From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Subject: Re: [PATCH 2/5] drm/i915/dsi: s/eotp_pkt/eot_pkt/
Date: Thu, 26 Mar 2026 17:22:16 +0200 [thread overview]
Message-ID: <dd598a54a852038b91659752d3357220d2a54d68@intel.com> (raw)
In-Reply-To: <20260326111814.9800-3-ville.syrjala@linux.intel.com>
On Thu, 26 Mar 2026, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> eotp == "End of Transmission Packet". Drop the redundant
> extra 'p' from 'eotp_pkt', and make the thing a boolean
> while at it.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/display/icl_dsi.c | 2 +-
> drivers/gpu/drm/i915/display/intel_dsi.h | 3 +--
> drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 4 ++--
> drivers/gpu/drm/i915/display/vlv_dsi.c | 2 +-
> 4 files changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index a763f2b13ff2..6ea37929198c 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -711,7 +711,7 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
> dsi_trans = dsi_port_to_transcoder(port);
> tmp = intel_de_read(display, DSI_TRANS_FUNC_CONF(dsi_trans));
>
> - if (intel_dsi->eotp_pkt)
> + if (intel_dsi->eot_pkt)
> tmp &= ~EOTP_DISABLED;
> else
> tmp |= EOTP_DISABLED;
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h
> index 489d26ffd235..8e39d2b52c54 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.h
> @@ -80,8 +80,7 @@ struct intel_dsi {
> /* NON_BURST_SYNC_PULSE, NON_BURST_SYNC_EVENTS, or BURST_MODE */
> int video_mode;
>
> - /* eot for MIPI_EOT_DISABLE register */
> - u8 eotp_pkt;
> + bool eot_pkt;
> u8 clock_stop;
>
> u8 escape_clk_div;
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> index 18755a8e613d..51f6a5b82cb2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> @@ -718,7 +718,7 @@ void intel_dsi_log_params(struct intel_dsi *intel_dsi)
> "burst" : "<unknown>");
> drm_printf(&p, "Burst mode ratio %d\n", intel_dsi->burst_mode_ratio);
> drm_printf(&p, "Reset timer %d\n", intel_dsi->rst_timer_val);
> - drm_printf(&p, "Eot %s\n", str_enabled_disabled(intel_dsi->eotp_pkt));
> + drm_printf(&p, "EoT packet %s\n", str_enabled_disabled(intel_dsi->eot_pkt));
> drm_printf(&p, "Clockstop %s\n", str_enabled_disabled(!intel_dsi->clock_stop));
> drm_printf(&p, "Mode %s\n", intel_dsi->operation_mode ? "command" : "video");
> if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
> @@ -770,7 +770,7 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>
> drm_dbg_kms(display->drm, "\n");
>
> - intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
> + intel_dsi->eot_pkt = !mipi_config->eot_pkt_disabled;
> intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
> intel_dsi->lane_count = mipi_config->lane_cnt + 1;
> intel_dsi->pixel_format =
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index 36591d724638..d4db73c184e5 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1367,7 +1367,7 @@ static void intel_dsi_prepare(struct intel_encoder *encoder,
> }
>
> tmp = 0;
> - if (intel_dsi->eotp_pkt == 0)
> + if (!intel_dsi->eot_pkt)
> tmp |= EOT_DISABLE;
> if (intel_dsi->clock_stop)
> tmp |= CLOCKSTOP;
--
Jani Nikula, Intel
next prev parent reply other threads:[~2026-03-26 15:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-26 11:18 [PATCH 0/5] drm/i915/dsi: Some DSI fixes and improvements Ville Syrjala
2026-03-26 11:18 ` [PATCH 1/5] drm/i915/dsi: Don't do DSC horizontal timing adjustments in command mode Ville Syrjala
2026-03-26 15:20 ` Jani Nikula
2026-03-26 11:18 ` [PATCH 2/5] drm/i915/dsi: s/eotp_pkt/eot_pkt/ Ville Syrjala
2026-03-26 15:22 ` Jani Nikula [this message]
2026-03-26 11:18 ` [PATCH 3/5] drm/i915/dsi: Make 'clock_stop' boolean Ville Syrjala
2026-03-26 13:40 ` Jani Nikula
2026-03-26 14:02 ` Ville Syrjälä
2026-03-26 15:01 ` Jani Nikula
2026-03-26 15:16 ` Ville Syrjälä
2026-03-26 15:22 ` Jani Nikula
2026-03-26 11:18 ` [PATCH 4/5] drm/i915/dsi: Fill BLLPs with blanking packets if requested Ville Syrjala
2026-03-26 15:23 ` Jani Nikula
2026-03-26 11:18 ` [PATCH 5/5] drm/i915/dsi: Place clock into LP during LPM " Ville Syrjala
2026-03-26 15:24 ` Jani Nikula
2026-03-26 11:24 ` ✗ CI.checkpatch: warning for drm/i915/dsi: Some DSI fixes and improvements Patchwork
2026-03-26 11:26 ` ✓ CI.KUnit: success " Patchwork
2026-03-26 12:00 ` ✓ Xe.CI.BAT: " Patchwork
2026-03-26 12:34 ` ✓ i915.CI.BAT: " Patchwork
2026-03-27 0:36 ` ✓ Xe.CI.FULL: " Patchwork
2026-03-27 6:14 ` ✗ i915.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dd598a54a852038b91659752d3357220d2a54d68@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.