From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Jaime_Pe=F1alba?= Subject: Re: More Pentium III (Coppermine) problems Date: Fri, 1 Jul 2005 00:39:19 +0200 Message-ID: References: <20050630222500.GA8564@isilmar.linta.de> Reply-To: =?ISO-8859-1?Q?Jaime_Pe=F1alba?= Mime-Version: 1.0 Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <20050630222500.GA8564@isilmar.linta.de> Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=m.gmane.org@lists.linux.org.uk Content-Type: text/plain; charset="us-ascii" To: cpufreq@lists.linux.org.uk, linux@dominikbrodowski.net also doesnt work ;( speedstep-lib: x86: 6, model: 8 speedstep-lib: Coppermine: MSR_IA32_EBL_CR_POWERON is 0x44080020, 0x0 speedstep-lib: Coppermine: MSR_IA32_PLATFORM ID is 0x0, 0x2560000 speedstep-smi: signature:0x00008680, command:0x0000e6f5, event:0x00000000, perf_level:0x47534943. speedstep-smi: trying to obtain ownership with command 47534982 at port b2 speedstep-smi: result is 0 speedstep-smi: bug #1422 -- can't read freqs from BIOS speedstep-smi: could not detect low and high frequencies by SMI call. speedstep-lib: trying to determine both speeds speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x44080020 0x0 speedstep-lib: speed is 500000 speedstep-lib: previous seped is 500000 speedstep-smi: trying to set frequency to state 1 with command 47534982 at port b2 speedstep-smi: retry 1, previous result 0, waiting... speedstep-smi: retry 2, previous result 0, waiting... speedstep-smi: retry 3, previous result 0, waiting... speedstep-smi: retry 4, previous result 0, waiting... speedstep-smi: retry 5, previous result 0, waiting... cpufreq: change failed with new_state 2 and result 0 speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x44080020 0x0 speedstep-lib: speed is 500000 speedstep-lib: low seped is 500000 speedstep-smi: trying to set frequency to state 0 with command 47534982 at port b2 speedstep-smi: retry 1, previous result 0, waiting... speedstep-smi: retry 2, previous result 0, waiting... speedstep-smi: retry 3, previous result 0, waiting... speedstep-smi: retry 4, previous result 0, waiting... speedstep-smi: retry 5, previous result 0, waiting... cpufreq: change failed with new_state 2 and result 0 speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x44080020 0x0 speedstep-lib: speed is 500000 speedstep-lib: high seped is 500000 speedstep-smi: could not detect two different speeds -- aborting. Any more sugestions? Thanks, Jaime. 2005/7/1, Dominik Brodowski : > Hi, >=20 > please try out >=20 > modprobe speedstep-smi smi_cmd=3D0x82 smi_port=3D0xb2 smi_sig=3D1 >=20 >=20 > Dominik >