From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Moroder Subject: Raid not seen as raind in SLES 10 Installation Date: Mon, 05 Mar 2007 15:22:03 +0100 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from main.gmane.org ([80.91.229.2]:54058 "EHLO ciao.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933403AbXCEOWm (ORCPT ); Mon, 5 Mar 2007 09:22:42 -0500 Received: from list by ciao.gmane.org with local (Exim 4.43) id 1HOE53-0001y9-3o for linux-scsi@vger.kernel.org; Mon, 05 Mar 2007 15:22:25 +0100 Received: from merlin2.provinz.bz.it ([62.101.0.30]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 05 Mar 2007 15:22:25 +0100 Received: from andreas.moroder by merlin2.provinz.bz.it with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 05 Mar 2007 15:22:25 +0100 Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Hello, we have a Fujitsu-Siemens TX200 with a onboard AIC-7902W adapter and 4 disks. We have set them up as two pair of RAID-1 disks. The bios startup-screen shows us two pair of RAID1 disks. When we try to install SLES10 we see 4 disks ! How can we tell Linux that there are only two RAID and why does the kernel see the disks ? Should this not be hidden by the AIC hostadapter ? Is it the INT13 that makes this problems ? Thanks Andreas