From: Lance Yang <lance.yang@linux.dev>
To: Wei Yang <richard.weiyang@gmail.com>
Cc: akpm@linux-foundation.org, david@redhat.com,
lorenzo.stoakes@oracle.com, ziy@nvidia.com,
baolin.wang@linux.alibaba.com, Liam.Howlett@oracle.com,
npache@redhat.com, ryan.roberts@arm.com, dev.jain@arm.com,
baohua@kernel.org, ioworker0@gmail.com,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: [PATCH mm-new v3 3/3] mm/khugepaged: merge PTE scanning logic into a new helper
Date: Fri, 10 Oct 2025 21:55:42 +0800 [thread overview]
Message-ID: <ed89aa31-a70a-4ad4-aa20-2e130b1e9975@linux.dev> (raw)
In-Reply-To: <20251010132950.yx6bmvub3a46gcl3@master>
On 2025/10/10 21:29, Wei Yang wrote:
> On Wed, Oct 08, 2025 at 12:37:48PM +0800, Lance Yang wrote:
>> From: Lance Yang <lance.yang@linux.dev>
>>
>> As David suggested, the PTE scanning logic in hpage_collapse_scan_pmd()
>> and __collapse_huge_page_isolate() was almost duplicated.
>>
>> This patch cleans things up by moving all the common PTE checking logic
>> into a new shared helper, thp_collapse_check_pte(). While at it, we use
>> vm_normal_folio() instead of vm_normal_page().
>>
>> Suggested-by: David Hildenbrand <david@redhat.com>
>> Suggested-by: Dev Jain <dev.jain@arm.com>
>> Signed-off-by: Lance Yang <lance.yang@linux.dev>
>> ---
>> mm/khugepaged.c | 243 ++++++++++++++++++++++++++----------------------
>> 1 file changed, 130 insertions(+), 113 deletions(-)
>>
>> diff --git a/mm/khugepaged.c b/mm/khugepaged.c
>> index b5c0295c3414..7116caae1fa4 100644
>> --- a/mm/khugepaged.c
>> +++ b/mm/khugepaged.c
>> @@ -61,6 +61,12 @@ enum scan_result {
>> SCAN_PAGE_FILLED,
>> };
>>
>> +enum pte_check_result {
>> + PTE_CHECK_SUCCEED,
>> + PTE_CHECK_CONTINUE,
>> + PTE_CHECK_FAIL,
>> +};
>> +
>> #define CREATE_TRACE_POINTS
>> #include <trace/events/huge_memory.h>
>>
>> @@ -533,62 +539,139 @@ static void release_pte_pages(pte_t *pte, pte_t *_pte,
>> }
>> }
>>
>> +/*
>> + * thp_collapse_check_pte - Check if a PTE is suitable for THP collapse
>> + * @pte: The PTE to check
>> + * @vma: The VMA the PTE belongs to
>> + * @addr: The virtual address corresponding to this PTE
>> + * @foliop: On success, used to return a pointer to the folio
>> + * Must be non-NULL
>> + * @none_or_zero: Counter for none/zero PTEs. Must be non-NULL
>> + * @unmapped: Counter for swap PTEs. Can be NULL if not scanning swaps
>> + * @shared: Counter for shared pages. Must be non-NULL
>> + * @scan_result: Used to return the failure reason (SCAN_*) on a
>> + * PTE_CHECK_FAIL return. Must be non-NULL
>> + * @cc: Collapse control settings
>> + *
>> + * Returns:
>> + * PTE_CHECK_SUCCEED - PTE is suitable, proceed with further checks
>> + * PTE_CHECK_CONTINUE - Skip this PTE and continue scanning
>> + * PTE_CHECK_FAIL - Abort collapse scan
>> + */
>> +static inline int thp_collapse_check_pte(pte_t pte, struct vm_area_struct *vma,
>> + unsigned long addr, struct folio **foliop, int *none_or_zero,
>> + int *unmapped, int *shared, int *scan_result,
>> + struct collapse_control *cc)
>> +{
>> + struct folio *folio = NULL;
>> +
>> + if (pte_none(pte) || is_zero_pfn(pte_pfn(pte))) {
>> + (*none_or_zero)++;
>> + if (!userfaultfd_armed(vma) &&
>> + (!cc->is_khugepaged ||
>> + *none_or_zero <= khugepaged_max_ptes_none)) {
>> + return PTE_CHECK_CONTINUE;
>> + } else {
>> + *scan_result = SCAN_EXCEED_NONE_PTE;
>> + count_vm_event(THP_SCAN_EXCEED_NONE_PTE);
>> + return PTE_CHECK_FAIL;
>> + }
>> + } else if (!pte_present(pte)) {
>> + if (!unmapped) {
>> + *scan_result = SCAN_PTE_NON_PRESENT;
>> + return PTE_CHECK_FAIL;
>> + }
>> +
>> + if (non_swap_entry(pte_to_swp_entry(pte))) {
>> + *scan_result = SCAN_PTE_NON_PRESENT;
>> + return PTE_CHECK_FAIL;
>> + }
>> +
>> + (*unmapped)++;
>> + if (!cc->is_khugepaged ||
>> + *unmapped <= khugepaged_max_ptes_swap) {
>> + /*
>> + * Always be strict with uffd-wp enabled swap
>> + * entries. Please see comment below for
>> + * pte_uffd_wp().
>> + */
>> + if (pte_swp_uffd_wp(pte)) {
>> + *scan_result = SCAN_PTE_UFFD_WP;
>> + return PTE_CHECK_FAIL;
>> + }
>> + return PTE_CHECK_CONTINUE;
>> + } else {
>> + *scan_result = SCAN_EXCEED_SWAP_PTE;
>> + count_vm_event(THP_SCAN_EXCEED_SWAP_PTE);
>> + return PTE_CHECK_FAIL;
>> + }
>> + } else if (pte_uffd_wp(pte)) {
>> + /*
>> + * Don't collapse the page if any of the small PTEs are
>> + * armed with uffd write protection. Here we can also mark
>> + * the new huge pmd as write protected if any of the small
>> + * ones is marked but that could bring unknown userfault
>> + * messages that falls outside of the registered range.
>> + * So, just be simple.
>> + */
>> + *scan_result = SCAN_PTE_UFFD_WP;
>> + return PTE_CHECK_FAIL;
>> + }
>> +
>> + folio = vm_normal_folio(vma, addr, pte);
>> + if (unlikely(!folio) || unlikely(folio_is_zone_device(folio))) {
>> + *scan_result = SCAN_PAGE_NULL;
>> + return PTE_CHECK_FAIL;
>> + }
>> +
>> + if (!folio_test_anon(folio)) {
>> + VM_WARN_ON_FOLIO(true, folio);
>> + *scan_result = SCAN_PAGE_ANON;
>> + return PTE_CHECK_FAIL;
>> + }
>> +
>> + /*
>> + * We treat a single page as shared if any part of the THP
>> + * is shared.
>> + */
>> + if (folio_maybe_mapped_shared(folio)) {
>> + (*shared)++;
>> + if (cc->is_khugepaged && *shared > khugepaged_max_ptes_shared) {
>> + *scan_result = SCAN_EXCEED_SHARED_PTE;
>> + count_vm_event(THP_SCAN_EXCEED_SHARED_PTE);
>> + return PTE_CHECK_FAIL;
>> + }
>> + }
>> +
>> + *foliop = folio;
>> +
>> + return PTE_CHECK_SUCCEED;
>> +}
>> +
>
> This one looks much better.
>
> While my personal feeling is this is not a complete work to merge the scanning
> logic. We still have folio_expected_ref_count() and pte_young() check present
> both in __collapse_huge_page_isolate() and huge_collapse_scan_pmd().
Yep, good catch!
There's definitely more that can be done. For now, let's keep this patch
as-is to avoid making it too complex. Let's get this one in first, and
then we can work on the next step :)
next prev parent reply other threads:[~2025-10-10 13:55 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-08 4:37 [PATCH mm-new v3 0/3] refactor and merge PTE scanning logic Lance Yang
2025-10-08 4:37 ` [PATCH mm-new v3 1/3] mm/khugepaged: optimize PTE scanning with if-else-if-else-if chain Lance Yang
2025-10-14 12:17 ` Lorenzo Stoakes
2025-10-14 12:27 ` David Hildenbrand
2025-10-15 4:49 ` Lance Yang
2025-10-15 9:16 ` Lorenzo Stoakes
2025-10-15 9:31 ` Lance Yang
2025-10-08 4:37 ` [PATCH mm-new v3 2/3] mm/khugepaged: use VM_WARN_ON_FOLIO instead of VM_BUG_ON_FOLIO for non-anon folios Lance Yang
2025-10-14 12:25 ` Lorenzo Stoakes
2025-10-08 4:37 ` [PATCH mm-new v3 3/3] mm/khugepaged: merge PTE scanning logic into a new helper Lance Yang
2025-10-09 1:07 ` Andrew Morton
2025-10-09 1:49 ` Lance Yang
2025-10-10 9:10 ` Dev Jain
2025-10-10 10:42 ` Lance Yang
2025-10-10 13:29 ` Wei Yang
2025-10-10 13:55 ` Lance Yang [this message]
2025-10-14 12:36 ` Lorenzo Stoakes
2025-10-14 17:41 ` Lorenzo Stoakes
2025-10-15 1:48 ` Lance Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ed89aa31-a70a-4ad4-aa20-2e130b1e9975@linux.dev \
--to=lance.yang@linux.dev \
--cc=Liam.Howlett@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=david@redhat.com \
--cc=dev.jain@arm.com \
--cc=ioworker0@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lorenzo.stoakes@oracle.com \
--cc=npache@redhat.com \
--cc=richard.weiyang@gmail.com \
--cc=ryan.roberts@arm.com \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.