From: "Jiang, JunyuX" <junyux.jiang@intel.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Yang, Qiming" <qiming.yang@intel.com>, "Su, Simei" <simei.su@intel.com>
Subject: Re: [dpdk-dev] [PATCH v2] net/ice: support based RSS configure
Date: Tue, 23 Jun 2020 02:47:08 +0000 [thread overview]
Message-ID: <ee0db7fc8c014a06a312fc5ba6f675ca@intel.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E7061154842F8A@SHSMSX103.ccr.corp.intel.com>
Hi qi,
> -----Original Message-----
> From: Zhang, Qi Z <qi.z.zhang@intel.com>
> Sent: Monday, June 22, 2020 10:37 PM
> To: Jiang, JunyuX <junyux.jiang@intel.com>; dev@dpdk.org
> Cc: Yang, Qiming <qiming.yang@intel.com>; Su, Simei <simei.su@intel.com>
> Subject: RE: [PATCH v2] net/ice: support based RSS configure
>
>
>
> > -----Original Message-----
> > From: Jiang, JunyuX <junyux.jiang@intel.com>
> > Sent: Monday, June 22, 2020 1:33 PM
> > To: dev@dpdk.org
> > Cc: Yang, Qiming <qiming.yang@intel.com>; Zhang, Qi Z
> > <qi.z.zhang@intel.com>; Su, Simei <simei.su@intel.com>; Jiang, JunyuX
> > <junyux.jiang@intel.com>
> > Subject: [PATCH v2] net/ice: support based RSS configure
> The title is misleading, how about "initialize and update RSS based on user
> request"
>
> >
> > Enable/disable RSS for corresponding flow base on the user's
> > requirement
>
> Initialize and update RSS configure based on user request (rte_eth_rss_conf)
> from dev_configure and .rss_hash_update ops.
> All previous default configure has been removed.
> .
Got it, it looks better.
> >
> > Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
> >
> > ---
> > v1->v2:
> > remove gtpu and pppoe/pppod configuration from rss init
> > ---
> > drivers/net/ice/ice_ethdev.c | 162
> > +++++++++++++++++++++--------------
> > 1 file changed, 96 insertions(+), 66 deletions(-)
> >
> > diff --git a/drivers/net/ice/ice_ethdev.c
> > b/drivers/net/ice/ice_ethdev.c index 5a89a1955..cbe59a40e 100644
> > --- a/drivers/net/ice/ice_ethdev.c
> > +++ b/drivers/net/ice/ice_ethdev.c
> > @@ -2441,6 +2441,87 @@ ice_dev_uninit(struct rte_eth_dev *dev)
> > return 0;
> > }
> >
> > +static void
> > +ice_rss_hash_set(struct ice_pf *pf, uint64_t rss_hf) {
> > + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> > + struct ice_vsi *vsi = pf->main_vsi;
> > + int ret;
> > +
> > + /**
> > + * configure RSS for IPv4 with input set IPv4 src/dst
> > + * configure RSS for IPv6 with input set IPv6 src/dst
>
> The comment looks redundant, please merge into one line.
> /* Configure RSS for IP with src/dst address as input set */
>
Got it.
> > + */
> > + if (rss_hf & ETH_RSS_IP) {
>
> This is not correct, it is possible user only want IPv4 but not IPv6.
>
> For ice, I think we can do like below
>
> If (rss_hf & ETH_RSS_IPV4) {
> Ice_add_rss_cfg (... ICE_FLOW_HASH_IPV4 ...) } If (rss_hf &
> ETH_RSS_IPV6) {
> Ice_add_rss_cfg (... ICE_FLOW_HASH_IPv6 ...) } We can just ignore
> ETH_RSS_FRAG_IPV4 and ETH_RSS_NONFRAG_IPV4_OTHER and same for
> UDP/TCP and SCTP.
>
>
> > + ret = ice_add_rss_cfg(hw, vsi->idx, ICE_FLOW_HASH_IPV4,
> > + ICE_FLOW_SEG_HDR_IPV4, 0);
>
> You need ICE_FLOW_SEG_HDR_IPV_OTHER, see patch
> http://patchwork.dpdk.org/patch/71584/
>
Got it, same for UDP/TCP and SCTP.
>
[...]
> > /* set hash key */
> > @@ -3687,7 +3706,18 @@ ice_rss_hash_update(struct rte_eth_dev *dev,
> > if (status)
> > return status;
> >
> > - /* TODO: hash enable config, ice_add_rss_cfg */
> > + if (rss_conf->rss_hf == 0)
> > + return -EINVAL;
> > +
> > + status = ice_rem_vsi_rss_cfg(hw, vsi->idx);
> > + if (status != ICE_SUCCESS) {
> > + PMD_DRV_LOG(ERR, "Failed to remove rss cfg!");
> > + return status;
> > + }
>
> No need to remove exist configure,
> we just need to make sure all the configure from rss_hf has been applied.
Got it.
>
> > +
> > + /* RSS hash configuration */
> > + ice_rss_hash_set(pf, rss_conf->rss_hf);
> > +
> > return 0;
> > }
> >
> > --
> > 2.17.1
next prev parent reply other threads:[~2020-06-23 2:47 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-10 6:33 [dpdk-dev] [PATCH] net/ice: support based RSS configure Junyu Jiang
2020-06-22 5:33 ` [dpdk-dev] [PATCH v2] " Junyu Jiang
2020-06-22 14:36 ` Zhang, Qi Z
2020-06-23 2:47 ` Jiang, JunyuX [this message]
2020-07-03 8:16 ` Zhao1, Wei
2020-07-03 8:46 ` Zhao1, Wei
2020-06-23 8:33 ` [dpdk-dev] [PATCH v3] net/ice: initialize and update RSS based on user request Junyu Jiang
2020-06-23 9:40 ` Zhang, Qi Z
2020-06-24 2:09 ` [dpdk-dev] [PATCH v4] " Junyu Jiang
2020-06-24 7:30 ` Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ee0db7fc8c014a06a312fc5ba6f675ca@intel.com \
--to=junyux.jiang@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
--cc=qiming.yang@intel.com \
--cc=simei.su@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.