All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: James Alexander <opensource@inspiredexperts.com>
Cc: Daniel Scally <dan.scally@ideasonboard.com>,
	 Sakari Ailus <sakari.ailus@linux.intel.com>,
	 Hans de Goede <hansg@kernel.org>,
	platform-driver-x86@vger.kernel.org,
	 LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] platform/x86: int3472: add HP Spectre handshake delay
Date: Tue, 18 Aug 2026 13:15:12 +0300 (EEST)	[thread overview]
Message-ID: <efd97842-f8af-e2eb-c2ea-2e5a13f57040@linux.intel.com> (raw)
In-Reply-To: <20260816204247.2844986-1-opensource@inspiredexperts.com>

On Sun, 16 Aug 2026, James Alexander wrote:

> The OVTI08F4 sensor on an HP Spectre x360 14-eu0xxx failed to read its
> chip ID with error -121 when the existing 45 ms handshake delay was used.
> Increasing the delay to 150 ms allowed the sensor to probe.
> 
> Keep the existing delay for other OVTI08F4 systems. Add a reusable
> handshake-delay field to the discrete-device quirks and set it only for the
> affected HP Spectre family through DMI matching.
> 
> Compile-tested against Linux base fd923b32d761. Hardware-tested with the
> full patch set across 25 consecutive reboots on the affected laptop running
> Ubuntu 7.0.0-29-generic; the sensor probed successfully on every boot.
> 
> Signed-off-by: James Alexander <opensource@inspiredexperts.com>
> ---
> diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
> index 115bb3757..80efeb452 100644
> --- a/drivers/platform/x86/intel/int3472/discrete.c
> +++ b/drivers/platform/x86/intel/int3472/discrete.c
> @@ -193,6 +193,9 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3
>  			      GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
>  		*con_id = int3472_gpio_map[i].con_id;
>  		*enable_time_us = int3472_gpio_map[i].enable_time_us;
> +		if (int3472_gpio_map[i].type_to == INT3472_GPIO_TYPE_HANDSHAKE &&
> +		    int3472->quirks.handshake_enable_time_us)
> +			*enable_time_us = int3472->quirks.handshake_enable_time_us;
>  		return;
>  	}
>  
> diff --git a/drivers/platform/x86/intel/int3472/discrete_quirks.c b/drivers/platform/x86/intel/int3472/discrete_quirks.c
> index 552869ef9..d31f7c764 100644
> --- a/drivers/platform/x86/intel/int3472/discrete_quirks.c
> +++ b/drivers/platform/x86/intel/int3472/discrete_quirks.c
> @@ -8,6 +8,10 @@ static const struct int3472_discrete_quirks lenovo_miix_510_quirks = {
>  	.avdd_second_sensor = "i2c-OVTI2680:00",
>  };
>  
> +static const struct int3472_discrete_quirks hp_spectre_14_eu0xxx_quirks = {
> +	.handshake_enable_time_us = 150 * USEC_PER_MSEC,

Hi,

Please add include for USEC_PER_MSEC.

--
 i.

> +};
> +
>  const struct dmi_system_id skl_int3472_discrete_quirks[] = {
>  	{
>  		/* Lenovo Miix 510-12IKB */
> @@ -17,5 +21,14 @@ const struct dmi_system_id skl_int3472_discrete_quirks[] = {
>  		},
>  		.driver_data = (void *)&lenovo_miix_510_quirks,
>  	},
> +	{
> +		/* HP Spectre x360 2-in-1 Laptop 14-eu0xxx */
> +		.matches = {
> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "HP"),
> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME,
> +					"HP Spectre x360 2-in-1 Laptop 14-eu0xxx"),
> +		},
> +		.driver_data = (void *)&hp_spectre_14_eu0xxx_quirks,
> +	},
>  	{ }
>  };
> diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h
> index a73841dfa..797694aa8 100644
> --- a/include/linux/platform_data/x86/int3472.h
> +++ b/include/linux/platform_data/x86/int3472.h
> @@ -96,6 +96,8 @@ struct int3472_cldb {
>  struct int3472_discrete_quirks {
>  	/* For models where AVDD GPIO is shared between sensors */
>  	const char *avdd_second_sensor;
> +	/* Override the default delay for handshake GPIO regulators */
> +	unsigned int handshake_enable_time_us;
>  };
>  
>  struct int3472_gpio_regulator {
> 

  reply	other threads:[~2026-08-18 10:15 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-16 20:42 [PATCH] platform/x86: int3472: add HP Spectre handshake delay James Alexander
2026-08-18 10:15 ` Ilpo Järvinen [this message]
2026-08-18 10:43 ` Hans de Goede
2026-08-18 11:00   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=efd97842-f8af-e2eb-c2ea-2e5a13f57040@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=dan.scally@ideasonboard.com \
    --cc=hansg@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=opensource@inspiredexperts.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.