From: Frank Mandarino <fmandarino@endrelia.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] Add support for AT91RM9200 NAND (Smartmedia) controller
Date: Wed, 06 Dec 2006 12:50:42 -0500 [thread overview]
Message-ID: <el6vtk$ais$1@sea.gmane.org> (raw)
The attached patch adds support for the AT91RM9200 NAND (Smartmedia)
controller, allowing use of the U-Boot NAND commands on AT91RM9200-based
boards which use NAND flash.
It uses four CFG parameters:
CFG_NAND_BASE - address of Smartmedia chip select (normally
0x40000000)
CFG_NAND_AT91_CLE_BIT - address bit number used to set CLE signal
CFG_NAND_AT91_ALE_BIT - address bit number used to set ALE signal
CFG_NAND_CHIP_DELAY - command delay time in microseconds
I have been using this code for almost a year with no problems on our
custom AT91RM9200 board. I believe it would be useful for others as the
popularity of NAND flash increases.
Regards,
../fam
--
Frank Mandarino fmandarino(a)endrelia.com
Endrelia Technologies Inc.
Toronto, Ontario, Canada
-------------- next part --------------
A non-text attachment was scrubbed...
Name: u-boot_at91_nand.patch
Type: text/x-patch
Size: 6032 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20061206/1c728c86/attachment.bin
reply other threads:[~2006-12-06 17:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='el6vtk$ais$1@sea.gmane.org' \
--to=fmandarino@endrelia.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.