Re: [PATCH] usb: xhci-ring: set all cancelled_td's cancel_status to TD_CLEARING_CACHE

[wat@codeaurora.org]

On 2021-08-13 17:09, Mathias Nyman wrote:
> On 13.8.2021 11.44, wat@codeaurora.org wrote:
>> On 2021-08-13 15:25, Ikjoon Jang wrote:
>>> Hi,
>>> 
>>> On Fri, Aug 13, 2021 at 10:44 AM Tao Wang <wat@codeaurora.org> wrote:
>>>> 
>>>> USB SSD may fail to unmount if disconnect during data transferring.
>>>> 
>>>> it stuck in usb_kill_urb() due to urb use_count will not become 
>>>> zero,
>>>> this means urb giveback is not happen.
>>>> in xhci_handle_cmd_set_deq() will giveback urb if td's cancel_status
>>>> equal to TD_CLEARING_CACHE,
>>>> but in xhci_invalidate_cancelled_tds(), only last canceled td's
>>>> cancel_status change to TD_CLEARING_CACHE,
>>>> thus giveback only happen to last urb.
>>>> 
>>>> this change set all cancelled_td's cancel_status to 
>>>> TD_CLEARING_CACHE
>>>> rather than the last one, so all urb can giveback.
>>>> 
>>>> Signed-off-by: Tao Wang <wat@codeaurora.org>
>>>> ---
>>>>  drivers/usb/host/xhci-ring.c | 24 ++++++++++++------------
>>>>  1 file changed, 12 insertions(+), 12 deletions(-)
>>>> 
>>>> diff --git a/drivers/usb/host/xhci-ring.c 
>>>> b/drivers/usb/host/xhci-ring.c
>>>> index 8fea44b..c7dd7c0 100644
>>>> --- a/drivers/usb/host/xhci-ring.c
>>>> +++ b/drivers/usb/host/xhci-ring.c
>>>> @@ -960,19 +960,19 @@ static int 
>>>> xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
>>>>                         td_to_noop(xhci, ring, td, false);
>>>>                         td->cancel_status = TD_CLEARED;
>>>>                 }
>>>> -       }
>>>> -       if (cached_td) {
>>>> -               cached_td->cancel_status = TD_CLEARING_CACHE;
>>>> -
>>>> -               err = xhci_move_dequeue_past_td(xhci, slot_id, 
>>>> ep->ep_index,
>>>> -                                               
>>>> cached_td->urb->stream_id,
>>>> -                                               cached_td);
>>>> -               /* Failed to move past cached td, try just setting 
>>>> it noop */
>>>> -               if (err) {
>>>> -                       td_to_noop(xhci, ring, cached_td, false);
>>>> -                       cached_td->cancel_status = TD_CLEARED;
>>>> +               if (cached_td) {
>>>> +                       cached_td->cancel_status = 
>>>> TD_CLEARING_CACHE;
>>>> +
>>>> +                       err = xhci_move_dequeue_past_td(xhci, 
>>>> slot_id, ep->ep_index,
>>>> +                                                       
>>>> cached_td->urb->stream_id,
>>>> +                                                       cached_td);
>>>> +                       /* Failed to move past cached td, try just 
>>>> setting it noop */
>>>> +                       if (err) {
>>>> +                               td_to_noop(xhci, ring, cached_td, 
>>>> false);
>>>> +                               cached_td->cancel_status = 
>>>> TD_CLEARED;
>>>> +                       }
>>>> +                       cached_td = NULL;
>>>>                 }
>>>> -               cached_td = NULL;
>>> 
>>> I think we can call xhci_move_dequeue_past_td() just once to
>>> the last halted && cancelled TD in a ring.
>>> 
>>> But that might need to compare two TDs to see which one is
>>> the latter, I'm not sure how to do this well. :-/
>>> 
>>> if (!cached_td || cached_td < td)
>>>   cached_td = td;
>>> 
>> 
>> thanks, I think you are correct that we can call 
>> xhci_move_dequeue_past_td() just once to
>>  the last halted && cancelled TD in a ring,
>> but the set status "cached_td->cancel_status = TD_CLEARING_CACHE;" 
>> should be every cancelled TD.
>> I am not very good at td and ring, I have a question why we need to
>> compare two TDs to see which one is the latter.
> 
> I'm debugging the exact same issue.
> For normal endpoints (no streams) it should be enough to set
> cancel_td->cancel_status = TD_CLEARING_CACHE
> in the TD_DIRTY and TD_HALTED case.
> 
> We don't need to move the dq past the last cancelled TD as other
> cancelled TDs are set to no-op, and
> the command to move the dq will flush the xHC controllers TD cache and
> read the no-ops.
> (just make sure we call xhci_move_dequeue_past_td() _after_
> overwriting cancelled TDs with no-op)
> 
> Streams get trickier as each endpoint has several rings, and we might
> need to move the dq pointer for
> many stream rings on that endpoint. This needs more work as we
> shouldn't start the endpoint before all
> the all move dq commands complete. i.e. the current  ep->ep_state &=
> ~SET_DEQ_PENDING isn't enough.
> 
> -Mathias
ok, thanks, please tell me if you have a great solution after debugging, 
I still need to learn from you.