Re: [PATCH v2 2/3] platform: arm64: Add a driver for the EC found on ASUS Glymur machines

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

On Tue, 22 Sep 2026, Konrad Dybcio wrote:

> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> Some Qualcomm Snapdragon X2 Elite (Extreme)-based ASUS laptops (at
> least the Zenbook A14 and A16) expose a custom, somewhat
> Qualcomm reference-derived EC interface. Introduce a driver to
> communicate with said EC, allowing for fan speed reporting, keyboard
> backlight setting and receiving of a number of miscellaneous sideband
> events.
> 
> Assisted-by: LLM
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> ---
>  drivers/platform/arm64/Kconfig          |  16 +
>  drivers/platform/arm64/Makefile         |   1 +
>  drivers/platform/arm64/asus-glymur-ec.c | 592 ++++++++++++++++++++++++++++++++
>  3 files changed, 609 insertions(+)
> 
> diff --git a/drivers/platform/arm64/Kconfig b/drivers/platform/arm64/Kconfig
> index e32e01b2a9bd..84c475c62990 100644
> --- a/drivers/platform/arm64/Kconfig
> +++ b/drivers/platform/arm64/Kconfig
> @@ -33,6 +33,22 @@ config EC_ACER_ASPIRE1
>  	  laptop where this information is not properly exposed via the
>  	  standard ACPI devices.
>  
> +config EC_ASUS_GLYMUR
> +	tristate "ASUS Zenbook A16 (Qualcomm) Embedded Controller driver"
> +	depends on ARCH_QCOM || COMPILE_TEST
> +	depends on I2C
> +	depends on HWMON
> +	depends on INPUT
> +	depends on PM
> +	depends on THERMAL || THERMAL=n
> +	select NEW_LEDS
> +	select LEDS_CLASS
> +	help
> +	  Say M or Y here to enable the EC driver for the Qualcomm Snapdragon-
> +	  based ASUS Zenbook A16 (UX3607OA) and similar machines. It provides
> +	  temperature sensors readout, fan monitoring, keyboard and EC event
> +	  reporting.
> +
>  config EC_HUAWEI_GAOKUN
>  	tristate "Huawei Matebook E Go Embedded Controller driver"
>  	depends on ARCH_QCOM || COMPILE_TEST
> diff --git a/drivers/platform/arm64/Makefile b/drivers/platform/arm64/Makefile
> index 7681be4a46e9..7122e8ea325f 100644
> --- a/drivers/platform/arm64/Makefile
> +++ b/drivers/platform/arm64/Makefile
> @@ -6,6 +6,7 @@
>  #
>  
>  obj-$(CONFIG_EC_ACER_ASPIRE1)	+= acer-aspire1-ec.o
> +obj-$(CONFIG_EC_ASUS_GLYMUR) += asus-glymur-ec.o
>  obj-$(CONFIG_EC_HUAWEI_GAOKUN)	+= huawei-gaokun-ec.o
>  obj-$(CONFIG_EC_LENOVO_YOGA_C630) += lenovo-yoga-c630.o
>  obj-$(CONFIG_EC_LENOVO_THINKPAD_T14S) += lenovo-thinkpad-t14s.o
> diff --git a/drivers/platform/arm64/asus-glymur-ec.c b/drivers/platform/arm64/asus-glymur-ec.c
> new file mode 100644
> index 000000000000..dec9b137b820
> --- /dev/null
> +++ b/drivers/platform/arm64/asus-glymur-ec.c
> @@ -0,0 +1,592 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * The EC firmware on the ASUS Zenbook A16 looks to be derived from the
