.
>
> v5 changes:
> * Updated to accommodate changes in other patches in this series.
> * Add MAINTAINERS entry.
>
> v4 changes: new patch in v4
> ---
> MAINTAINERS | 1 +
> drivers/spi/Kconfig | 12 +++
> drivers/spi/Makefile | 3 +
> drivers/spi/spi-offload-trigger-pwm.c | 162
> ++++++++++++++++++++++++++++++++++
> 4 files changed, 178 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index
> b2aa6f37743e48353c60e5973ea8126590c7f6d5..d8d72da5ac4bcab817a515774eb8db37a7e9
> 4f25 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -22131,6 +22131,7 @@ F: include/linux/mtd/spi-nor.h
>
> SPI OFFLOAD
> R: David Lechner <dlechner@baylibre.com>
> +F: drivers/spi/spi-offload-trigger-pwm.c
> F: drivers/spi/spi-offload.c
> F: include/linux/spi/spi-offload.h
> K: spi_offload
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index
> 02064a4e292815ec0213e2e446b4f90ed8855a52..2cfc14be869790f5226130428bb7cb40aadf
> b031 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -1320,4 +1320,16 @@ endif # SPI_SLAVE
> config SPI_DYNAMIC
> def_bool ACPI || OF_DYNAMIC || SPI_SLAVE
>
> +if SPI_OFFLOAD
> +
> +comment "SPI Offload triggers"
> +
> +config SPI_OFFLOAD_TRIGGER_PWM
> + tristate "SPI offload trigger using PWM"
> + depends on PWM
> + help
> + Generic SPI offload trigger implemented using PWM output.
> +
> +endif # SPI_OFFLOAD
> +
> endif # SPI
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index
> bb5fc20df21332232533c2e70c0cc230f6bcf27f..0068d170bc99c750c13376c4013991d927bb
> ac63 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -164,3 +164,6 @@ obj-$(CONFIG_SPI_AMD) += spi-amd.o
> # SPI slave protocol handlers
> obj-$(CONFIG_SPI_SLAVE_TIME) += spi-slave-time.o
> obj-$(CONFIG_SPI_SLAVE_SYSTEM_CONTROL) += spi-slave-system-control.o
> +
> +# SPI offload triggers
> +obj-$(CONFIG_SPI_OFFLOAD_TRIGGER_PWM) += spi-offload-trigger-pwm.o
> diff --git a/drivers/spi/spi-offload-trigger-pwm.c b/drivers/spi/spi-offload-
> trigger-pwm.c
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..b26d4437c589052709a8206f8314ffd08355
> 870e
> --- /dev/null
> +++ b/drivers/spi/spi-offload-trigger-pwm.c
> @@ -0,0 +1,162 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2024 Analog Devices Inc.
> + * Copyright (C) 2024 BayLibre, SAS
> + *
> + * Generic PWM trigger for SPI offload.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/spi/offload/provider.h>
> +#include <linux/types.h>
> +
> +struct spi_offload_trigger_pwm_state {
> + struct device *dev;
> + struct pwm_device *pwm;
> +};
> +
> +static bool spi_offload_trigger_pwm_match(struct spi_offload_trigger
> *trigger,
> + enum spi_offload_trigger_type type,
> + u64 *args, u32 nargs)
> +{
> + if (nargs)
> + return false;
> +
> + return type == SPI_OFFLOAD_TRIGGER_PERIODIC;
> +}
> +
> +static int spi_offload_trigger_pwm_validate(struct spi_offload_trigger
> *trigger,
> + struct spi_offload_trigger_config
> *config)
> +{
> + struct spi_offload_trigger_pwm_state *st =
> spi_offload_trigger_get_priv(trigger);
> + struct spi_offload_trigger_periodic *periodic = &config->periodic;
> + struct pwm_waveform wf = { };
> + int ret;
> +
> + if (config->type != SPI_OFFLOAD_TRIGGER_PERIODIC)
> + return -EINVAL;
> +
> + if (!periodic->frequency_hz)
> + return -EINVAL;
> +
> + wf.period_length_ns = DIV_ROUND_UP_ULL(NSEC_PER_SEC, periodic-
> >frequency_hz);
> + /* REVISIT: 50% duty-cycle for now - may add config parameter later
