[PATCH net-next 2/7] net: phy: smsc: add helper smsc_phy_config_edpd

[Heiner Kallweit <hkallweit1@gmail.com>]

Add helper smsc_phy_config_edpd() and explicitly clear bit
MII_LAN83C185_EDPWRDOWN is edpd_enable isn't set.
Boot loader may have left whatever value.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/smsc.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 928cf6d8b..1b588366e 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -77,6 +77,18 @@ int smsc_phy_config_intr(struct phy_device *phydev)
 }
 EXPORT_SYMBOL_GPL(smsc_phy_config_intr);
 
+static int smsc_phy_config_edpd(struct phy_device *phydev)
+{
+	struct smsc_phy_priv *priv = phydev->priv;
+
+	if (priv->edpd_enable)
+		return phy_set_bits(phydev, MII_LAN83C185_CTRL_STATUS,
+				    MII_LAN83C185_EDPWRDOWN);
+	else
+		return phy_clear_bits(phydev, MII_LAN83C185_CTRL_STATUS,
+				      MII_LAN83C185_EDPWRDOWN);
+}
+
 irqreturn_t smsc_phy_handle_interrupt(struct phy_device *phydev)
 {
 	int irq_status;
@@ -105,9 +117,7 @@ int smsc_phy_config_init(struct phy_device *phydev)
 	if (!priv || !priv->edpd_enable || phydev->irq != PHY_POLL)
 		return 0;
 
-	/* Enable energy detect power down mode */
-	return phy_set_bits(phydev, MII_LAN83C185_CTRL_STATUS,
-			    MII_LAN83C185_EDPWRDOWN);
+	return smsc_phy_config_edpd(phydev);
 }
 EXPORT_SYMBOL_GPL(smsc_phy_config_init);
 
-- 
2.40.0