From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Melody Olvera <quic_molvera@quicinc.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
Date: Sat, 15 Oct 2022 09:29:45 -0400 [thread overview]
Message-ID: <e94d9029-e0aa-574f-62d2-632e2c5d70d2@linaro.org> (raw)
In-Reply-To: <20221014221138.7552-4-quic_molvera@quicinc.com>
On 14/10/2022 18:11, Melody Olvera wrote:
> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
> SoCs.
>
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 230 +++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 230 +++++++++++++++++++++++
> 3 files changed, 462 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index d7669a7cee9f..8417295adfeb 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> new file mode 100644
> index 000000000000..47a8eaf4fda2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> @@ -0,0 +1,230 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "qdu1000.dtsi"
> +#include "pm8150.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. QDU1000 IDP";
> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
> +
> + aliases {
> + serial0 = &uart7;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + ppvar_sys: ppvar-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "ppvar_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> +
> + vin-supply = <&ppvar_sys>;
> + };
> +};
> +
> +&apps_rsc {
> + pm8150-regulators {
regulators
> + compatible = "qcom,pm8150-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> +
> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
> + vdd-l2-l10-supply = <&vph_pwr>;
> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
> + vdd-l6-l9-supply = <&vreg_s6a_0p9>;
> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
> + vdd-l13-l16-l17-supply = <&vph_pwr>;
> +
> + vreg_s2a_0p5: smps2 {
> + regulator-name = "vreg_s2a_0p5";
> + regulator-min-microvolt = <320000>;
> + regulator-max-microvolt = <570000>;
> + };
> +
> + vreg_s3a_1p05: smps3 {
> + regulator-name = "vreg_s3a_1p05";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1170000>;
> + };
> +
> + vreg_s4a_1p8: smps4 {
> + regulator-name = "vreg_s4a_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vreg_s5a_2p0: smps5 {
> + regulator-name = "vreg_s5a_2p0";
> + regulator-min-microvolt = <1904000>;
> + regulator-max-microvolt = <2000000>;
> + };
> +
> + vreg_s6a_0p9: smps6 {
> + regulator-name = "vreg_s6a_0p9";
> + regulator-min-microvolt = <920000>;
> + regulator-max-microvolt = <1128000>;
> + };
> +
> + vreg_s7a_1p2: smps7 {
> + regulator-name = "vreg_s7a_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + vreg_s8a_1p3: smps8 {
> + regulator-name = "vreg_s8a_1p3";
> + regulator-min-microvolt = <1352000>;
> + regulator-max-microvolt = <1352000>;
> + };
> +
> + vreg_l1a_0p91: ldo1 {
> + regulator-name = "vreg_l1a_0p91";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l2a_2p3: ldo2 {
> + regulator-name = "vreg_l2a_2p3";
> + regulator-min-microvolt = <2970000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l3a_1p2: ldo3 {
> + regulator-name = "vreg_l3a_1p2";
> + regulator-min-microvolt = <920000>;
> + regulator-max-microvolt = <1260000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l5a_0p8: ldo5 {
> + regulator-name = "vreg_l5a_0p8";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l6a_0p91: ldo6 {
> + regulator-name = "vreg_l6a_0p91";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <950000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l7a_1p8: ldo7 {
> + regulator-name = "vreg_l7a_1p8";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +
> + };
> +
> + vreg_l8a_0p91: ldo8 {
> + regulator-name = "vreg_l8a_0p91";
> + regulator-min-microvolt = <888000>;
> + regulator-max-microvolt = <925000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l9a_0p91: ldo9 {
> + regulator-name = "vreg_l8a_0p91";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l10a_2p95: ldo10 {
> + regulator-name = "vreg_l10a_2p95";
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l11a_0p91: ldo11 {
> + regulator-name = "vreg_l11a_0p91";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l12a_1p8: ldo12 {
> + regulator-name = "vreg_l12a_1p8";
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <1504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l14a_1p8: ldo14 {
> + regulator-name = "vreg_l14a_1p8";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l15a_1p8: ldo15 {
> + regulator-name = "vreg_l15a_1p8";
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l16a_1p8: ldo16 {
> + regulator-name = "vreg_l16a_1p8";
> + regulator-min-microvolt = <1710000>;
> + regulator-max-microvolt = <1890000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l17a_3p3: ldo17 {
> + regulator-name = "vreg_l17a_3p3";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l18a_1p2: ldo18 {
> + regulator-name = "vreg_l18a_1p2";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> + };
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&uart7 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
> new file mode 100644
> index 000000000000..54770c697db8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
> @@ -0,0 +1,230 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "qru1000.dtsi"
> +#include "pm8150.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. QRU1000 IDP";
> + compatible = "qcom,qru1000-idp", "qcom,qru1000";
> +
> + aliases {
> + serial0 = &uart7;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + ppvar_sys: ppvar-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "ppvar_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> +
> + vin-supply = <&ppvar_sys>;
> + };
> +};
> +
> +&apps_rsc {
> + pm8150-regulators {
regulators
Best regards,
Krzysztof
next prev parent reply other threads:[~2022-10-15 13:29 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-14 22:11 [PATCH v2 0/3] Add base device tree files for QDU1000/QRU1000 Melody Olvera
2022-10-14 22:11 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards Melody Olvera
2022-10-15 13:19 ` Krzysztof Kozlowski
2022-10-16 22:58 ` Rob Herring
2022-10-14 22:11 ` [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs Melody Olvera
2022-10-15 13:28 ` Krzysztof Kozlowski
2022-10-19 20:21 ` Melody Olvera
2022-10-20 12:41 ` Krzysztof Kozlowski
2022-10-20 13:54 ` Stephan Gerhold
2022-10-20 16:08 ` Krzysztof Kozlowski
2022-10-20 16:26 ` Krzysztof Kozlowski
2022-10-20 17:18 ` Stephan Gerhold
2022-10-20 17:59 ` Krzysztof Kozlowski
2022-10-20 18:55 ` Melody Olvera
2022-10-15 15:11 ` Krzysztof Kozlowski
2022-10-18 22:15 ` Krzysztof Kozlowski
2022-10-19 18:56 ` Melody Olvera
2022-10-24 0:53 ` Richard Acayan
2022-10-24 17:10 ` Melody Olvera
2022-10-24 22:28 ` Richard Acayan
2022-10-24 22:31 ` Melody Olvera
2022-10-24 22:51 ` Richard Acayan
2022-10-24 22:56 ` Melody Olvera
2022-10-14 22:11 ` [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs Melody Olvera
2022-10-15 13:29 ` Krzysztof Kozlowski [this message]
2022-10-19 21:16 ` Melody Olvera
2022-10-20 12:39 ` Krzysztof Kozlowski
2022-10-18 22:10 ` kernel test robot
2022-10-15 0:04 ` [PATCH v2 0/3] Add base device tree files for QDU1000/QRU1000 Melody Olvera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e94d9029-e0aa-574f-62d2-632e2c5d70d2@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_molvera@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.