From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Raag Jadav <raag.jadav@intel.com>
Cc: Hans de Goede <hansg@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linus.walleij@linaro.org, brgl@bgdev.pl,
platform-driver-x86@vger.kernel.org, linux-gpio@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: Re: [PATCH v3 2/2] gpio: elkhartlake: Convert to auxiliary driver
Date: Wed, 19 Nov 2025 13:42:02 +0200 (EET) [thread overview]
Message-ID: <d6aa3721-0425-49e7-e5dd-8fdc8e7cb1d5@linux.intel.com> (raw)
In-Reply-To: <20251112034040.457801-3-raag.jadav@intel.com>
[-- Attachment #1: Type: text/plain, Size: 4067 bytes --]
On Wed, 12 Nov 2025, Raag Jadav wrote:
> Since PCI device should not be abusing platform device, MFD parent to
> platform child path is no longer being pursued for this driver. Convert
> it to auxiliary driver, which will be used by EHL PSE auxiliary device.
>
> Signed-off-by: Raag Jadav <raag.jadav@intel.com>
> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/gpio/Kconfig | 2 +-
> drivers/gpio/gpio-elkhartlake.c | 36 +++++++++++++++++----------------
> 2 files changed, 20 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 7ee3afbc2b05..d4b4451b4696 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -1413,7 +1413,7 @@ config HTC_EGPIO
>
> config GPIO_ELKHARTLAKE
> tristate "Intel Elkhart Lake PSE GPIO support"
> - depends on X86 || COMPILE_TEST
> + depends on INTEL_EHL_PSE_IO
> select GPIO_TANGIER
> help
> Select this option to enable GPIO support for Intel Elkhart Lake
> diff --git a/drivers/gpio/gpio-elkhartlake.c b/drivers/gpio/gpio-elkhartlake.c
> index 95de52d2cc63..b96e7928b6e5 100644
> --- a/drivers/gpio/gpio-elkhartlake.c
> +++ b/drivers/gpio/gpio-elkhartlake.c
> @@ -2,43 +2,46 @@
> /*
> * Intel Elkhart Lake PSE GPIO driver
> *
> - * Copyright (c) 2023 Intel Corporation.
> + * Copyright (c) 2023, 2025 Intel Corporation.
> *
> * Authors: Pandith N <pandith.n@intel.com>
> * Raag Jadav <raag.jadav@intel.com>
> */
>
> +#include <linux/auxiliary_bus.h>
> #include <linux/device.h>
> #include <linux/err.h>
> #include <linux/module.h>
> -#include <linux/platform_device.h>
> #include <linux/pm.h>
>
> +#include <linux/ehl_pse_io_aux.h>
> +
> #include "gpio-tangier.h"
>
> /* Each Intel EHL PSE GPIO Controller has 30 GPIO pins */
> #define EHL_PSE_NGPIO 30
>
> -static int ehl_gpio_probe(struct platform_device *pdev)
> +static int ehl_gpio_probe(struct auxiliary_device *adev, const struct auxiliary_device_id *id)
> {
> - struct device *dev = &pdev->dev;
> + struct device *dev = &adev->dev;
> + struct ehl_pse_io_data *data;
> struct tng_gpio *priv;
> - int irq, ret;
> + int ret;
>
> - irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> - return irq;
> + data = dev_get_platdata(dev);
> + if (!data)
> + return -ENODATA;
>
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
>
> - priv->reg_base = devm_platform_ioremap_resource(pdev, 0);
> + priv->reg_base = devm_ioremap_resource(dev, &data->mem);
> if (IS_ERR(priv->reg_base))
> return PTR_ERR(priv->reg_base);
>
> priv->dev = dev;
> - priv->irq = irq;
> + priv->irq = data->irq;
>
> priv->info.base = -1;
> priv->info.ngpio = EHL_PSE_NGPIO;
> @@ -51,25 +54,24 @@ static int ehl_gpio_probe(struct platform_device *pdev)
> if (ret)
> return dev_err_probe(dev, ret, "tng_gpio_probe error\n");
>
> - platform_set_drvdata(pdev, priv);
> + auxiliary_set_drvdata(adev, priv);
> return 0;
> }
>
> -static const struct platform_device_id ehl_gpio_ids[] = {
> - { "gpio-elkhartlake" },
> +static const struct auxiliary_device_id ehl_gpio_ids[] = {
> + { EHL_PSE_IO_NAME "." EHL_PSE_GPIO_NAME },
> { }
> };
> -MODULE_DEVICE_TABLE(platform, ehl_gpio_ids);
> +MODULE_DEVICE_TABLE(auxiliary, ehl_gpio_ids);
>
> -static struct platform_driver ehl_gpio_driver = {
> +static struct auxiliary_driver ehl_gpio_driver = {
> .driver = {
> - .name = "gpio-elkhartlake",
> .pm = pm_sleep_ptr(&tng_gpio_pm_ops),
> },
> .probe = ehl_gpio_probe,
> .id_table = ehl_gpio_ids,
> };
> -module_platform_driver(ehl_gpio_driver);
> +module_auxiliary_driver(ehl_gpio_driver);
>
> MODULE_AUTHOR("Pandith N <pandith.n@intel.com>");
> MODULE_AUTHOR("Raag Jadav <raag.jadav@intel.com>");
>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
--
i.
next prev parent reply other threads:[~2025-11-19 11:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-12 3:40 [PATCH v3 0/2] Introduce Intel Elkhart Lake PSE I/O Raag Jadav
2025-11-12 3:40 ` [PATCH v3 1/2] platform/x86/intel: " Raag Jadav
2025-11-19 11:27 ` Ilpo Järvinen
2025-11-12 3:40 ` [PATCH v3 2/2] gpio: elkhartlake: Convert to auxiliary driver Raag Jadav
2025-11-19 11:42 ` Ilpo Järvinen [this message]
2025-11-12 15:14 ` [PATCH v3 0/2] Introduce Intel Elkhart Lake PSE I/O Bartosz Golaszewski
2025-11-19 6:40 ` Raag Jadav
2025-11-19 7:29 ` Bartosz Golaszewski
2025-11-19 13:09 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d6aa3721-0425-49e7-e5dd-8fdc8e7cb1d5@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bartosz.golaszewski@linaro.org \
--cc=brgl@bgdev.pl \
--cc=hansg@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=raag.jadav@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.