Re: ***Spam*** [PATCH 2/8] wifi: mt76: mt7996: add txpower setting support

[Ben Greear <greearb@candelatech.com>]

On 3/1/24 12:12, Ben Greear wrote:
> On 12/7/23 13:01, Ben Greear wrote:
>> On 12/7/23 09:15, shayne.chen@mediatek.com wrote:
>>> On Fri, 2023-12-01 at 15:40 -0800, Ben Greear wrote:
>>>>
>>>> External email : Please do not click links or open attachments until
>>>> you have verified the sender or the content.
>>>>   On 11/2/23 03:02, Shayne Chen wrote:
>>>>> Add support for setting txpower from upper layer and configuring
>>>> per-rate
>>>>> txpower limit table.
>>>>
>>>> Hello Shayne,
>>>
>>> Hi Ben,
>>>>
>>>>   From what I can tell, this patch causes STA vdevs to no longer send
>>>> probe
>>>> requests when trying to associate.  I bisected to this in Felix's
>>>> tree that holds
>>>> this patch.
>>>>
>>>> Tested on x86-64, mtk7996 radio.  Specifically
>>>> debugged on 2.4Ghz radio, but I think it affects 5Ghz too.
>>>>
>>> I have done some tests but didn't face this issue. Could you also use
>>> the newer firmware to test if it still happens?
> 
> Hello Shayne,
> 
> I rebased on 6.8, and started adding some debugging around this issue.

I received a patch from Chad that fixes this problem, the cmd size was wrong for one
reason or another.

Thanks,
Ben