From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Eck Date: Thu, 19 Aug 2004 15:15:41 +0000 Subject: Re: [LARTC] tc+mrtg Message-Id: List-Id: References: <014901c46d7d$0e58d9a0$15a02bca@gsd03> In-Reply-To: <014901c46d7d$0e58d9a0$15a02bca@gsd03> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I can't seem to find tcrrd2.pl on the site. On Fri, 23 Jul 2004 19:45:51 +0200, Stef Coene wrote: > On Tuesday 20 July 2004 07:43, Kristiadi Himawan wrote: > > I already use external script that fetch iptables mangle table from > > PREROUTING and POSTROUTING counter. > > But the traffic isn't really accurate, i found when there's bulk UDP > > traffic come to the shaper, my mrtg shown that > > the traffic shown bigger than allocated bandwidth for that class. So the > > question, it's possible to make script from tc command, > > that count bandwith acctually passing through the shaper. > You can patch snmp so you can get the tc counters and process them in a custom > script or use mrtg: > http://www.docum.org/docum.org/tc-snmp/ > > Stef > > -- > stef.coene@docum.org > "Using Linux as bandwidth manager" > http://www.docum.org/ > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/