From: "Barnabás Czémán" <barnabas.czeman@mainlining.org>
To: Amir Hanip <killdeath104@gmail.com>
Cc: andersson@kernel.org, konradybcio@kernel.org,
linux-arm-msm@vger.kernel.org, abelvesa@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
krzk+dt@kernel.org, linux-kernel@vger.kernel.org,
robh@kernel.org, a39skl@gmail.com,
konrad.dybcio@oss.qualcomm.com
Subject: Re: [PATCH v3 2/3] arm64: dts: qcom: sm6115-xiaomi-lemon: Split out a common dtsi
Date: Sat, 07 Nov 2026 18:49:34 +0100 [thread overview]
Message-ID: <e7a2581e121a9f2addb995ac27ffd322@mainlining.org> (raw)
In-Reply-To: <20261107141432.39099-3-killdeath104@gmail.com>
On 2026-11-07 15:14, Amir Hanip wrote:
> Move the nodes shared with the other Xiaomi SM6115 variants (Redmi 9T
> and Poco M3) into sm6115-xiaomi-lime-common.dtsi, so that the other
> variants can reuse them. No functional change intended: the
> decompiled lemon DTS is identical before and after, except for the
> numbering of auto-generated phandles.
>
> Signed-off-by: Amir Hanip <killdeath104@gmail.com>
> ---
> .../boot/dts/qcom/sm6115-xiaomi-lemon.dts | 317 +----------------
> .../dts/qcom/sm6115-xiaomi-lime-common.dtsi | 335 ++++++++++++++++++
> 2 files changed, 336 insertions(+), 316 deletions(-)
> create mode 100644
> arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
> b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
> index 881e05b701..2caaca3033 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
> @@ -5,41 +5,17 @@
>
> /dts-v1/;
>
> -#include "sm6115.dtsi"
> -#include "pm6125.dtsi"
> -#include "pmi632.dtsi"
> #include <dt-bindings/leds/common.h>
> -
> -/delete-node/ &pil_adsp_mem;
> -/delete-node/ &pil_gpu_mem;
> -/delete-node/ &pil_ipa_fw_mem;
> -/delete-node/ &pil_ipa_gsi_mem;
> +#include "sm6115-xiaomi-lime-common.dtsi"
>
> / {
> model = "Xiaomi Redmi 9T";
> compatible = "xiaomi,lemon", "qcom,sm6115";
> - chassis-type = "handset";
>
> aliases {
> mmc0 = &sdhc_2;
> };
>
> - chosen {
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - framebuffer0: framebuffer@5c000000 {
> - compatible = "simple-framebuffer";
> - reg = <0 0x5c000000 0 (2340 * 1080 * 4)>;
> - width = <1080>;
> - height = <2340>;
> - stride = <(1080 * 4)>;
> - format = "a8r8g8b8";
> - clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
> - };
> - };
> -
> backlight_dsi: backlight-dsi {
> compatible = "led-backlight";
> leds = <&led_backlight>;
> @@ -49,38 +25,12 @@ backlight_dsi: backlight-dsi {
> status = "disabled";
> };
>
> - gpio-keys {
> - compatible = "gpio-keys";
> -
> - pinctrl-0 = <&vol_up_n>;
> - pinctrl-names = "default";
> -
> - key-volume-up {
> - label = "Volume Up";
> - linux,code = <KEY_VOLUMEUP>;
> - gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
> - debounce-interval = <15>;
> - linux,can-disable;
> - wakeup-source;
> - };
> - };
> -
> reserved-memory {
> pil_adsp_mem: memory@53400000 {
> reg = <0x0 0x53400000 0x0 0x2600000>;
> no-map;
> };
Hi,
As I have written in the previous revision lemon have the same adsp mem
range
This is from MIUI dmesg:
[ 0.000000] OF: reserved mem: initialized node
pil_adsp_region@53800000, compatible id removed-dma-pool
And from MIUI /sys/frimware/fdt
pil_adsp_mem: pil_adsp_region@53800000 {
compatible = "removed-dma-pool";
no-map;
reg = <0x00 0x53800000 0x00 0x2200000>;
phandle = <0x1e>;
};
>
> - pil_ipa_fw_mem: memory@55a00000 {
> - reg = <0x0 0x55a00000 0x0 0x10000>;
> - no-map;
> - };
> -
> - pil_ipa_gsi_mem: memory@55a10000 {
> - reg = <0x0 0x55a10000 0x0 0x5000>;
> - no-map;
> - };
> -
Same for GPU
