From: Ritesh Harjani <riteshh@codeaurora.org>
To: Pramod Gurav <pramod.gurav@linaro.org>,
ulf.hansson@linaro.org, adrian.hunter@intel.com,
linux-mmc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: Re: [PATCH v4] mmc: sdhci-msm: Add pm_runtime and system PM support
Date: Thu, 20 Oct 2016 20:20:16 +0530 [thread overview]
Message-ID: <d7801576-e2b3-13a3-df8d-e203a628a445@codeaurora.org> (raw)
In-Reply-To: <20161018101624.27946-1-pramod.gurav@linaro.org>
Hi Pramod,
Thanks for this patch. Few minor comments.
I have tested your patch on db410c and 8996 based internal platform and
it works fine.
On 10/18/2016 3:46 PM, Pramod Gurav wrote:
> Provides runtime PM callbacks to enable and disable clock resources
> when idle. Also support system PM callbacks to be called during system
> suspend and resume.
>
> Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org>
> ---
>
> Tested on DB410C.
>
> Changes in v4:
> - Remove calls to sdhci_runtime_resume_host/sdhci_runtime_suspend_host
> from runtime callbacks as sdhc msm controller is capable of restoring
> it's register values after clocks are disabled and re-enabled.
>
> Changes in v3:
> - Added CONFIG_PM around runtime pm function.
> - Replaced msm suspend/resume with generic function directly
> - Use SET_SYSTEM_SLEEP_PM_OPS instead of late version
>
> Changes in v2:
> - Moved pm_rutime enabling before adding host
> - Handled pm_rutime in remove
> - Changed runtime handling with reference from sdhci-of-at91.c
>
> drivers/mmc/host/sdhci-msm.c | 66 +++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 65 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 8ef44a2a..33ec809 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -18,6 +18,7 @@
> #include <linux/of_device.h>
> #include <linux/delay.h>
> #include <linux/mmc/mmc.h>
> +#include <linux/pm_runtime.h>
> #include <linux/slab.h>
>
> #include "sdhci-pltfm.h"
> @@ -658,12 +659,26 @@ static int sdhci_msm_probe(struct platform_device *pdev)
> goto clk_disable;
> }
>
> + pm_runtime_get_noresume(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
Use a macro MSM_MMC_AUTOSUSPEND_DELAY_MS instead of using 50 directly here.
> + pm_runtime_use_autosuspend(&pdev->dev);
> +
> ret = sdhci_add_host(host);
> if (ret)
> - goto clk_disable;
> + goto pm_runtime_disable;
> +
> + platform_set_drvdata(pdev, host);
No need to set platform_set_drvdata here. sdhci_pltfm_init will do it
anyways.
> +
pm_runtime_mark_last_busy(&pdev->dev) can be added here.
> + pm_runtime_put_autosuspend(&pdev->dev);
>
> return 0;
>
> +pm_runtime_disable:
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_set_suspended(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> clk_disable:
> clk_disable_unprepare(msm_host->clk);
> pclk_disable:
> @@ -685,6 +700,11 @@ static int sdhci_msm_remove(struct platform_device *pdev)
> 0xffffffff);
>
> sdhci_remove_host(host, dead);
> +
> + pm_runtime_get_sync(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> +
> clk_disable_unprepare(msm_host->clk);
> clk_disable_unprepare(msm_host->pclk);
> if (!IS_ERR(msm_host->bus_clk))
> @@ -693,12 +713,56 @@ static int sdhci_msm_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM
> +static int sdhci_msm_runtime_suspend(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> +
> + clk_disable_unprepare(msm_host->clk);
> + clk_disable_unprepare(msm_host->pclk);
> +
> + return 0;
> +}
> +
> +static int sdhci_msm_runtime_resume(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> + int ret;
> +
> + ret = clk_prepare_enable(msm_host->clk);
> + if (ret) {
> + dev_err(dev, "clk_enable failed: %d\n", ret);
dev_err(dev, "clk enable failed for core_clk: %d\n", ret);
> + return ret;
> + }
> + ret = clk_prepare_enable(msm_host->pclk);
> + if (ret) {
> + dev_err(dev, "clk_enable failed: %d\n", ret);
dev_err(dev, "clk enable failed for iface_clk: %d\n", ret);
> + clk_disable_unprepare(msm_host->clk);
> + return ret;
> + }
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops sdhci_msm_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(sdhci_msm_runtime_suspend, sdhci_msm_runtime_resume,
> + NULL)
> +};
> +
> static struct platform_driver sdhci_msm_driver = {
> .probe = sdhci_msm_probe,
> .remove = sdhci_msm_remove,
> .driver = {
> .name = "sdhci_msm",
> .of_match_table = sdhci_msm_dt_match,
> + .pm = &sdhci_msm_pm_ops,
> },
> };
>
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-10-20 14:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-18 10:16 [PATCH v4] mmc: sdhci-msm: Add pm_runtime and system PM support Pramod Gurav
2016-10-19 7:14 ` Ulf Hansson
2016-10-20 13:08 ` Georgi Djakov
2016-10-21 4:18 ` Pramod Gurav
2016-10-20 14:50 ` Ritesh Harjani [this message]
2016-10-21 4:22 ` Pramod Gurav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d7801576-e2b3-13a3-df8d-e203a628a445@codeaurora.org \
--to=riteshh@codeaurora.org \
--cc=adrian.hunter@intel.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pramod.gurav@linaro.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.