> */
> + wf.duty_length_ns = wf.period_length_ns / 2;
> +
> + ret = pwm_round_waveform_might_sleep(st->pwm, &wf);
> + if (ret < 0)
> + return ret;
> +
> + periodic->frequency_hz = DIV_ROUND_UP_ULL(NSEC_PER_SEC,
> wf.period_length_ns);
> +
> + return 0;
> +}
> +
> +static int spi_offload_trigger_pwm_enable(struct spi_offload_trigger
> *trigger,
> + struct spi_offload_trigger_config
> *config)
> +{
> + struct spi_offload_trigger_pwm_state *st =
> spi_offload_trigger_get_priv(trigger);
> + struct spi_offload_trigger_periodic *periodic = &config->periodic;
> + struct pwm_waveform wf = { };
> +
> + if (config->type != SPI_OFFLOAD_TRIGGER_PERIODIC)
> + return -EINVAL;
> +
> + if (!periodic->frequency_hz)
> + return -EINVAL;
> +
> + wf.period_length_ns = DIV_ROUND_UP_ULL(NSEC_PER_SEC, periodic-
> >frequency_hz);
> + /* REVISIT: 50% duty-cycle for now - may add config parameter later
> */
> + wf.duty_length_ns = wf.period_length_ns / 2;
> +
> + return pwm_set_waveform_might_sleep(st->pwm, &wf, false);
> +}
> +
> +static void spi_offload_trigger_pwm_disable(struct spi_offload_trigger
> *trigger)
> +{
> + struct spi_offload_trigger_pwm_state *st =
> spi_offload_trigger_get_priv(trigger);
> + struct pwm_waveform wf;
> + int ret;
> +
> + ret = pwm_get_waveform_might_sleep(st->pwm, &wf);
> + if (ret < 0) {
> + dev_err(st->dev, "failed to get waveform: %d\n", ret);
> + return;
> + }
> +
> + wf.duty_length_ns = 0;
> +
> + ret = pwm_set_waveform_might_sleep(st->pwm, &wf, false);
> + if (ret < 0)
> + dev_err(st->dev, "failed to disable PWM: %d\n", ret);
> +}
> +
> +static const struct spi_offload_trigger_ops spi_offload_trigger_pwm_ops = {
> + .match = spi_offload_trigger_pwm_match,
> + .validate = spi_offload_trigger_pwm_validate,
> + .enable = spi_offload_trigger_pwm_enable,
> + .disable = spi_offload_trigger_pwm_disable,
> +};
> +
> +static void spi_offload_trigger_pwm_release(void *data)
> +{
> + pwm_disable(data);
> +}
> +
> +static int spi_offload_trigger_pwm_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct spi_offload_trigger_info info = {
> + .fwnode = dev_fwnode(dev),
> + .ops = &spi_offload_trigger_pwm_ops,
> + };
> + struct spi_offload_trigger_pwm_state *st;
> + struct pwm_state state;
> + int ret;
> +
> + st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
> + if (!st)
> + return -ENOMEM;
> +
> + info.priv = st;
> + st->dev = dev;
> +
> + st->pwm = devm_pwm_get(dev, NULL);
> + if (IS_ERR(st->pwm))
> + return dev_err_probe(dev, PTR_ERR(st->pwm), "failed to get
> PWM\n");
> +
> + /* init with duty_cycle = 0, output enabled to ensure trigger off */
> + pwm_init_state(st->pwm, &state);
> + state.enabled = true;
> +
> + ret = pwm_apply_might_sleep(st->pwm, &state);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "failed to apply PWM
> state\n");
> +
> + ret = devm_add_action_or_reset(dev, spi_offload_trigger_pwm_release,
> st->pwm);
> + if (ret)
> + return ret;
> +
> + return devm_spi_offload_trigger_register(dev, &info);
> +}
> +
> +static const struct of_device_id spi_offload_trigger_pwm_of_match_table[] = {
> + { .compatible = "pwm-trigger" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, spi_offload_trigger_pwm_of_match_table);
> +
> +static struct platform_driver spi_offload_trigger_pwm_driver = {
> + .driver = {
> + .name = "pwm-trigger",
> + .of_match_table = spi_offload_trigger_pwm_of_match_table,
