From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000879]: (snd_)opl3sa2 (isa) doesn't work (fails on playback) on 2.6.x kernels
Date: Sat, 9 Jul 2005 11:13:13 +0200 [thread overview]
Message-ID: <da5498d8411c08ac3cc0476fb28893d0@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=879>
======================================================================
Reported By: iive
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 879
Category: ISA - opl3sa2
Reproducibility: always
Severity: block
Priority: normal
Status: new
Distribution: Slackware 10
Kernel Version: all 2.6.x kernel version (current 2.6.10)
======================================================================
Date Submitted: 02-03-2005 03:42 CET
Last Modified: 07-09-2005 11:13 CEST
======================================================================
Summary: (snd_)opl3sa2 (isa) doesn't work (fails on playback)
on 2.6.x kernels
Description:
It doesn't work on all 2.6.x kernel I have tried (current 2.6.10)
alsaconf doesn't detect the card as PnP, and fails to find it with
bruteforce.
When module is loaded by hand it shows no error, but on `aplay samle.wav`
I got
"ALSA /work/install/alsa-driver-1.0.5a/alsa-kernel/core/pcm_lib.c:2172:
playback
write error (DMA or IRQ trouble?"
on boot with 2.4.x kernel, everything magically works (alsaconf, aplay
etc..)
the bug is reported 4 months ago on
http://bugzilla.kernel.org/show_bug.cgi?id=3117
that's why some versions are old (but I had tried alsa-1.0.8 before
reposting this bug here)
======================================================================
----------------------------------------------------------------------
ahaning - 07-09-05 06:38
----------------------------------------------------------------------
I was able to get alsa to brute-force detect my opl3sa2 card in linux 2.4
and then copy the modules.conf to modprobe.conf and then (after installing
the drivers compiled for the currently-installed kernel) I can do
'alsasound start' and I get audio just fine in kernel 2.6(.12.2).
HTH.
FWIW, here is the modprobe.conf that was generated under kernel 2.6:
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.9rc3 ---
alias snd-card-0 snd-opl3sa2
alias sound-slot-0 snd-opl3sa2
options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x370 wss_port=0x530
dma1=3 dma2=1 irq=9
# --- END: Generated by ALSACONF, do not edit. ---
and here is the configuration generated under 2.4 (that works in 2.6,
too):
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.9 ---
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-opl3sa2
alias sound-slot-0 snd-opl3sa2
options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x370 wss_port=0x530
dma1=0 dma2=1 irq=11 isapnp=0
# --- END: Generated by ALSACONF, do not edit. ---
HTH.
-Andy
(If you need any other information, I'm probably better reached via email:
ahaning@gmail.com)
----------------------------------------------------------------------
jdthood - 07-09-05 11:13
----------------------------------------------------------------------
> btw have you took a look of the attached file?
I just looked at it now. I see that it contains a lot of information.
jdthood@turmeric:/tmp/isa_opl3sa2$ ls
fullog isapnp_after isapnp_before kernel/ lsmod proc/ sys/
Issue History
Date Modified Username Field Change
======================================================================
02-03-05 03:42 iive New Issue
02-03-05 03:42 iive File Added: isa_opl3sa2.tgz
02-03-05 03:42 iive Distribution => Slackware 10
02-03-05 03:42 iive Kernel Version => all 2.6.x kernel
version (current 2.6.10)
04-13-05 21:59 jdthood Note Added: 0004478
04-14-05 00:02 iive Note Added: 0004485
07-09-05 06:26 ahaning Note Added: 0005438
07-09-05 06:38 ahaning Note Edited: 0005438
07-09-05 11:13 jdthood Note Added: 0005439
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP,
AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar
next reply other threads:[~2005-07-09 9:13 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-09 9:13 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-08-10 11:30 [ALSA - driver 0000879]: (snd_)opl3sa2 (isa) doesn't work (fails on playback) on 2.6.x kernels bugtrack
2005-08-09 10:51 bugtrack
2005-08-09 10:48 bugtrack
2005-08-09 9:31 bugtrack
2005-08-09 1:00 bugtrack
2005-08-08 11:45 bugtrack
2005-08-07 13:24 bugtrack
2005-08-06 16:32 bugtrack
2005-08-06 6:37 bugtrack
2005-08-05 21:58 bugtrack
2005-08-05 11:47 bugtrack
2005-08-05 10:47 bugtrack
2005-08-05 6:44 bugtrack
2005-08-05 0:35 bugtrack
2005-08-04 12:51 bugtrack
2005-08-04 12:42 bugtrack
2005-08-04 11:25 bugtrack
2005-08-04 10:52 bugtrack
2005-08-04 6:52 bugtrack
2005-08-04 6:51 bugtrack
2005-08-03 13:17 bugtrack
2005-08-03 11:42 bugtrack
2005-08-03 9:42 bugtrack
2005-08-03 0:46 bugtrack
2005-08-02 20:16 bugtrack
2005-08-02 20:14 bugtrack
2005-07-28 3:17 bugtrack
2005-07-09 9:14 bugtrack
2005-07-09 4:26 bugtrack
2005-04-13 22:02 bugtrack
2005-04-13 19:59 bugtrack
2005-02-03 2:42 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=da5498d8411c08ac3cc0476fb28893d0@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.