All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Nerijus Baliūnas" <nerijus@users.sourceforge.net>
To: ath10k@lists.infradead.org
Subject: QCA6174 firmware crash
Date: Sat, 19 Feb 2022 15:30:30 +0200	[thread overview]
Message-ID: <e004286a32d506994d3805f624cba00a@users.sourceforge.net> (raw)

Hello,

07:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless 
Network Adapter [168c:003e] (rev 20)

Firmware is newest:

# ethtool -i wlp7s0
driver: ath10k_pci
version: 5.16.9-200.fc35.x86_64
firmware-version: SW_RM.1.1.1-00157-QCARMSWPZ-1
expansion-rom-version:.
bus-info: 0000:07:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no

# dmesg | grep ath10k
[    6.698345] ath10k_pci 0000:07:00.0: pci irq msi oper_irq_mode 2 irq_mode 
0 reset_mode 0
[    6.927480] ath10k_pci 0000:07:00.0: qca6174 hw2.1 target 0x05010000 
chip_id 0x003405ff sub 11ad:0804
[    6.928453] ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 1 tracing 0 
dfs 0 testmode 0
[    6.929729] ath10k_pci 0000:07:00.0: firmware ver 
SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 features ignore-otp,no-4addr-pad crc32 
10bf8e08
[    6.995609] ath10k_pci 0000:07:00.0: board_file api 2 bmi_id N/A crc32 
ae2e275a
[    8.223964] ath10k_pci 0000:07:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp 
max-sta 32 raw 0 hwcrypto 1

It crashes every time I try to connect to TP-Link Archer MR600 v2 Firmware 
Version:‪1.5.0 0.9.1 v0001.0 Build 210914 wifi router:

ath10k_pci 0000:07:00.0: firmware crashed! (guid 
c1610eff-6185-467f-aba7-26ec9d9b8605)
ath10k_pci 0000:07:00.0: qca6174 hw2.1 target 0x05010000 chip_id 0x003405ff 
sub 11ad:0804
ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
ath10k_pci 0000:07:00.0: firmware ver SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 
features ignore-otp,no-4addr-pad crc32 10bf8e08
ath10k_pci 0000:07:00.0: board_file api 2 bmi_id N/A crc32 ae2e275a
ath10k_pci 0000:07:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 
0 hwcrypto 1
ath10k_pci 0000:07:00.0: firmware register dump:
ath10k_pci 0000:07:00.0: [00]: 0x05010000 0x00000000 0x0092E4DC 0x0EB2E199
ath10k_pci 0000:07:00.0: [04]: 0x0092E4DC 0x00060130 0x00000018 0x0041A760
ath10k_pci 0000:07:00.0: [08]: 0x0EB2E185 0x00400000 0x00000000 0x000A5C88
ath10k_pci 0000:07:00.0: [12]: 0x00000009 0x00000000 0x0096C09C 0x0096C0A7
ath10k_pci 0000:07:00.0: [16]: 0x0096BDBC 0x009287BD 0x00000000 0x009287BD
ath10k_pci 0000:07:00.0: [20]: 0x4092E4DC 0x0041A710 0x00000000 0x0F000000
ath10k_pci 0000:07:00.0: [24]: 0x809432A7 0x0041A770 0x0040D45C 0xC092E4DC
ath10k_pci 0000:07:00.0: [28]: 0x80942BC4 0x0041A790 0x0EB2E185 0x00400000
ath10k_pci 0000:07:00.0: [32]: 0x80947BA7 0x0041A7B0 0x004050A8 0x0040E074
ath10k_pci 0000:07:00.0: [36]: 0x809BDECC 0x0041A7D0 0x004050A8 0x0040E074
ath10k_pci 0000:07:00.0: [40]: 0x8099638C 0x0041A7F0 0x004050A8 0x00000000
ath10k_pci 0000:07:00.0: [44]: 0x80992076 0x0041A810 0x00408420 0x0046FFE8
ath10k_pci 0000:07:00.0: [48]: 0x80996BD3 0x0041A830 0x00408420 0x00000000
ath10k_pci 0000:07:00.0: [52]: 0x800B4405 0x0041A850 0x00422318 0x00005002
ath10k_pci 0000:07:00.0: [56]: 0x809A6C34 0x0041A8E0 0x0042932C 0x0042CA44
ath10k_pci 0000:07:00.0: Copy Engine register dump:
ath10k_pci 0000:07:00.0: [00]: 0x00034400   1   1   3   3
ath10k_pci 0000:07:00.0: [01]: 0x00034800  13  13 272 273
ath10k_pci 0000:07:00.0: [02]: 0x00034c00  13  13  76  77
ath10k_pci 0000:07:00.0: [03]: 0x00035000  27  27  28  27
ath10k_pci 0000:07:00.0: [04]: 0x00035400 1629 1629 112  48
ath10k_pci 0000:07:00.0: [05]: 0x00035800   0   0   0   0
ath10k_pci 0000:07:00.0: [06]: 0x00035c00  27  27  27  27
ath10k_pci 0000:07:00.0: [07]: 0x00036000   1   1   1   1
ath10k_pci 0000:07:00.0: failed to create WMI vdev 1: -108


