Re: [Bluez-devel] TPL (transmit power level)

[Flávio <flavio.henriques@gmail.com>]

Hi Steven Singer,
Thanks for the explanation you are tottaly right and i am wrong! :)

I see that you are used to power control (bluetooth), and you are
related to CSR!
My dongle use one of CSR chips, here it=B4s some details:

chip version : BlueCore2 ; the dongle is Conceptronic CBT100U
HCI 17,11 ;
SCO mapping : HCI ;
HCI ver:1,1 ;
HCI rev: 0X460;
LMP ver:1,1 ;
LMP subver:0X46;

I can=B4t connect with the news group (news.csr.com)! So i hope that you
could help me in some question:

Is there anyway for me to change the step size of the tpl to a smaller
number (2 dBm)?
And have more range in the values of tpl?
Where can i find newest versions of firmware and there changes ? (in
conceptronic site don=B4t have)

I try to find information about firmware used in my dongle and it=B4s
very dificult..almost nothing!

I hope you can help me.
Thanks for the help.

Regards Fl=E1vio
Regards


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel