Re: Network card driver problem (znb.o/tulip)

[Kosta Todorovic <kostodo@gmail.com>]

Its not really an option to exchange network cards. 

Any other suggestions?




On Thu, 10 Mar 2005 22:00:23 -0800, Ben Greear <greearb@candelatech.com> wrote:
> Kosta Todorovic wrote:
> > My company has recently purchased several ZNYX ZX274 network cards.
> > These cards are Four Channel, 10/100 PCI Adapters. They use Intel chipsets.
> >
> > Unfortunately there exists no drivers for linux amd64 architecture.
> > There are 32bit drivers found at:
> > http://www.znyx.com/support/drivers/ZX374_drivers.htm but naturally
> > they wont compile under my amd64 system.
> >
> > The driver itself is called znb.o and can be downloaded from ZNYX's
> > website. I spoke to support staff there but they told me they have
> > discontinued support and development for this series of cards.
> >
> > The system I am running gentoo and have tried both 2.4.x and 2.6.x
> > kernels but no luck.
> >
> > Unfortunately there is NO 64bit drivers available for ANY platform. not even MS.
> >
> > Does anyone know of a customised znb.o driver built for amd64?
> > Is there any chance of anyone modifying the source code of the driver
> > to compile under a amd64 system?
> >
> > I've noticed that "tulip" drivers get loaded as a module at boot time.
> > but they dont function correctly. (lets you start the device and
> > attach ips but cant talk through it)
> >
> > Is there any variants of the tulip driver that will work for this?
> >
> > Help much appreciated.
> 
> My personal opinion is that those NICs suck.  I never did get mine
> to work.  I'd suggest getting a DFE-570tx if you can find it, or
> perhaps a p430tx.  You can also get 4-port GigE NICs from Intel for
> around $400 these days...
> 
> Ben
> 
> --
> Ben Greear <greearb@candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
> 
>