[ 0.000000] OF: reserved mem: initialized node gpu_region@55A15000,
compatible id removed-dma-pool
pil_gpu_mem: gpu_region@55A15000 {
compatible = "removed-dma-pool";
no-map;
reg = <0x00 0x55a15000 0x00 0x2000>;
phandle = <0x1e5>;
};
> pil_gpu_mem: memory@fa400000 {
> reg = <0x0 0xfa400000 0x0 0x2000>;
> no-map;
> @@ -108,19 +58,6 @@ vph_pwr: vph-pwr-regulator {
> };
> };
>
> -&dispcc {
> - /* Prevent simplefb from dying until we wire panel driver */
> - status = "disabled";
> -};
> -
> -&gpi_dma0 {
> - status = "okay";
> -};
> -
> -&gpu {
> - status = "okay";
> -};
> -
> &i2c1 {
> status = "okay";
>
> @@ -158,118 +95,13 @@ &mdss_dsi0_out {
> data-lanes = <0 1 2 3>;
> };
>
> -&pil_cdsp_mem {
> - reg = <0x0 0x51a00000 0x0 0xa00000>;
> -};
> -
> -&pm6125_gpios {
> - vol_up_n: vol-up-n-state {
> - pins = "gpio5";
> - function = "normal";
> - power-source = <0>;
> - bias-pull-up;
> - input-enable;
> - };
> -};
> -
> -&pmi632_typec {
> - status = "okay";
> -
> - connector {
> - compatible = "usb-c-connector";
> -
> - power-role = "dual";
> - data-role = "dual";
> - self-powered;
> -
> - typec-power-opmode = "default";
> - pd-disable;
> -
> - vbus-supply = <&pmi632_vbus>;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> - pmi632_hs_in: endpoint {
> - remote-endpoint = <&usb_dwc3_hs>;
> - };
> - };
> -
> - port@1 {
> - reg = <1>;
> - pmi632_ss_in: endpoint {
> - remote-endpoint = <&usb_qmpphy_out>;
> - };
> - };
> - };
> - };
> -};
> -
> -&pmi632_vbus {
> - regulator-min-microamp = <500000>;
> - regulator-max-microamp = <1000000>;
> -
> - status = "okay";
> -};
> -
> -&pon_pwrkey {
> - status = "okay";
> -};
> -
> -&pon_resin {
> - linux,code = <KEY_VOLUMEDOWN>;
> -
> - status = "okay";
> -};
> -
> -&qupv3_id_0 {
> - status = "okay";
> -};
> -
> -&remoteproc_adsp {
> - status = "okay";
> -};
> -
> -&remoteproc_cdsp {
> - status = "okay";
> -};
> -
> -&remoteproc_mpss {
> - status = "okay";
> -};
> -
> &rpm_requests {
> regulators-0 {
> - compatible = "qcom,rpm-pm6125-regulators";
> -
> - pm6125_s6: s6 {
> - regulator-min-microvolt = <304000>;
> - regulator-max-microvolt = <1456000>;
> - };
> -
> pm6125_s7: s7 {
> regulator-min-microvolt = <1280000>;
> regulator-max-microvolt = <2080000>;
> };
>
> - pm6125_s8: s8 {
> - regulator-min-microvolt = <1064000>;
> - regulator-max-microvolt = <1304000>;
> - };
> -
> - pm6125_l1: l1 {
> - regulator-min-microvolt = <952000>;
> - regulator-max-microvolt = <1152000>;
> - };
> -
> - pm6125_l4: l4 {
> - regulator-min-microvolt = <488000>;
> - regulator-max-microvolt = <1000000>;
> - };
> -
> pm6125_l5: l5 {
> regulator-min-microvolt = <1648000>;
> regulator-max-microvolt = <2960000>;
> @@ -278,11 +110,6 @@ pm6125_l5: l5 {
> regulator-always-on;
> };
>
> - pm6125_l6: l6 {
> - regulator-min-microvolt = <576000>;
> - regulator-max-microvolt = <656000>;
> - };
> -
> pm6125_l7: l7 {
> /* sdhci2 vdd-io-bias supply */
> regulator-min-microvolt = <1256000>;
> @@ -291,51 +118,11 @@ pm6125_l7: l7 {
> regulator-always-on;
> };
>
> - pm6125_l8: l8 {
> - regulator-min-microvolt = <400000>;
> - regulator-max-microvolt = <728000>;
> - };
> -
> - pm6125_l9: l9 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <2000000>;
> - };
> -
> - pm6125_l10: l10 {
> - regulator-min-microvolt = <1704000>;
> - regulator-max-microvolt = <1904000>;
> - };
> -
> pm6125_l11: l11 {
> regulator-min-microvolt = <1768000>;
> regulator-max-microvolt = <1952000>;
> };
>
> - pm6125_l12: l12 {
> - regulator-min-microvolt = <1624000>;
> - regulator-max-microvolt = <1984000>;
> - };
> -
