From: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
To: Shuicheng Lin <shuicheng.lin@intel.com>, intel-xe@lists.freedesktop.org
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>,
Matthew Brost <matthew.brost@intel.com>
Subject: Re: [PATCH v5] drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
Date: Fri, 04 Sep 2026 17:03:15 +0200 [thread overview]
Message-ID: <da977e02df3f538c2df4b3c934e2a3a96484646c.camel@linux.intel.com> (raw)
In-Reply-To: <20260901213331.458982-1-shuicheng.lin@intel.com>
On Tue, 2026-09-01 at 21:33 +0000, Shuicheng Lin wrote:
> __xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime
> PM
> reference. Shrinking a bo outside system memory invalidates its GPU
> mappings, which needs the device resumed, so while it is runtime
> suspended the page table zap trips an assert and the TLB invalidation
> returns -ENODEV:
>
> WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at
> xe_bo_move_notify+0x1fc/0x450 [xe]
> xe_bo_shrink+0x20f/0x2b0 [xe]
> __xe_shrinker_walk+0x174/0x410 [xe]
> xe_shrinker_scan+0x10c/0x1e0 [xe]
> do_shrink_slab+0x176/0x7e0
> drop_caches_sysctl_handler+0x9c/0xf0
>
> Take a reference before walking a memory type other than XE_PL_SYSTEM
> and stop there if the device is not active, queueing the shrinker PM
> worker so a later scan can pick those bos up. Stop the walk once the
> scan target is met, so a satisfied scan does not wake the device.
> System memory is still reclaimed while the device is suspended.
>
> Gate this on xe_device_is_l2_flush_optimized(), the same condition
> under
> which xe_bo_trigger_rebind() issues the invalidation for a non-fault-
> mode
> vm, so reclaim is unaffected elsewhere. The System CCS copy already
> has
> its own reference in xe_bo_shrink().
>
> Only a non-fault-mode vm can reach this, since a fault-mode vm
> requires
> LR mode and that holds a runtime PM reference for the vm's lifetime.
>
> Reproduced with igt@xe_madvise@dontneed-before-exec while the GPU is
> runtime suspended.
>
> v2: simplify needs_rpm check. (Matt)
> retarget Fixes tag since the issue occurs with the non-fault-mode
> path added by 4e7ebff69aed.
> v3: handle this in xe_shrinker.c instead of xe_bo.c (Thomas)
> v4: stop the walk once the scan target is met. (Sashiko)
> v5: drop the freed page accounting patch from the series. (Sashiko)
>
> Fixes: 4e7ebff69aed ("drm/xe/xe3p_lpg: flush shrinker bo cachelines
> manually")
> Assisted-by: Claude:claude-opus-5
> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
> Cc: Matthew Brost <matthew.brost@intel.com>
> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
> ---
> drivers/gpu/drm/xe/xe_shrinker.c | 39 ++++++++++++++++++++++++------
> --
> 1 file changed, 30 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_shrinker.c
> b/drivers/gpu/drm/xe/xe_shrinker.c
> index 83374cd57660..db4d11f0a156 100644
> --- a/drivers/gpu/drm/xe/xe_shrinker.c
> +++ b/drivers/gpu/drm/xe/xe_shrinker.c
> @@ -54,12 +54,14 @@ xe_shrinker_mod_pages(struct xe_shrinker
> *shrinker, long shrinkable, long purgea
> write_unlock(&shrinker->lock);
> }
>
> -static s64 __xe_shrinker_walk(struct xe_device *xe,
> +static s64 __xe_shrinker_walk(struct xe_shrinker *shrinker,
> struct ttm_operation_ctx *ctx,
> const struct xe_bo_shrink_flags flags,
> unsigned long to_scan, unsigned long
> *scanned)
> {
> + struct xe_device *xe = shrinker->xe;
> unsigned int mem_type;
> + bool rpm = false;
> s64 freed = 0, lret;
>
> for (mem_type = XE_PL_SYSTEM; mem_type <= XE_PL_TT;
> ++mem_type) {
> @@ -71,16 +73,31 @@ static s64 __xe_shrinker_walk(struct xe_device
> *xe,
> .trylock_only = true,
> };
>
> + if (*scanned >= to_scan)
> + break;
Consider adding this at the end of the loop instead. Also, those pre-
existing errors that Sashiko reported mandates a separate -fixes patch,
preferrably as the first patch of this series.
