From: Paul Webster <pjwebster@gmail.com>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Broadcom BCM2035 Firmware
Date: Thu, 18 Aug 2005 22:13:09 +1000 [thread overview]
Message-ID: <dc98d8d905081805131f658b62@mail.gmail.com> (raw)
In-Reply-To: <1124206678.7466.21.camel@pegasus>
Hi Marcel,
The relavant secion of /proc/bus/usb/devices says:
........ 8>< ........ SNIP ........ ><8 ........
T: Bus=3D02 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 3 Spd=3D12 MxC=
h=3D 0
D: Ver=3D 2.00 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0a5c ProdID=3D2035 Rev=3D 1.00
S: Manufacturer=3DBroadcom Corp
S: Product=3DBCM2035B
C:* #Ifs=3D 3 Cfg#=3D 1 Atr=3Da0 MxPwr=3D100mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
I: If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 32 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 32 Ivl=3D1ms
I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms
I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms
I: If#=3D 2 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driver=
=3D(none)
E: Ad=3D84(I) Atr=3D02(Bulk) MxPS=3D 32 Ivl=3D0ms
E: Ad=3D04(O) Atr=3D02(Bulk) MxPS=3D 32 Ivl=3D0ms
........ 8>< ........ SNIP ........ ><8 ........
After issuing rmmod for all the bluetooth related modules, as well as
"rmmod -f hci_usb", I gave a "modprobe usb_hci reset=3D1" and then
"hciconfig up" gave:
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 377:10 SCO MTU: 16:0
DOWN=20
RX bytes:83 acl:0 sco:0 events:10 errors:0
TX bytes:37 acl:0 sco:0 commands:10 errors:0
=20
I still had to issue "hciconfig hci0 up" to bring up the interface,
before "hidd --search" was able to reconnect my mouse, even though the
BD Address is still blank.
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-08-18 12:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-14 15:41 [Bluez-users] Broadcom BCM2035 Firmware Paul Webster
2005-08-16 15:37 ` Marcel Holtmann
2005-08-18 12:13 ` Paul Webster [this message]
2005-08-19 14:46 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dc98d8d905081805131f658b62@mail.gmail.com \
--to=pjwebster@gmail.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.