[PATCH net-next 1/2] net: dsa: dsa_loop: remove usage of mdio_board_info

[Heiner Kallweit <hkallweit1@gmail.com>]

dsa_loop is the last remaining user of mdio_board_info. Let's remove
using mdio_board_info, so that support for it can be dropped from
phylib.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/dsa/Makefile          |  3 --
 drivers/net/dsa/dsa_loop.c        | 63 +++++++++++++++++++++++++++++--
 drivers/net/dsa/dsa_loop.h        | 20 ----------
 drivers/net/dsa/dsa_loop_bdinfo.c | 36 ------------------
 4 files changed, 60 insertions(+), 62 deletions(-)
 delete mode 100644 drivers/net/dsa/dsa_loop.h
 delete mode 100644 drivers/net/dsa/dsa_loop_bdinfo.c

diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index c0a534fe6..0f8ff4a1a 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -2,9 +2,6 @@
 obj-$(CONFIG_NET_DSA_BCM_SF2)	+= bcm-sf2.o
 bcm-sf2-objs			:= bcm_sf2.o bcm_sf2_cfp.o
 obj-$(CONFIG_NET_DSA_LOOP)	+= dsa_loop.o
-ifdef CONFIG_NET_DSA_LOOP
-obj-$(CONFIG_FIXED_PHY)		+= dsa_loop_bdinfo.o
-endif
 obj-$(CONFIG_NET_DSA_KS8995) 	+= ks8995.o
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c
index 8112515d5..720738807 100644
--- a/drivers/net/dsa/dsa_loop.c
+++ b/drivers/net/dsa/dsa_loop.c
@@ -17,7 +17,19 @@
 #include <linux/dsa/loop.h>
 #include <net/dsa.h>
 
-#include "dsa_loop.h"
+#define DSA_LOOP_NUM_PORTS	6
+#define DSA_LOOP_CPU_PORT	(DSA_LOOP_NUM_PORTS - 1)
+#define NUM_FIXED_PHYS		(DSA_LOOP_NUM_PORTS - 2)
+
+struct dsa_loop_pdata {
+	/* Must be first, such that dsa_register_switch() can access this
+	 * without gory pointer manipulations
+	 */
+	struct dsa_chip_data cd;
+	const char *name;
+	unsigned int enabled_ports;
+	const char *netdev;
+};
 
 static struct dsa_loop_mib_entry dsa_loop_mibs[] = {
 	[DSA_LOOP_PHY_READ_OK]	= { "phy_read_ok", },
@@ -27,6 +39,7 @@ static struct dsa_loop_mib_entry dsa_loop_mibs[] = {
 };
 
 static struct phy_device *phydevs[PHY_MAX_ADDR];
+static struct mdio_device *switch_mdiodev;
 
 enum dsa_loop_devlink_resource_id {
 	DSA_LOOP_DEVLINK_PARAM_ID_VTU,
@@ -392,6 +405,42 @@ static void dsa_loop_phydevs_unregister(void)
 	}
 }
 
+static int __init dsa_loop_create_switch_mdiodev(void)
+{
+	static struct dsa_loop_pdata dsa_loop_pdata = {
+		.cd = {
+			.port_names[0] = "lan1",
+			.port_names[1] = "lan2",
+			.port_names[2] = "lan3",
+			.port_names[3] = "lan4",
+			.port_names[DSA_LOOP_CPU_PORT] = "cpu",
+		},
+		.name = "DSA mockup driver",
+		.enabled_ports = 0x1f,
+		.netdev = "eth0",
+	};
+	struct mii_bus *bus;
+	int ret = -ENODEV;
+
+	bus = mdio_find_bus("fixed-0");
+	if (WARN_ON(!bus))
+		return ret;
+
+	switch_mdiodev = mdio_device_create(bus, 31);
+	if (IS_ERR(switch_mdiodev))
+		goto out;
+
+	strscpy(switch_mdiodev->modalias, "dsa-loop");
+	switch_mdiodev->dev.platform_data = &dsa_loop_pdata;
+
+	ret = mdio_device_register(switch_mdiodev);
+	if (ret)
+		mdio_device_free(switch_mdiodev);
+out:
+	put_device(&bus->dev);
+	return ret;
+}
+
 static int __init dsa_loop_init(void)
 {
 	struct fixed_phy_status status = {
@@ -402,12 +451,19 @@ static int __init dsa_loop_init(void)
 	unsigned int i;
 	int ret;
 
+	ret = dsa_loop_create_switch_mdiodev();
+	if (ret)
+		return ret;
+
 	for (i = 0; i < NUM_FIXED_PHYS; i++)
 		phydevs[i] = fixed_phy_register(&status, NULL);
 
 	ret = mdio_driver_register(&dsa_loop_drv);
-	if (ret)
+	if (ret) {
 		dsa_loop_phydevs_unregister();
+		mdio_device_remove(switch_mdiodev);
+		mdio_device_free(switch_mdiodev);
+	}
 
 	return ret;
 }
@@ -417,10 +473,11 @@ static void __exit dsa_loop_exit(void)
 {
 	mdio_driver_unregister(&dsa_loop_drv);
 	dsa_loop_phydevs_unregister();
+	mdio_device_remove(switch_mdiodev);
+	mdio_device_free(switch_mdiodev);
 }
 module_exit(dsa_loop_exit);
 
-MODULE_SOFTDEP("pre: dsa_loop_bdinfo");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Florian Fainelli");
 MODULE_DESCRIPTION("DSA loopback driver");
diff --git a/drivers/net/dsa/dsa_loop.h b/drivers/net/dsa/dsa_loop.h
deleted file mode 100644
index 93e5c15d0..000000000
--- a/drivers/net/dsa/dsa_loop.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DSA_LOOP_H
-#define __DSA_LOOP_H
-
-struct dsa_chip_data;
-
-struct dsa_loop_pdata {
-	/* Must be first, such that dsa_register_switch() can access this
-	 * without gory pointer manipulations
-	 */
-	struct dsa_chip_data cd;
-	const char *name;
-	unsigned int enabled_ports;
-	const char *netdev;
-};
-
-#define DSA_LOOP_NUM_PORTS	6
-#define DSA_LOOP_CPU_PORT	(DSA_LOOP_NUM_PORTS - 1)
-
-#endif /* __DSA_LOOP_H */
diff --git a/drivers/net/dsa/dsa_loop_bdinfo.c b/drivers/net/dsa/dsa_loop_bdinfo.c
deleted file mode 100644
index 14ca42491..000000000
--- a/drivers/net/dsa/dsa_loop_bdinfo.c
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-
-#include "dsa_loop.h"
-
-static struct dsa_loop_pdata dsa_loop_pdata = {
-	.cd = {
-		.port_names[0] = "lan1",
-		.port_names[1] = "lan2",
-		.port_names[2] = "lan3",
-		.port_names[3] = "lan4",
-		.port_names[DSA_LOOP_CPU_PORT] = "cpu",
-	},
-	.name = "DSA mockup driver",
-	.enabled_ports = 0x1f,
-	.netdev = "eth0",
-};
-
-static const struct mdio_board_info bdinfo = {
-	.bus_id	= "fixed-0",
-	.modalias = "dsa-loop",
-	.mdio_addr = 31,
-	.platform_data = &dsa_loop_pdata,
-};
-
-static int __init dsa_loop_bdinfo_init(void)
-{
-	return mdiobus_register_board_info(&bdinfo, 1);
-}
-arch_initcall(dsa_loop_bdinfo_init)
-
-MODULE_DESCRIPTION("DSA mock-up switch driver");
-MODULE_LICENSE("GPL");
-- 
2.51.0