> + * 'Qualcomm Hamoa EC' reference base with many major modifications. Some of
> + * the original interface is reused, albeit many of its core invariants (such
> + * as the capabilities bitmap) are absent.
> + *
> + * It presents itself as two I2C devices:
> + *  [0x5b] is the custom ASUS interface
> + *  [0x76] is the Hamoa EC-derived interface
> + */
> +
> +#include <linux/cleanup.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/pm.h>
> +#include <linux/types.h>
> +#include <linux/unaligned.h>
> +#include <linux/units.h>
> +
> +/* Qualcomm-derived registers (main device @ 0x76) */
> +#define ASUS_QCOM_EC_EVENT_CMD		0x05
> +
> +#define ASUS_QCOM_EC_SUBCMD_FULL_VER	0x0f
> +#define ASUS_QCOM_EC_FULL_VER_LEN	7
> +
> +/* This "read RAM" command isn't actually part of the Qualcomm standard */
> +#define ASUS_QCOM_EC_RECM_OFFS		0x52
> +#define ASUS_QCOM_EC_RECM_FRAME_LEN	5
> +
> +#define ASUS_QCOM_EC_RAM_FAN_CPU	0x0602
> +#define ASUS_QCOM_EC_RAM_AC_STATUS	0x0609
> +#define ASUS_QCOM_EC_RAM_FAN_GPU	0x0624
> +
> +#define ASUS_QCOM_EC_MODERN_STANDBY_CMD		0x23
> +#define ASUS_QCOM_EC_MODERN_STANDBY_ENTER	0x07
> +#define ASUS_QCOM_EC_MODERN_STANDBY_EXIT	0x08
> +
> +/* ASUS-specific registers (secondary device @ 0x5b) */
> +#define ASUS_EC_SUBDEV_ADDR		0x5b
> +
> +#define ASUS_EC_REQ_REG			0x10
> +#define ASUS_EC_RESP_REG		0x11
> +
> +#define ASUS_EC_PAGE_MAILBOX		0xc4
> + #define ASUS_EC_MBOX_REG_CMD		0x30
> + #define ASUS_EC_MBOX_REG_SUBCMD	0x31
> + #define ASUS_EC_MBOX_REG_DATA		0x32
> +
> +#define ASUS_EC_MBOX_CMD_KBD		0x01
> + #define ASUS_EC_MBOX_SUBCMD_KBD_EN	0x81
> +  #define ASUS_EC_MBOX_DATA_KBD_EN	0x04
> + #define ASUS_EC_MBOX_SUBCMD_KBD_LVL	0x87
> +
> +#define ASUS_EC_MBOX_CMD_MISC		0x02
> + #define ASUS_EC_MBOX_SUBCMD_MISC_ENABLE	0x83
> +
> +#define ASUS_EC_PAGE_TEMPERATURE	0xc6
> + #define ASUS_EC_TEMP_REG_CPU		0xa6
> + #define ASUS_EC_TEMP_REG_SOC		0x2a
> + #define ASUS_EC_TEMP_MAX		0x7f
> +
> +#define ASUS_EC_KBD_MAX_BRIGHTNESS	3
> +
> +static const u8 asus_ec_kbd_levels[] = {
> +	[0] = 0x00,
> +	[1] = 0x55,
> +	[2] = 0xaa,
> +	[3] = 0xff,
> +};
> +
> +enum asus_ec_event {
> +	ASUS_EC_EVT_CHARGE_STATE = 0x1c,
> +	ASUS_EC_EVT_AC_STATE = 0x1d,
> +	ASUS_EC_EVT_CRIT_TRIP = 0x1e,
> +	ASUS_EC_EVT_THERMISTOR = 0x4f,
> +	ASUS_EC_EVT_HOTKEY = 0xda,
> +	ASUS_EC_EVT_FAN_STATUS = 0xdb,
> +	ASUS_EC_EVT_THERMAL_TRIP = 0xe0,
> +	ASUS_EC_EVT_CHARGE_COMMIT = 0xe4,
> +};
> +
> +struct asus_ec {
> +	struct i2c_client *client;
> +	struct i2c_client *subdev_client;
> +	/* Serializes all EC access across both I2C devices */
> +	struct mutex lock;
> +	struct device *hwmon_dev;
> +	struct led_classdev kbd_led;
> +};
> +
> +static int asus_qcom_ec_write(struct asus_ec *ec, u8 offset,
> +			      const u8 *buf, u8 len)
> +{
> +	int ret;
> +
> +	lockdep_assert_held(&ec->lock);

Add include.