> - pm6125_l13: l13 {
> - regulator-min-microvolt = <1504000>;
> - regulator-max-microvolt = <1952000>;
> - };
> -
> - pm6125_l14: l14 {
> - regulator-min-microvolt = <1704000>;
> - regulator-max-microvolt = <1904000>;
> - };
> -
> - pm6125_l15: l15 {
> - regulator-min-microvolt = <2920000>;
> - regulator-max-microvolt = <3232000>;
> - };
> -
> - pm6125_l16: l16 {
> - regulator-min-microvolt = <1704000>;
> - regulator-max-microvolt = <1904000>;
> - };
> -
> pm6125_l17: l17 {
> regulator-min-microvolt = <1152000>;
> regulator-max-microvolt = <1384000>;
> @@ -346,21 +133,6 @@ pm6125_l18: l18 {
> regulator-max-microvolt = <1232000>;
> };
>
> - pm6125_l19: l19 {
> - regulator-min-microvolt = <1624000>;
> - regulator-max-microvolt = <3304000>;
> - };
> -
> - pm6125_l20: l20 {
> - regulator-min-microvolt = <1624000>;
> - regulator-max-microvolt = <3304000>;
> - };
> -
> - pm6125_l21: l21 {
> - regulator-min-microvolt = <2400000>;
> - regulator-max-microvolt = <3600000>;
> - };
> -
> pm6125_l22: l22 {
> regulator-min-microvolt = <2952000>;
> regulator-max-microvolt = <2960000>;
> @@ -369,11 +141,6 @@ pm6125_l22: l22 {
> regulator-always-on;
> };
>
> - pm6125_l23: l23 {
> - regulator-min-microvolt = <3200000>;
> - regulator-max-microvolt = <3400000>;
> - };
> -
> pm6125_l24: l24 {
> regulator-min-microvolt = <2704000>;
> regulator-max-microvolt = <3600000>;
> @@ -382,23 +149,9 @@ pm6125_l24: l24 {
> };
>
> &sdhc_2 {
> - cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
> -
> - pinctrl-0 = <&sdc2_state_on>, <&sdc2_cd_on>;
> - pinctrl-1 = <&sdc2_state_off>, <&sdc2_cd_off>;
> - pinctrl-names = "default", "sleep";
> -
> - vmmc-supply = <&pm6125_l22>;
> - vqmmc-supply = <&pm6125_l5>;
> /* No binding for vdd-io-bias on L7*/
> no-sdio;
> no-mmc;
> -
> - status = "okay";
> -};
> -
> -&sleep_clk {
> - clock-frequency = <32764>;
> };
>
> &spi2 {
> @@ -406,8 +159,6 @@ &spi2 {
> };
>
> &tlmm {
> - gpio-reserved-ranges = <14 4>; /* Fingerprint SPI */
> -
> lm3692x_bl_active: lm3692x-active-state {
> pins = "gpio99";
> function = "gpio";
> @@ -422,20 +173,6 @@ mdss_dsi_active: mdss-dsi-active-state {
> bias-disable;
> };
>
> - sdc2_cd_on: sdc2-cd-on-state {
> - pins = "gpio88";
> - function = "gpio";
> - drive-strength = <2>;
> - bias-pull-up;
> - };
> -
> - sdc2_cd_off: sdc2-cd-off-state {
> - pins = "gpio88";
> - function = "gpio";
> - drive-strength = <2>;
> - bias-disable;
> - };
> -
> te_active: te-active-state {
> pins = "gpio81";
> function = "mdp_vsync";
> @@ -443,55 +180,3 @@ te_active: te-active-state {
> bias-pull-down;
> };
> };
> -
> -&ufs_mem_hc {
> - vcc-max-microamp = <600000>;
> - vcc-supply = <&pm6125_l24>;
> - vccq2-max-microamp = <600000>;
> - vccq2-supply = <&pm6125_l11>;
> - vdd-hba-supply = <&pm6125_l18>;
> -
> - status = "okay";
> -};
> -
> -&ufs_mem_phy {
> - vdda-phy-supply = <&pm6125_l4>;
> - vdda-pll-supply = <&pm6125_l12>;
> -
> - status = "okay";
> -};
> -
> -&usb {
> - status = "okay";
> -};
> -
> -&usb_dwc3 {
> - maximum-speed = "high-speed";
> -};
> -
> -&usb_dwc3_hs {
> - remote-endpoint = <&pmi632_hs_in>;
> -};
> -
> -&usb_hsphy {
> - vdd-supply = <&pm6125_l4>;
> - vdda-pll-supply = <&pm6125_l12>;
> - vdda-phy-dpdm-supply = <&pm6125_l15>;
> -
> - status = "okay";
> -};
> -
> -&usb_qmpphy {
> - vdda-phy-supply = <&pm6125_l4>;
> - vdda-pll-supply = <&pm6125_l12>;
> -
> - status = "okay";
> -};
> -
> -&usb_qmpphy_out {
> - remote-endpoint = <&pmi632_ss_in>;
> -};
> -
> -&xo_board {
> - clock-frequency = <19200000>;
> -};
> diff --git a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi
