From: Yonghong Song <yonghong.song@linux.dev>
To: "Jose E. Marchesi" <jose.marchesi@oracle.com>, bpf@vger.kernel.org
Cc: Eduard Zingerman <eddyz87@gmail.com>
Subject: Re: [PATCH] bpf: use r constraint instead of p constraint in selftests
Date: Tue, 23 Jan 2024 11:07:10 -0800 [thread overview]
Message-ID: <e2247f21-3400-42b3-b346-a743bbce7677@linux.dev> (raw)
In-Reply-To: <20240123181309.19853-1-jose.marchesi@oracle.com>
On 1/23/24 10:13 AM, Jose E. Marchesi wrote:
> Some of the BPF selftests use the "p" constraint in inline assembly
> snippets, for input operands for MOV (rN = rM) instructions.
>
> This is mainly done via the __imm_ptr macro defined in
> tools/testing/selftests/bpf/progs/bpf_misc.h:
>
> #define __imm_ptr(name) [name]"p"(&name)
>
> Example:
>
> int consume_first_item_only(void *ctx)
> {
> struct bpf_iter_num iter;
> asm volatile (
> /* create iterator */
> "r1 = %[iter];"
> [...]
> :
> : __imm_ptr(iter)
> : CLOBBERS);
> [...]
> }
>
> The "p" constraint is a tricky one. It is documented in the GCC manual
> section "Simple Constraints":
>
> An operand that is a valid memory address is allowed. This is for
> ``load address'' and ``push address'' instructions.
>
> p in the constraint must be accompanied by address_operand as the
> predicate in the match_operand. This predicate interprets the mode
> specified in the match_operand as the mode of the memory reference for
> which the address would be valid.
>
> There are two problems:
>
> 1. It is questionable whether that constraint was ever intended to be
> used in inline assembly templates, because its behavior really
> depends on compiler internals. A "memory address" is not the same
> than a "memory operand" or a "memory reference" (constraint "m"), and
> in fact its usage in the template above results in an error in both
> x86_64-linux-gnu and bpf-unkonwn-none:
>
> foo.c: In function ‘bar’:
> foo.c:6:3: error: invalid 'asm': invalid expression as operand
> 6 | asm volatile ("r1 = %[jorl]" : : [jorl]"p"(&jorl));
> | ^~~
>
> I would assume the same happens with aarch64, riscv, and most/all
> other targets in GCC, that do not accept operands of the form A + B
> that are not wrapped either in a const or in a memory reference.
>
> To avoid that error, the usage of the "p" constraint in internal GCC
> instruction templates is supposed to be complemented by the 'a'
> modifier, like in:
>
> asm volatile ("r1 = %a[jorl]" : : [jorl]"p"(&jorl));
>
> Internally documented (in GCC's final.cc) as:
>
> %aN means expect operand N to be a memory address
> (not a memory reference!) and print a reference
> to that address.
>
> That works because when the modifier 'a' is found, GCC prints an
> "operand address", which is not the same than an "operand".
>
> But...
>
> 2. Even if we used the internal 'a' modifier (we shouldn't) the 'rN =
> rM' instruction really requires a register argument. In cases
> involving automatics, like in the examples above, we easily end with:
>
> bar:
> #APP
> r1 = r10-4
> #NO_APP
>
> In other cases we could conceibly also end with a 64-bit label that
> may overflow the 32-bit immediate operand of `rN = imm32'
> instructions:
>
> r1 = foo
>
> All of which is clearly wrong.
>
> clang happens to do "the right thing" in the current usage of __imm_ptr
> in the BPF tests, because even with -O2 it seems to "reload" the
> fp-relative address of the automatic to a register like in:
>
> bar:
> r1 = r10
> r1 += -4
> #APP
> r1 = r1
> #NO_APP
>
> Which is what GCC would generate with -O0. Whether this is by chance
> or by design, the compiler shouln't be expected to do that reload
> driven by the "p" constraint.
>
> This patch changes the usage of the "p" constraint in the BPF
> selftests macros to use the "r" constraint instead. If a register is
> what is required, we should let the compiler know.
>
> Previous discussion in bpf@vger:
> https://lore.kernel.org/bpf/87h6p5ebpb.fsf@oracle.com/T/#ef0df83d6975c34dff20bf0dd52e078f5b8ca2767
>
> Tested in bpf-next master.
> No regressions.
>
> Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
> Cc: Yonghong Song <yonghong.song@linux.dev>
> Cc: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
next prev parent reply other threads:[~2024-01-23 19:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-23 18:13 [PATCH] bpf: use r constraint instead of p constraint in selftests Jose E. Marchesi
2024-01-23 19:07 ` Yonghong Song [this message]
2024-01-24 0:00 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e2247f21-3400-42b3-b346-a743bbce7677@linux.dev \
--to=yonghong.song@linux.dev \
--cc=bpf@vger.kernel.org \
--cc=eddyz87@gmail.com \
--cc=jose.marchesi@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.