> + },
> + .probe = spi_offload_trigger_pwm_probe,
> +};
> +module_platform_driver(spi_offload_trigger_pwm_driver);
> +
> +MODULE_AUTHOR("David Lechner <dlechner@baylibre.com>");
> +MODULE_DESCRIPTION("Generic PWM trigger");
> +MODULE_LICENSE("GPL");
>
next prev parent reply other threads:[~2024-12-17 11:31 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-11 20:54 [PATCH v6 00/17] spi: axi-spi-engine: add offload support David Lechner
2024-12-11 20:54 ` [PATCH v6 01/17] spi: add basic support for SPI offloading David Lechner
2024-12-17 11:21 ` Nuno Sá
2024-12-11 20:54 ` [PATCH v6 02/17] spi: offload: add support for hardware triggers David Lechner
2024-12-17 11:30 ` Nuno Sá
2024-12-17 15:35 ` David Lechner
2024-12-11 20:54 ` [PATCH v6 03/17] dt-bindings: trigger-source: add generic PWM trigger source David Lechner
2024-12-14 14:25 ` Jonathan Cameron
2024-12-17 14:32 ` Rob Herring (Arm)
2024-12-11 20:54 ` [PATCH v6 04/17] spi: offload-trigger: add PWM trigger driver David Lechner
2024-12-17 11:36 ` Nuno Sá [this message]
2024-12-11 20:54 ` [PATCH v6 05/17] spi: add offload TX/RX streaming APIs David Lechner
2024-12-14 14:28 ` Jonathan Cameron
2024-12-17 11:43 ` Nuno Sá
2024-12-11 20:54 ` [PATCH v6 06/17] spi: dt-bindings: axi-spi-engine: add SPI offload properties David Lechner
2024-12-14 14:30 ` Jonathan Cameron
2024-12-17 14:33 ` Rob Herring (Arm)
2024-12-11 20:54 ` [PATCH v6 07/17] spi: axi-spi-engine: implement offload support David Lechner
2024-12-17 11:48 ` Nuno Sá
2024-12-11 20:54 ` [PATCH v6 08/17] iio: buffer-dmaengine: split requesting DMA channel from allocating buffer David Lechner
2024-12-14 14:37 ` Jonathan Cameron
2024-12-17 11:50 ` Nuno Sá
2024-12-11 20:54 ` [PATCH v6 09/17] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_with_handle() David Lechner
2024-12-14 14:39 ` Jonathan Cameron
2024-12-17 11:51 ` Nuno Sá
2024-12-11 20:54 ` [PATCH v6 10/17] iio: adc: ad7944: don't use storagebits for sizing David Lechner
2024-12-14 16:56 ` Jonathan Cameron
2024-12-17 11:52 ` Nuno Sá
2024-12-11 20:54 ` [PATCH v6 11/17] iio: adc: ad7944: add support for SPI offload David Lechner
2024-12-17 12:02 ` Nuno Sá
2024-12-11 20:54 ` [PATCH v6 12/17] doc: iio: ad7944: describe offload support David Lechner
2024-12-11 20:54 ` [PATCH v6 13/17] dt-bindings: iio: adc: adi,ad4695: add SPI offload properties David Lechner
2024-12-14 16:59 ` Jonathan Cameron
2024-12-17 14:36 ` Rob Herring (Arm)
2024-12-11 20:54 ` [PATCH v6 14/17] iio: adc: ad4695: Add support for SPI offload David Lechner
2024-12-17 12:15 ` Nuno Sá
2024-12-11 20:54 ` [PATCH v6 15/17] doc: iio: ad4695: add SPI offload support David Lechner
2024-12-11 20:54 ` [PATCH v6 16/17] iio: dac: ad5791: sort include directives David Lechner
2024-12-17 12:15 ` Nuno Sá
2024-12-11 20:54 ` [PATCH v6 17/17] iio: dac: ad5791: Add offload support David Lechner
2024-12-14 17:12 ` Jonathan Cameron
2024-12-17 12:18 ` Nuno Sá
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d329ec5e035ec89944a73457bf14111a7318b6e9.camel@gmail.com \
--to=noname.nuno@gmail.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=Michael.Hennerich@analog.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=david@protonic.nl \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=kernel@martin.sperl.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=ukleinek@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.