> +
> if (!man || !man->use_tt)
> continue;
>
> + if (mem_type != XE_PL_SYSTEM && !rpm &&
> + xe_device_is_l2_flush_optimized(xe)) {
> + if (!xe_pm_runtime_get_if_active(xe)) {
> + queue_work(xe->unordered_wq,
> + &shrinker->pm_worker);
> + break;
> + }
> + rpm = true;
> + }
> +
This is the actual new functionality. I think we actually have a chance
here to get runtime pm sync, avoiding queuing a work. Perhaps consider
breaking out the following block of xe_shrinker_runtime_pm_get() into a
separate helper function:
if (!xe_pm_runtime_get_if_active(xe)) {
if (xe_rpm_reclaim_safe(xe) &&
!ttm_bo_shrink_avoid_wait()) {
xe_pm_runtime_get(xe);
return true;
}
queue_work(xe->unordered_wq, &shrinker->pm_worker);
return false;
}
> ttm_bo_lru_for_each_reserved_guarded(&curs, man,
> &arg, ttm_bo) {
> if (!ttm_bo_shrink_suitable(ttm_bo, ctx))
> continue;
>
> lret = xe_bo_shrink(ctx, ttm_bo, flags,
> scanned);
> - if (lret < 0)
> - return lret;
> + if (lret < 0) {
> + freed = lret;
> + goto out;
> + }
This was a pre-existing, issue right? Belongs in a separate patch.
Thanks,
Thomas
>
> freed += lret;
> if (*scanned >= to_scan)
> @@ -90,6 +107,10 @@ static s64 __xe_shrinker_walk(struct xe_device
> *xe,
> xe_assert(xe, !IS_ERR(ttm_bo));
> }
>
> +out:
> + if (rpm)
> + xe_pm_runtime_put(xe);
> +
> return freed;
> }
>
> @@ -99,7 +120,7 @@ static s64 __xe_shrinker_walk(struct xe_device
> *xe,
> * add writeback. This avoids stalls and explicit writebacks with
> light or
> * moderate memory pressure.
> */
> -static s64 xe_shrinker_walk(struct xe_device *xe,
> +static s64 xe_shrinker_walk(struct xe_shrinker *shrinker,
> struct ttm_operation_ctx *ctx,
> const struct xe_bo_shrink_flags flags,
> unsigned long to_scan, unsigned long
> *scanned)
> @@ -110,14 +131,14 @@ static s64 xe_shrinker_walk(struct xe_device
> *xe,
>
> swap(no_wait_gpu, ctx->no_wait_gpu);
> save_flags.writeback = false;
> - lret = __xe_shrinker_walk(xe, ctx, save_flags, to_scan,
> scanned);
> + lret = __xe_shrinker_walk(shrinker, ctx, save_flags,
> to_scan, scanned);
> swap(no_wait_gpu, ctx->no_wait_gpu);
> if (lret < 0 || *scanned >= to_scan)
> return lret;
>
> freed = lret;
> if (!ctx->no_wait_gpu) {
> - lret = __xe_shrinker_walk(xe, ctx, save_flags,
> to_scan, scanned);
> + lret = __xe_shrinker_walk(shrinker, ctx, save_flags,
> to_scan, scanned);
> if (lret < 0)
> return lret;
> freed += lret;
> @@ -126,7 +147,7 @@ static s64 xe_shrinker_walk(struct xe_device *xe,
> }
>
> if (flags.writeback) {
> - lret = __xe_shrinker_walk(xe, ctx, flags, to_scan,
> scanned);
> + lret = __xe_shrinker_walk(shrinker, ctx, flags,
> to_scan, scanned);
> if (lret < 0)
> return lret;
> freed += lret;
> @@ -226,7 +247,7 @@ static unsigned long xe_shrinker_scan(struct
> shrinker *shrink, struct shrink_con
> runtime_pm = xe_shrinker_runtime_pm_get(shrinker, false,
> nr_to_scan, can_backup);
>
> if (purgeable && nr_scanned < nr_to_scan) {
> - lret = xe_shrinker_walk(shrinker->xe, &ctx,
> shrink_flags,
> + lret = xe_shrinker_walk(shrinker, &ctx,
> shrink_flags,
> nr_to_scan, &nr_scanned);
> if (lret >= 0)
> freed += lret;
> @@ -242,7 +263,7 @@ static unsigned long xe_shrinker_scan(struct
> shrinker *shrink, struct shrink_con
>
> shrink_flags.purge = false;
>
> - lret = xe_shrinker_walk(shrinker->xe, &ctx, shrink_flags,
> + lret = xe_shrinker_walk(shrinker, &ctx, shrink_flags,
> nr_to_scan, &nr_scanned);
> if (lret >= 0)
> freed += lret;
next prev parent reply other threads:[~2026-09-04 15:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 21:33 [PATCH v5] drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory Shuicheng Lin
2026-09-01 21:41 ` sashiko-bot
2026-09-02 8:33 ` ✓ CI.KUnit: success for drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory (rev2) Patchwork
2026-09-02 9:45 ` ✓ Xe.CI.BAT: " Patchwork
2026-09-02 18:15 ` ✓ Xe.CI.FULL: " Patchwork
2026-09-04 15:03 ` Thomas Hellström [this message]
2026-09-04 20:36 ` [PATCH v5] drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory Lin, Shuicheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=da977e02df3f538c2df4b3c934e2a3a96484646c.camel@linux.intel.com \
--to=thomas.hellstrom@linux.intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=matthew.brost@intel.com \
--cc=shuicheng.lin@intel.com \
--cc=tejas.upadhyay@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.