ath10k_pci 0000:07:00.0: firmware crashed! (guid 
016cc818-beee-4422-b9dd-fee9fd612a03)
ath10k_pci 0000:07:00.0: qca6174 hw2.1 target 0x05010000 chip_id 0x003405ff 
sub 11ad:0804
ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
ath10k_pci 0000:07:00.0: firmware ver SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 
features ignore-otp,no-4addr-pad crc32 10bf8e08
ath10k_pci 0000:07:00.0: board_file api 2 bmi_id N/A crc32 ae2e275a
ath10k_pci 0000:07:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 
0 hwcrypto 1
ath10k_pci 0000:07:00.0: firmware register dump:
ath10k_pci 0000:07:00.0: [00]: 0x05010000 0x00000000 0x0092E4DC 0x1029E198
ath10k_pci 0000:07:00.0: [04]: 0x0092E4DC 0x00060130 0x00000018 0x0041A760
ath10k_pci 0000:07:00.0: [08]: 0x1029E184 0x00400000 0x00000000 0x000A5C88
ath10k_pci 0000:07:00.0: [12]: 0x0000000D 0x00000000 0x0096C09C 0x0096C0A7
ath10k_pci 0000:07:00.0: [16]: 0x00000004 0x0040A090 0x0000FFFF 0x00000002
ath10k_pci 0000:07:00.0: [20]: 0x80996343 0x0041A7D0 0x00408420 0x0040D45C
ath10k_pci 0000:07:00.0: [24]: 0x80942BC4 0x0041A790 0x1029E184 0x00400000
ath10k_pci 0000:07:00.0: [28]: 0x0041A7B0 0x0041A790 0x00000024 0x00000001
ath10k_pci 0000:07:00.0: [32]: 0x80947BA7 0x0041A7B0 0x004050A8 0x0040E074
ath10k_pci 0000:07:00.0: [36]: 0x1029E164 0x00000000 0x00000000 0x00000001
ath10k_pci 0000:07:00.0: [40]: 0x809BDECC 0x0041A7D0 0x004050A8 0x0040E074
ath10k_pci 0000:07:00.0: [44]: 0x004124C4 0x004050D4 0x00000000 0x00404D9C
ath10k_pci 0000:07:00.0: [48]: 0x8099638C 0x0041A7F0 0x004050A8 0x00000000
ath10k_pci 0000:07:00.0: [52]: 0x00000000 0x004124C4 0x004050CC 0x00000005
ath10k_pci 0000:07:00.0: [56]: 0x80992076 0x0041A810 0x00408420 0x0046FFE8
ath10k_pci 0000:07:00.0: Copy Engine register dump:
ath10k_pci 0000:07:00.0: [00]: 0x00034400   1   1   3   3
ath10k_pci 0000:07:00.0: [01]: 0x00034800   5   5 488 489
ath10k_pci 0000:07:00.0: [02]: 0x00034c00   8   8  71  72
ath10k_pci 0000:07:00.0: [03]: 0x00035000  25  25  25  25
ath10k_pci 0000:07:00.0: [04]: 0x00035400 665 665 142  78
ath10k_pci 0000:07:00.0: [05]: 0x00035800   0   0   0   0
ath10k_pci 0000:07:00.0: [06]: 0x00035c00  26  26  26  26
ath10k_pci 0000:07:00.0: [07]: 0x00036000   1   1   1   1
ath10k_pci 0000:07:00.0: failed to submit keepalive on vdev 1: -108
ath10k_pci 0000:07:00.0: failed to disable keepalive on vdev 1: -108

Regards,
Nerijus

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2022-02-19 13:39 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-19 13:30 Nerijus Baliūnas [this message]
2022-02-20 22:32 ` QCA6174 firmware crash Nerijus Baliūnas
  -- strict thread matches above, loose matches on Subject: below --
2016-04-25 20:35 Michael Ney
2016-04-26  6:08 ` Michal Kazior
2016-04-26 19:52   ` Michael Ney
2016-04-27  6:42     ` Michal Kazior
2016-04-27 22:43       ` Michael Ney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e004286a32d506994d3805f624cba00a@users.sourceforge.net \
    --to=nerijus@users.sourceforge.net \
    --cc=ath10k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.