[U-Boot-Users] Re: CF 5282 fec.c

[Jens Scharsig <esw@bus-elektronik.de>]

Hallo Zachary,

I read the mail list and discover your implementation.
My board works on network.

Thanks Jens

Zachary Landau schrieb:
>>I'm new on U-Boot and work on a MCF5282 port. I have modify the cvs
>>source and U-Boot runs on my own MCF5282 board (I get a promt on serial
>>line). But i get "Tx not ready" and "Tx Timeout" messages for each
>>ethernet access.
>>I discover the fec.c, and find out that only 10MBit haft duplex is use.
>>Is there in implementation for full 100MBit use?
> 
> 
> Jens,
> 
> Search the mailing list archives.  There are multiple posts about 5282
> ports, and some specifically about the fec.
> 
> --
> Zachary P. Landau <kapheine@gmail.com>
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
> July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
> core and dual graphics technology at this free one hour event hosted by HP,
> AMD, and NVIDIA.  To register visit http://www.hp.com/go/dualwebinar