From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthias Brugger Date: Tue, 12 May 2020 13:15:58 +0200 Subject: raspberrypi cm3 v2019.07 not working In-Reply-To: References: <3c0fa434-a780-cd8c-510f-df271b447f29@suse.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 12/05/2020 13:00, Belisko Marek wrote: > On Tue, May 12, 2020 at 12:51 PM Matthias Brugger wrote: >> >> >> >> On 12/05/2020 11:15, Belisko Marek wrote: >>> On Fri, May 8, 2020 at 11:39 PM Belisko Marek wrote: >>>> >>>> Hi Matthias, >>>> >>>> On Fri, May 8, 2020 at 11:28 PM Matthias Brugger wrote: >>>>> >>>>> Hi Marek, >>>>> >>>>> On 08/05/2020 21:52, Belisko Marek wrote: >>>>>> On Wed, May 6, 2020 at 11:02 PM Belisko Marek wrote: >>>>>>> >>>>>>> On Tue, May 5, 2020 at 10:18 PM Belisko Marek wrote: >>>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> I'm trying to run 2019.07 u-boot on raspberrypi cm3 module but I got >>>>>>>> no feedback on console. When used 2018.01 it boots fine. Probably I >>>>>>>> need to do git bisect but maybe someone have some idea or experience >>>>>>>> what can cause that. Thanks. >>>>>>> I give a try 2020.01 and I got only this: >>>>>>> U-Boot 2020.01 (May 06 2020 - 20:09:45 +0000) >>>>>>> >>>>>>> DRAM: 948 MiB >>>>>>> RPI Compute Module 3 (0xa020a0) >>>>>>> >>>>>>> I'll try to debug it and let you know. >>>>>> Debug messages shows this: >>>>>> https://pastebin.com/2SwNzrb1 >>>>>> >>>>>> I tried to debug but I have no clue what is going one there. >>>>>> >>>>>> Also u-boot 2019.07 is not working at all on cm3 due to this commit >>>>>> (after bisect when reverted u-boot start working again): >>>>>> 143256b353c4d2ad1cf5e5e63b38410188b35e49 - fdt: update bcm283x device >>>>>> tree sources to Linux 5.1-rc6 state >>>>>> >>>>>> Any ideas hint how to resolve this issue? Thanks. >>>>>> >>>>> >>>>> Can you try to cherry-pick the following two patches to your tree: >>>>> 5051377a0b ("arm: dts: bcm283x: Rename U-Boot file") >>>>> 89e47e8eb6 ("fdt: fix bcm283x dm-pre-reloc definitions") >>>> But those are present in 2020.01 and this version at least print >>>> something to console but stuck somewhere (pls see pastebin log with >>>> debug enabled) >>>> I prefer to run 2020.01 ;). Thanks. >>> Any other stuff I can try to make it working in 2020.01? Could that be >>> firmware issue somehow? Thanks. >> >> Sorry I didn't realized that your first try was with 2020.01. >> I just confirmed that it acutually does not boot. As a shortcut, do you know >> which is the last working version of U-Boot? > v2019.07 with reverted commit : > 143256b353c4d2ad1cf5e5e63b38410188b35e49 - fdt: update bcm283x device > tree sources to Linux 5.1-rc6 state > work fine. Without revert it shows anything on console. So something > between 2019.07..2020.01 mus fix it partially ;) I just tired v2020.04 and it works for me. Would you mind testing that on your end? Do you have a hard dependency on v2020.01? Regards, Matthias