> b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi
> new file mode 100644
> index 0000000000..16883e35b5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2026 Adam Skladowski <a39skl@gmail.com>
> + */
> +
> +#include "sm6115.dtsi"
> +#include "pm6125.dtsi"
> +#include "pmi632.dtsi"
> +
> +/delete-node/ &pil_adsp_mem;
> +/delete-node/ &pil_gpu_mem;
> +/delete-node/ &pil_ipa_fw_mem;
> +/delete-node/ &pil_ipa_gsi_mem;
> +
> +/ {
> + chassis-type = "handset";
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer0: framebuffer@5c000000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0x5c000000 0 (2340 * 1080 * 4)>;
> + width = <1080>;
> + height = <2340>;
> + stride = <(1080 * 4)>;
> + format = "a8r8g8b8";
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-0 = <&vol_up_n>;
> + pinctrl-names = "default";
> +
> + key-volume-up {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
> + debounce-interval = <15>;
> + linux,can-disable;
> + wakeup-source;
> + };
> + };
> +
> + reserved-memory {
> + pil_ipa_fw_mem: memory@55a00000 {
> + reg = <0x0 0x55a00000 0x0 0x10000>;
> + no-map;
> + };
> +
> + pil_ipa_gsi_mem: memory@55a10000 {
> + reg = <0x0 0x55a10000 0x0 0x5000>;
> + no-map;
> + };
> + };
> +};
> +
> +&dispcc {
> + /* Prevent simplefb from dying until we wire panel driver */
> + status = "disabled";
> +};
> +
> +&gpi_dma0 {
> + status = "okay";
> +};
> +
> +&gpu {
> + status = "okay";
> +};
> +
> +&pil_cdsp_mem {
> + reg = <0x0 0x51a00000 0x0 0xa00000>;
> +};
> +
> +&pm6125_gpios {
> + vol_up_n: vol-up-n-state {
> + pins = "gpio5";
> + function = "normal";
> + power-source = <0>;
> + bias-pull-up;
> + input-enable;
> + };
> +};
> +
> +&pmi632_typec {
> + status = "okay";
> +
> + connector {
> + compatible = "usb-c-connector";
> +
> + power-role = "dual";
> + data-role = "dual";
> + self-powered;
> +
> + typec-power-opmode = "default";
> + pd-disable;
> +
> + vbus-supply = <&pmi632_vbus>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + pmi632_hs_in: endpoint {
> + remote-endpoint = <&usb_dwc3_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + pmi632_ss_in: endpoint {
> + remote-endpoint = <&usb_qmpphy_out>;
> + };
> + };
> + };
> + };
> +};
> +
> +&pmi632_vbus {
> + regulator-min-microamp = <500000>;
> + regulator-max-microamp = <1000000>;
> +
> + status = "okay";
> +};
> +
> +&pon_pwrkey {
> + status = "okay";
> +};
> +
> +&pon_resin {
> + linux,code = <KEY_VOLUMEDOWN>;
> +
> + status = "okay";
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&remoteproc_adsp {
> + status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> + status = "okay";
> +};
> +
> +&remoteproc_mpss {
> + status = "okay";
> +};
> +
> +&rpm_requests {
> + regulators-0 {
> + compatible = "qcom,rpm-pm6125-regulators";
> +
> + pm6125_s6: s6 {
> + regulator-min-microvolt = <304000>;
> + regulator-max-microvolt = <1456000>;
> + };
> +
> + pm6125_s8: s8 {
> + regulator-min-microvolt = <1064000>;
> + regulator-max-microvolt = <1304000>;
> + };
> +
> + pm6125_l1: l1 {
> + regulator-min-microvolt = <952000>;
> + regulator-max-microvolt = <1152000>;
> + };
> +
> + pm6125_l4: l4 {
> + regulator-min-microvolt = <488000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + pm6125_l6: l6 {
> + regulator-min-microvolt = <576000>;
> + regulator-max-microvolt = <656000>;
> + };
> +
> + pm6125_l8: l8 {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <728000>;
> + };
> +
> + pm6125_l9: l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + };
> +
