From: "Stiffler, Jacob" <j-stiffler@ti.com>
To: "Radhakrishnan, Mahesh" <m-radhakrishnan2@ti.com>,
"meta-ti@yoctoproject.org" <meta-ti@yoctoproject.org>
Subject: Re: [EXTERNAL] [rocko/master][PATCH v3 00/29] RTOS patches(V3) for Procsdk 5.1 release
Date: Mon, 1 Oct 2018 12:14:09 +0000 [thread overview]
Message-ID: <efe1ebae5494424d9b36adc4726b0fa7@ti.com> (raw)
In-Reply-To: <1538151990-44823-1-git-send-email-m-radhakrishnan2@ti.com>
Denys,
Can you please backport this set along with ti-pdk.bbclass patch to ti2018.03?
Thank you,
Jake
> -----Original Message-----
> From: meta-ti-bounces@yoctoproject.org [mailto:meta-ti-
> bounces@yoctoproject.org] On Behalf Of Radhakrishnan, Mahesh
> Sent: Friday, September 28, 2018 12:26 PM
> To: meta-ti@yoctoproject.org
> Subject: [EXTERNAL] [meta-ti] [rocko/master][PATCH v3 00/29] RTOS
> patches(V3) for Procsdk 5.1 release
>
> This is the version 3 of the RTOS patches with the following differences
> from v2
> 1) ti-pdk.bbclass patch is removed as the changes on the v1/v2 patches are
> not needed.
> Hence this patchset contains only 29 patches (the v1/v2 had 30 patches in
> them)
> 2) board-rtos: Corrected the DEPENDS_append_am65xx -->
> DEPENDS_append_k3 as per review comments
> 3) mcasp-lld-rtos & pcie-lld-rtos: Mentioned the LIC checksum change
> details (due to copyright header) in the commit description
> 4) Used -M01 -C01 option while sending the patches to highlight the
> renaming of ti-ndk_2.xxx -> ti-ndk_3.xx
>
>
> Mahesh Radhakrishnan (29):
> common-csl-ip: Update to version 03.03.00.12
> osal: SRCREV update to 01.00.00.12.r1
> ti-pdk-build: Update to version 01.00.00.10A
> uart-lld-rtos: Update to version 01.00.00.12
> board-rtos: Update to version 01.00.10.02 and added support to k3
> i2c-lld-rtos: Update to version 01.00.00.02 and added support to k3
> gpio-lld-rtos: Update to version 01.00.00.12 and added support to k3
> icss-emac-lld: Update to version 01.00.00.13
> emac-lld-rtos:Update to version 01.00.03.12A and added support to k3
> starterware: Update to version 02.01.01.08
> mmcsd-lld-rtos: Update to version 01.00.00.13 and added k3 support
> mcasp-lld-rtos: Update to 01.00.00.11A and add support to k3
> fatfs-rtos: Update to version 01.00.00.11 & added k3 support
> mcbsp-lld-rtos: Update to version 01.00.00.11A
> pa-lld: Update to version 03.00.02.07
> pm-lld-rtos: Update to version 01.08.00.19 and k3 support
> udma-lld-rtos: Added support for udma-lld on rtos (initial version)
> spi-lld-rtos: Update to version 01.00.00.12A and added k3 support
> pcie-lld-rtos: Update to version 02.03.00.01 and added k3 support
> pruss-lld: pruss-lld-rtos: Update to version 01.00.00.11 and added k3
> support for rtos
> sa-lld: sa-lld-rtos: Updated to version 04.00.00.00A, added k3 support
> and makefile build for k3
> transport-rtos: nimu-rtos: Updated to version 01.00.00.13 & added k3
> support
> sciclient-rtos: SRCREV update
> usb-lld-rtos: update to versin 01.00.00.15A and added k3 support
> profiling-rtos: Update to version 01.00.00.07 and added k3 support
> vps-lld-rtos: Updated to version 01.00.01.13
> ti-ndk: Upgrading to 3.40.01.01
> ti-ns: Adding support for TI network services
> cmb-addon: Update to version 01.01.00.02
>
> recipes-bsp/board-rtos/board-rtos_git.bb | 15 +++--
> recipes-bsp/cmb-addon/cmb-addon-rtos_git.bb | 6 +-
> recipes-bsp/common-csl-ip/common-csl-ip.inc | 7 +-
> recipes-bsp/emac-lld/emac-lld-rtos_git.bb | 11 ++--
> recipes-bsp/fatfs-rtos/fatfs-rtos_git.bb | 8 +--
> recipes-bsp/gpio-lld/gpio-lld-rtos_git.bb | 8 +--
> recipes-bsp/i2c-lld/i2c-lld-rtos_git.bb | 8 +--
> recipes-bsp/icss-emac-lld/icss-emac-lld.inc | 2 +-
> recipes-bsp/mcasp-lld/mcasp-lld-rtos_git.bb | 15 +++--
> recipes-bsp/mcbsp-lld/mcbsp-lld-rtos_git.bb | 6 +-
> recipes-bsp/mmcsd-lld/mmcsd-lld-rtos_git.bb | 9 +--
> recipes-bsp/osal/osal.inc | 4 +-
> recipes-bsp/pa-lld/pa-lld.inc | 6 +-
> recipes-bsp/pcie-lld/pcie-lld-rtos_git.bb | 13 ++--
> recipes-bsp/pm-lld/pm-lld-rtos_git.bb | 30 +++++----
> recipes-bsp/pruss-lld/pruss-lld-rtos_git.bb | 1 +
> recipes-bsp/pruss-lld/pruss-lld.inc | 6 +-
> recipes-bsp/sa-lld/sa-lld-rtos_git.bb | 14 +++-
> recipes-bsp/sa-lld/sa-lld.inc | 6 +-
> recipes-bsp/sciclient/sciclient-rtos_git.bb | 6 +-
> recipes-bsp/spi-lld/spi-lld-rtos_git.bb | 12 ++--
> recipes-bsp/starterware/starterware.inc | 6 +-
> recipes-bsp/transport-rtos/nimu-rtos_git.bb | 3 +-
> recipes-bsp/transport-rtos/transport.inc | 6 +-
> recipes-bsp/uart-lld/uart-lld-rtos_git.bb | 11 ++--
> .../udma-lld-rtos_git.bb} | 75 +++++++++-------------
> recipes-bsp/usb-lld/usb-lld-rtos_git.bb | 8 +--
> recipes-bsp/utils-rtos/profiling-rtos_git.bb | 8 +--
