Re: [PATCH v2] iio: humidity: am2315: add am2320 to i2c_device_id table

[David Lechner <dlechner@baylibre.com>]

On 8/10/26 1:32 PM, Nicolás Antinori wrote:
> The AM2320 is fully compatible with the AM2315 sensor in terms of I2C
> communication protocol and measurement conversions.
> 
> Add the "am2320" entry to the i2c_device_id table.

Interesting. No devicetree bindings for this one? What kind of
system is it on?

> 
> Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
> ---
> v2:
> - Adapted KConfig text using the suggestions from v1 by Nuno Sá and Andy
>   Shevchenko
> 
> v1: https://lore.kernel.org/all/20260805183733.1000550-1-nico.antinori.7@gmail.com/T/#u
> 
>  drivers/iio/humidity/Kconfig  | 8 +++++---
>  drivers/iio/humidity/am2315.c | 3 ++-
>  2 files changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
> index 54f11f000b6f..10598a0b15bc 100644
> --- a/drivers/iio/humidity/Kconfig
> +++ b/drivers/iio/humidity/Kconfig
> @@ -5,13 +5,15 @@
>  menu "Humidity sensors"
> 
>  config AM2315
> -	tristate "Aosong AM2315 relative humidity and temperature sensor"
> +	tristate "Aosong AM2315 and similar relative humidity and temperature sensor"
>  	depends on I2C
>  	select IIO_BUFFER
>  	select IIO_TRIGGERED_BUFFER
>  	help
> -	  If you say yes here you get support for the Aosong AM2315
> -	  relative humidity and ambient temperature sensor.
> +	  If you say yes here you get support for the Aosong relative
> +	  humidity and ambient temperature sensors:
> +	  - AM2315
> +	  - AM2320
> 
>  	  This driver can also be built as a module. If so, the module will
>  	  be called am2315.
> diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c
> index f29baa251f9f..5bce5eec45cc 100644
> --- a/drivers/iio/humidity/am2315.c
> +++ b/drivers/iio/humidity/am2315.c
> @@ -1,6 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
> - * Aosong AM2315 relative humidity and temperature
> + * Aosong AM2315 and similar relative humidity and temperature
>   *
>   * Copyright (c) 2016, Intel Corporation.
>   *
> @@ -251,6 +251,7 @@ static int am2315_probe(struct i2c_client *client)
> 
>  static const struct i2c_device_id am2315_i2c_id[] = {
>  	{ .name = "am2315" },
> +	{ .name = "am2320" },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(i2c, am2315_i2c_id);
> --
> 2.47.3
> 

Currently, the driver sets `indio_dev->name = AM2315_DRIVER_NAME;`
Usually, when there is more than one chip supported in a driver, we
want this to be the the name of the actual chip.

(And we usually try to avoid DRIVER_NAME macros so removing that
would be a welcome change.)