> + pm6125_l10: l10 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <1904000>;
> + };
> +
> + pm6125_l12: l12 {
> + regulator-min-microvolt = <1624000>;
> + regulator-max-microvolt = <1984000>;
> + };
> +
> + pm6125_l13: l13 {
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <1952000>;
> + };
> +
> + pm6125_l14: l14 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <1904000>;
> + };
> +
> + pm6125_l15: l15 {
> + regulator-min-microvolt = <2920000>;
> + regulator-max-microvolt = <3232000>;
> + };
> +
> + pm6125_l16: l16 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <1904000>;
> + };
> +
> + pm6125_l19: l19 {
> + regulator-min-microvolt = <1624000>;
> + regulator-max-microvolt = <3304000>;
> + };
> +
> + pm6125_l20: l20 {
> + regulator-min-microvolt = <1624000>;
> + regulator-max-microvolt = <3304000>;
> + };
> +
> + pm6125_l21: l21 {
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3600000>;
> + };
> +
> + pm6125_l23: l23 {
> + regulator-min-microvolt = <3200000>;
> + regulator-max-microvolt = <3400000>;
> + };
> + };
> +};
> +
> +&sdhc_2 {
> + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-0 = <&sdc2_state_on>, <&sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_state_off>, <&sdc2_cd_off>;
> + pinctrl-names = "default", "sleep";
> +
> + vmmc-supply = <&pm6125_l22>;
> + vqmmc-supply = <&pm6125_l5>;
> +
> + status = "okay";
> +};
> +
> +&sleep_clk {
> + clock-frequency = <32764>;
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <14 4>; /* SE5 SPI (fingerprint), not usable
> from Linux */
> +
> + sdc2_cd_on: sdc2-cd-on-state {
> + pins = "gpio88";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + sdc2_cd_off: sdc2-cd-off-state {
> + pins = "gpio88";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
> +
> +&ufs_mem_hc {
> + vcc-max-microamp = <600000>;
> + vcc-supply = <&pm6125_l24>;
> + vccq2-max-microamp = <600000>;
> + vccq2-supply = <&pm6125_l11>;
> + vdd-hba-supply = <&pm6125_l18>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&pm6125_l4>;
> + vdda-pll-supply = <&pm6125_l12>;
> +
> + status = "okay";
> +};
> +
> +&usb {
> + status = "okay";
> +};
> +
> +&usb_dwc3 {
> + maximum-speed = "high-speed";
> +};
> +
> +&usb_dwc3_hs {
> + remote-endpoint = <&pmi632_hs_in>;
> +};
> +
> +&usb_hsphy {
> + vdd-supply = <&pm6125_l4>;
> + vdda-pll-supply = <&pm6125_l12>;
> + vdda-phy-dpdm-supply = <&pm6125_l15>;
> +
> + status = "okay";
> +};
> +
> +&usb_qmpphy {
> + vdda-phy-supply = <&pm6125_l4>;
> + vdda-pll-supply = <&pm6125_l12>;
> +
> + status = "okay";
> +};
> +
> +&usb_qmpphy_out {
> + remote-endpoint = <&pmi632_ss_in>;
> +};
> +
> +&xo_board {
> + clock-frequency = <19200000>;
> +};
next prev parent reply other threads:[~2026-11-07 17:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 14:14 [PATCH v3 0/3] arm64: dts: qcom: Add Xiaomi Poco M3 (citrus) Amir Hanip
2026-11-07 14:14 ` [PATCH v3 1/3] dt-bindings: arm: qcom: Document Xiaomi Poco M3 Amir Hanip
2026-11-07 14:14 ` [PATCH v3 2/3] arm64: dts: qcom: sm6115-xiaomi-lemon: Split out a common dtsi Amir Hanip
2026-11-07 17:49 ` Barnabás Czémán [this message]
2026-11-07 18:26 ` Barnabás Czémán
2026-11-11 20:03 ` Amir Hanip
2026-11-07 14:14 ` [PATCH v3 3/3] arm64: dts: qcom: Add Xiaomi Poco M3 Amir Hanip
2026-11-07 14:34 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e7a2581e121a9f2addb995ac27ffd322@mainlining.org \
--to=barnabas.czeman@mainlining.org \
--cc=a39skl@gmail.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=killdeath104@gmail.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.