All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sadasivan Shaiju <sshaiju@mvista.com>
To: David Daney <ddaney@caviumnetworks.com>
Cc: linux-kernel@vger.kernel.org, ralf@linux-mips.org,
	david.daney@cavium.com, shaiju_sada@yahoo.com
Subject: RE: [PATCH] delaying interrupts in mips [ 2.6.32]
Date: Mon, 11 Aug 2014 15:33:17 -0700	[thread overview]
Message-ID: <eedac437fcb12ece914ccb716c3d4cb9@mail.gmail.com> (raw)
In-Reply-To: <53E94382.1010203@caviumnetworks.com>

Hi David,

Sorry  ,  I  didn't  check  that  .  I  am late  in submitting  it .

Regards,
Shaiju.

-----Original Message-----
From: David Daney [mailto:ddaney@caviumnetworks.com]
Sent: Monday, August 11, 2014 3:28 PM
To: Sadasivan Shaiju
Cc: linux-kernel@vger.kernel.org; ralf@linux-mips.org;
david.daney@cavium.com; shaiju_sada@yahoo.com
Subject: Re: [PATCH] delaying interrupts in mips [ 2.6.32]

On 08/11/2014 03:13 PM, Sadasivan Shaiju wrote:
> Hi ,
>
> I  work for Montavista (Cavium Inc) as  a  Technical  Lead .  I want
> to push some  of the kernel  patches to  rt community (2.6.32 kernel
> 2.6.33 rt patch)  , so  that  It  will  go  to  the  main line These
> patches  are reviewed  and approved  by  our system Architect.  I
> request  you to include  in the main line .

It is already in the "main line":

commit 1bcfecc028686ea32e49b0f4f6e8a665917cb49a
Author: Yong Zhang <yong.zhang@windriver.com>
Date:   Thu Jul 19 09:13:53 2012 +0200

     MIPS: Octeon: delay enable irq to ->smp_finish()

     To prepare for smoothing set_cpu_[active|online]() mess up

     Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
     Cc: Sergei Shtylyov <sshtylyov@mvista.com>
     Cc: David Daney <david.daney@cavium.com>
     Acked-by: David Daney <david.daney@cavium.com>
     Patchwork: https://patchwork.linux-mips.org/patch/3845/
     Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Why are you sending it again?

David Daney



   These  issues  were  reported  by our
> customer CISCO .
>
> Problem Description:
> When CONFIG_DEBUG_PREEMPT is enabled the following stack trace occurs.
>
> [ 170.814470] BUG: using smp_processor_id() in preemptible [00000000]
> code: sirq-timer/4/62
> [ 170.814482] caller is hrtimer_run_pending+0x10/0x20 [ 170.814488]
> Call Trace:
> [ 170.814496] [<ffffffff8010d844>] dump_stack+0x8/0x34 [ 170.814507]
> [<ffffffff803c2598>] debug_smp_processor_id+0xe0/0xf0 [ 170.814517]
> [<ffffffff80254158>] hrtimer_run_pending+0x10/0x20 [ 170.814528]
> [<ffffffff80242400>] run_timer_softirq+0x60/0x348 [ 170.814539]
> [<ffffffff8023ae80>] run_ksoftirqd+0x1c8/0x348 [ 170.814550]
> [<ffffffff802503f8>] kthread+0x88/0x90 [ 170.814561]
> [<ffffffff80206c80>] kernel_thread_helper+0x10/0x18
>
> Root Cause:
> Interrupt was occurring before the processor was completely up, and
> the softirq threads were unable to schedule on the processor and then
> ran on the wrong CPU.
>
> How Solved:
> Enabling of interrupt has been delayed till smp_finish so that
> kthread_bind can safely bind threads to any possible CPU.
>
> I request you  to merge  the above patch  to the  main line .  If  any
> questions please contact me atsshaiju@mvista.com
> (shaiju_sada@yahoo.com)
>
> Regards,
> Shaiju.
>
>
> 0001-Interrupt-delaying-enabling-of-interrupt.patch
>
>
>  From 58512475cba93003c23f2b380b573e64eebcabd5 Mon Sep 17 00:00:00
> 2001
> From: Sadasivan Shaiju<sshaiju@mvista.com>
> Date: Mon, 20 Feb 2012 13:25:50 -0800
> Subject: [PATCH] Interrupt : delaying enabling of interrupt
>
> Source: MontaVista Software, LLC
> MR: 47157
> Type: Defect Fix
> Disposition: Local
> ChangeID: 48c837329556b161f3111e6fded1c9857fa3a149
> Description:
>
> This patch is to delay the enabling of interrupt till smp_finish . So
> that kthread_bind can safely bind threads to any possible cpu. Without
> this change interrupt should occur beofre  the  processor was
> completely up, and  the softirq threads were unable to schedule on the
> processor and  then  ran on the wrong CPU.
>
> Signed-off-by: Sadasivan Shaiju<sshaiju@mvista.com>
> ---
>   arch/mips/cavium-octeon/smp.c |    3 ++-
>   1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/arch/mips/cavium-octeon/smp.c
> b/arch/mips/cavium-octeon/smp.c index ff21542..c7de7ac 100644
> --- a/arch/mips/cavium-octeon/smp.c
> +++ b/arch/mips/cavium-octeon/smp.c
> @@ -308,7 +308,6 @@ static void octeon_init_secondary(void)
>   	octeon_init_cvmcount();
>
>   	octeon_irq_setup_secondary();
> -	raw_local_irq_enable();
>   }
>
>   /**
> @@ -365,6 +364,8 @@ static void octeon_smp_finish(void)
>
>   	/* to generate the first CPU timer interrupt */
>   	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
> +	/* enable local interrupts */
> +	raw_local_irq_enable();
>   }
>
>   /**
> -- 1.7.0.1

  reply	other threads:[~2014-08-11 22:33 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-11 22:13 [PATCH] delaying interrupts in mips [ 2.6.32] Sadasivan Shaiju
2014-08-11 22:28 ` David Daney
2014-08-11 22:33   ` Sadasivan Shaiju [this message]
2014-08-11 22:35     ` David Daney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=eedac437fcb12ece914ccb716c3d4cb9@mail.gmail.com \
    --to=sshaiju@mvista.com \
    --cc=david.daney@cavium.com \
    --cc=ddaney@caviumnetworks.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=shaiju_sada@yahoo.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.