From: M Josenhans <m_josenhans@web.de>
To: bluez-devel@lists.sourceforge.net
Subject: [Bluez-devel] Browsing Anycom GP-600 GPS Receiver fails
Date: Mon, 18 Sep 2006 23:28:54 +0200 [thread overview]
Message-ID: <een2ub$f0l$1@sea.gmane.org> (raw)
Hello bluez,
I own an Anycom GP-600 GPS Receiver. This receiver might have a broken
SDP stack. I use SuSE Linux 9.3.
When browsing the device using the sdptool browse command, it fails.
However when using Konqueror to browse the SDP-record on the same
distribution it works fine.
The difference between kde and sdptool browse seems to be, that kde uses
a 32 bit UUID, while the sdptool uses a 16 bit UUID.
Is there any chance that bluez could handle such trouble more gracefully
and issue a waring? I remember prior Bluez versions had been working
slightly better.
Below you find the dumps for browsing with KDE and sdptool.
Br,
Michael
Browsing with KDE seems to use 32Bit UUID:
------------------------------------------
HCI sniffer - Bluetooth packet analyzer ver 1.18
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Inquiry (0x01|0x0001) plen 5
lap 0x9e8b33 len 6 num 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:12:EE:9C:D4:CD clkoffset 0x4af5 class 0x520204
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:0E:07:8D:EC:65 clkoffset 0x024d class 0x520204
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:02:78:02:BF:8C ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:02:78:02:BF:8C
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:02:78:02:BF:8C
Link key: 8495e337c0ed515f4925967cead95d83
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:02:78:02:BF:8C
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 43 bdaddr 00:02:78:02:BF:8C type ACL encrypt 0x01
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 43 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 43
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0051 scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0051 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0051 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 48
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0051 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 26
L2CAP(d): cid 0x0051 len 22 [psm 1]
SDP SSA Req: tid 0x0 len 0x11
pat uuid-32 0x1002 (PubBrwsGrp)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0051 scid 0x0040
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0051 scid 0x0040
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0052 scid 0x0041 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0052 scid 0x0041 result 0 status 0
Connection successful
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0052 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 48
< ACL data: handle 43 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0052 flags 0x00 result 0 clen 0
Success
< ACL data: handle 43 flags 0x02 dlen 26
L2CAP(d): cid 0x0052 len 22 [psm 1]
SDP SSA Req: tid 0x0 len 0x11
pat uuid-32 0x0100 (L2CAP)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 17
> ACL data: handle 43 flags 0x01 dlen 1
L2CAP(d): cid 0x0041 len 48 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x2b
count 38
cont 02 00 0F
< ACL data: handle 43 flags 0x02 dlen 28
L2CAP(d): cid 0x0052 len 24 [psm 1]
SDP SSA Req: tid 0x1 len 0x13
pat uuid-32 0x0100 (L2CAP)
max 65535
aid(s) 0x0000 - 0xffff
cont 02 00 0F
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> ACL data: handle 43 flags 0x02 dlen 17
> ACL data: handle 43 flags 0x01 dlen 10
L2CAP(d): cid 0x0041 len 23 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x12
count 15
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10000
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1101 (SP) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
aid 0x0100 (SrvName)
str "SPP slave"
cont 00
< ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0052 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 43
> ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0052 scid 0x0041
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 43 reason 0x13
Reason: Remote User Teminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 43 reason 0x16
Reason: Connection Terminated by Local Host
Browsing with sdptool command seems to use 16 Bit UUIDs:
--------------------------------------------------------
sdptool browse <bdaddr>;
HCI sniffer - Bluetooth packet analyzer ver 1.18
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:02:78:02:BF:8C ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:02:78:02:BF:8C
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:02:78:02:BF:8C
Link key: 8495e337c0ed515f4925967cead95d83
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:02:78:02:BF:8C
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 00:02:78:02:BF:8C type ACL encrypt 0x01
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 42 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 42
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> HCI Event: Max Slots Change (0x1b) plen 3
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0050 scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0050 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0050 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 48
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0050 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 24
L2CAP(d): cid 0x0050 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x1002 (PubBrwsGrp)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x5
count 2
cont 00
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0050 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0050 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 42 reason 0x13
Reason: Remote User Teminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 42 reason 0x16
Reason: Connection Terminated by Local Host
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next reply other threads:[~2006-09-18 21:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-18 21:28 M Josenhans [this message]
2006-09-21 16:07 ` [Bluez-devel] Browsing Anycom GP-600 GPS Receiver fails Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='een2ub$f0l$1@sea.gmane.org' \
--to=m_josenhans@web.de \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.