Re: [PATCH] watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ

[Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>]

On 2021-01-28 07:03, Stephen Boyd wrote:
> Quoting Sai Prakash Ranjan (2021-01-26 07:02:41)
>> As per register documentation, QCOM_WDT_ENABLE_IRQ which is BIT(1)
>> of watchdog control register is wakeup interrupt enable bit and
>> not related to bark interrupt at all, BIT(0) is used for that.
>> So remove incorrect usage of this bit when supporting bark irq for
>> pre-timeout notification. Currently with this bit set and bark
>> interrupt specified, pre-timeout notification and/or watchdog
>> reset/bite does not occur.
> 
> It looks like the QCOM_WDT_ENABLE_IRQ bit is to catch a problem where a
> pending irq is unmasked but the watchdog irq isn't handled in time? So
> some sort of irq storm?
> 

In sleep mode, this bit is used to enable unmasked irq to wakeup
watchdog timer. The watchdog counter can be brought out of
reset either by writing 1 to WDOG_RESET or setting this BIT(1) to 1.

>> 
>> Fixes: 36375491a439 ("watchdog: qcom: support pre-timeout when the 
>> bark irq is available")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
>> ---
> 
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> 

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation