All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nikita Travkin <nikita@trvn.ru>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: cros-qcom-dts-watchers@chromium.org,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/3] arm64: dts: qcom: acer-aspire1: Correct audio codec definition
Date: Tue, 31 Oct 2023 12:20:49 +0500	[thread overview]
Message-ID: <eda1c91bd2dce76e633dd82ad3105355@trvn.ru> (raw)
In-Reply-To: <3a423cb7-cdf1-433a-a848-8636917640bb@linaro.org>

Konrad Dybcio писал(а) 31.10.2023 02:48:
> On 27.10.2023 16:42, Nikita Travkin wrote:
>> When initially added, a mistake was made in the definition of the codec.
>>
>> Despite the fact that the DMIC line is connected on the side of the
>> codec chip, and relevant passive components, including 0-ohm resistors
>> connecting the dmics, are present, the dmic line is still cut in
>> another place on the board, which was overlooked.
>>
>> Correct this by replacing the dmic configuration with a comment
>> describing this hardware detail.
>>
>> While at it, also add missing regulators definitions. This is not a
>> functional change as all the relevant regulators were already added via
>> the other rail supplies.
>>
>> Fixes: 4a9f8f8f2ada ("arm64: dts: qcom: Add Acer Aspire 1")
>> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
>> ---
>>  arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts | 17 +++++++++++++++--
>>  1 file changed, 15 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
>> index cfde8cd47107..00b442696618 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
>> +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
>> @@ -209,9 +209,22 @@ alc5682: codec@1a {
>>  		AVDD-supply = <&vreg_l15a_1p8>;
>>  		MICVDD-supply = <&reg_codec_3p3>;
>>  		VBAT-supply = <&reg_codec_3p3>;
>> +		DBVDD-supply = <&vreg_l15a_1p8>;
>> +		LDO1-IN-supply = <&vreg_l15a_1p8>;
>> +
>> +		/*
>> +		 * NOTE: The board has a path from this codec to the
>> +		 * DMIC microphones in the lid, however some of the option
>> +		 * resistors are absent and the microphones are connected
>> +		 * to the SoC instead.
> Would that not also require more DT changes and maybe UCM?

I don't think I had any other descriptions to support the dmic in
the initial set (first audio support for this board is 3/3 here)
and there is no upstream UCM yet - I will probably hold it off until
I get vamacro and dmic on it working.

Nikita

> 
> Konrad

  reply	other threads:[~2023-10-31  7:21 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-27 14:42 [PATCH 0/3] sc7180-acer-aspire1: Add sound Nikita Travkin
2023-10-27 14:42 ` [PATCH 1/3] arm64: dts: qcom: acer-aspire1: Enable RTC Nikita Travkin
2023-10-30 21:47   ` Konrad Dybcio
2023-10-30 21:55     ` Doug Anderson
2023-10-31  7:18       ` Nikita Travkin
2023-10-27 14:42 ` [PATCH 2/3] arm64: dts: qcom: acer-aspire1: Correct audio codec definition Nikita Travkin
2023-10-30 21:48   ` Konrad Dybcio
2023-10-31  7:20     ` Nikita Travkin [this message]
2023-10-31 10:06       ` Konrad Dybcio
2023-10-31 10:48         ` Nikita Travkin
2023-10-31 10:58           ` Konrad Dybcio
2023-10-27 14:42 ` [PATCH 3/3] arm64: dts: qcom: acer-aspire1: Add sound Nikita Travkin
2023-10-30 21:50   ` Konrad Dybcio
2023-10-30 21:51     ` Konrad Dybcio
2023-10-31  7:26       ` Nikita Travkin
2023-10-31 10:07         ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=eda1c91bd2dce76e633dd82ad3105355@trvn.ru \
    --to=nikita@trvn.ru \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=cros-qcom-dts-watchers@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.