> recipes-bsp/vps-lld/vps-lld-rtos_git.bb | 6 +-
> recipes-ti/includes/ti-paths.inc | 2 +
> .../{ti-ndk_2.26.00.08.bb => ti-ndk_3.40.01.01.bb} | 8 +--
> .../ti-pdk-build-rtos_git.bb => ns/ti-ns.inc} | 48 ++++----------
> .../ti-ns_2.40.01.02.bb} | 11 ++--
> recipes-ti/ti-pdk-build/ti-pdk-build-rtos_git.bb | 6 +-
> 34 files changed, 204 insertions(+), 187 deletions(-)
> copy recipes-bsp/{sciclient/sciclient-rtos_git.bb => udma-lld/udma-lld-
> rtos_git.bb} (22%)
> copy recipes-ti/ndk/{ti-ndk_2.26.00.08.bb => ti-ndk_3.40.01.01.bb} (31%)
> copy recipes-ti/{ti-pdk-build/ti-pdk-build-rtos_git.bb => ns/ti-ns.inc} (5%)
> rename recipes-ti/{ndk/ti-ndk_2.26.00.08.bb => ns/ti-ns_2.40.01.02.bb}
> (21%)
>
> --
> 1.9.1
>
> --
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
prev parent reply other threads:[~2018-10-01 12:14 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-28 16:26 [rocko/master][PATCH v3 00/29] RTOS patches(V3) for Procsdk 5.1 release Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 01/29] common-csl-ip: Update to version 03.03.00.12 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 02/29] osal: SRCREV update to 01.00.00.12.r1 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 03/29] ti-pdk-build: Update to version 01.00.00.10A Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 04/29] uart-lld-rtos: Update to version 01.00.00.12 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 05/29] board-rtos: Update to version 01.00.10.02 and added support to k3 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 06/29] i2c-lld-rtos: Update to version 01.00.00.02 " Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 07/29] gpio-lld-rtos: Update to version 01.00.00.12 " Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 08/29] icss-emac-lld: Update to version 01.00.00.13 Mahesh Radhakrishnan
2018-09-28 17:24 ` Denys Dmytriyenko
2018-09-28 19:14 ` Radhakrishnan, Mahesh
2018-09-28 16:26 ` [rocko/master][PATCH v3 09/29] emac-lld-rtos:Update to version 01.00.03.12A and added support to k3 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 10/29] starterware: Update to version 02.01.01.08 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 11/29] mmcsd-lld-rtos: Update to version 01.00.00.13 and added k3 support Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 12/29] mcasp-lld-rtos: Update to 01.00.00.11A and add support to k3 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 13/29] fatfs-rtos: Update to version 01.00.00.11 & added k3 support Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 14/29] mcbsp-lld-rtos: Update to version 01.00.00.11A Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 15/29] pa-lld: Update to version 03.00.02.07 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 16/29] pm-lld-rtos: Update to version 01.08.00.19 and k3 support Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 17/29] udma-lld-rtos: Added support for udma-lld on rtos (initial version) Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 18/29] spi-lld-rtos: Update to version 01.00.00.12A and added k3 support Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 19/29] pcie-lld-rtos: Update to version 02.03.00.01 " Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 20/29] pruss-lld: pruss-lld-rtos: Update to version 01.00.00.11 and added k3 support for rtos Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 21/29] sa-lld: sa-lld-rtos: Updated to version 04.00.00.00A, added k3 support and makefile build for k3 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 22/29] transport-rtos: nimu-rtos: Updated to version 01.00.00.13 & added k3 support Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 23/29] sciclient-rtos: SRCREV update Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 24/29] usb-lld-rtos: update to versin 01.00.00.15A and added k3 support Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 25/29] profiling-rtos: Update to version 01.00.00.07 " Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 26/29] vps-lld-rtos: Updated to version 01.00.01.13 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 27/29] ti-ndk: Upgrading to 3.40.01.01 Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 28/29] ti-ns: Adding support for TI network services Mahesh Radhakrishnan
2018-09-28 16:26 ` [rocko/master][PATCH v3 29/29] cmb-addon: Update to version 01.01.00.02 Mahesh Radhakrishnan
2018-10-01 12:14 ` Stiffler, Jacob [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=efe1ebae5494424d9b36adc4726b0fa7@ti.com \
--to=j-stiffler@ti.com \
--cc=m-radhakrishnan2@ti.com \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.