> +
> +	ret = i2c_smbus_write_i2c_block_data(ec->client, offset, len, buf);
> +	if (ret < 0)
> +		dev_dbg(&ec->client->dev,
> +			"Main device write off %#x len %u failed: %d\n",
> +			offset, len, ret);

Add include for dev_dbg().

Please add braces to any multiline construct even if they're just a 
single statement in the block.

> +
> +	return ret;
> +}
> +
> +static int asus_qcom_ec_read(struct asus_ec *ec, u8 offset, u8 *buf, u8 len)
> +{
> +	int ret;
> +
> +	lockdep_assert_held(&ec->lock);
> +
> +	ret = i2c_smbus_read_i2c_block_data(ec->client, offset, len, buf);
> +	if (ret < 0)
> +		return ret;
> +	if (ret < len) {
> +		dev_err(&ec->client->dev,
> +			"Short read off %#x: got %d of %u bytes\n",
> +			offset, ret, len);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static int asus_qcom_ec_read_ram(struct asus_ec *ec, u16 addr, u8 count, u16 *out)
> +{
> +	u8 frame[ASUS_QCOM_EC_RECM_FRAME_LEN] = { 0, 0, count, 0, 0 };
> +	u8 resp[ASUS_QCOM_EC_RECM_FRAME_LEN] = { };
> +	int ret;
> +
> +	lockdep_assert_held(&ec->lock);
> +
> +	if (count != 1 && count != 2)
> +		return -EINVAL;
> +
> +	put_unaligned_be16(addr, frame);
> +
> +	ret = asus_qcom_ec_write(ec, ASUS_QCOM_EC_RECM_OFFS, frame,
> +				 ASUS_QCOM_EC_RECM_FRAME_LEN);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = asus_qcom_ec_read(ec, ASUS_QCOM_EC_RECM_OFFS, resp,
> +				ASUS_QCOM_EC_RECM_FRAME_LEN);
> +	if (ret < 0)
> +		return ret;
> +
> +	*out = (count == 2) ? get_unaligned_le16(resp) : resp[0];
> +
> +	return 0;
> +}
> +
> +static int asus_ec_readb(struct asus_ec *ec, u8 page, u8 reg, u8 *out)
> +{
> +	u8 sel[2] = { page, reg };
> +	int ret;
> +
> +	lockdep_assert_held(&ec->lock);
> +
> +	ret = i2c_smbus_write_i2c_block_data(ec->subdev_client,
> +					     ASUS_EC_REQ_REG,
> +					     sizeof(sel), sel);

Fits to two lines.

> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_smbus_read_byte_data(ec->subdev_client, ASUS_EC_RESP_REG);
> +	if (ret < 0)
> +		return ret;
> +
> +	*out = ret;
> +
> +	return 0;
> +}
> +
> +static int asus_ec_writeb(struct asus_ec *ec, u8 page, u8 reg, u8 data)
> +{
> +	u8 sel[2] = { page, reg };
> +	int ret;
> +
> +	lockdep_assert_held(&ec->lock);
> +
> +	ret = i2c_smbus_write_i2c_block_data(ec->subdev_client,
> +					     ASUS_EC_REQ_REG,
> +					     sizeof(sel), sel);

Fits to two lines.

> +	if (ret < 0)
> +		return ret;
> +
> +	return i2c_smbus_write_byte_data(ec->subdev_client,
> +					 ASUS_EC_RESP_REG, data);
> +}
> +
> +static int asus_ec_mailbox_cmd(struct asus_ec *ec, u8 cmd, u8 sub, u8 data)
> +{
> +	int ret, tries;
> +	u8 status;
> +
> +	lockdep_assert_held(&ec->lock);
> +
> +	for (tries = 5; tries > 0; tries--) {
> +		ret = asus_ec_readb(ec, ASUS_EC_PAGE_MAILBOX,
> +				    ASUS_EC_MBOX_REG_CMD, &status);
> +		if (ret < 0)
> +			return ret;
> +		if (status == 0)
> +			break;
> +		usleep_range(5000, 6000);
> +	}
> +	if (tries == 0)
> +		return -EBUSY;
> +
> +	ret = asus_ec_writeb(ec, ASUS_EC_PAGE_MAILBOX, ASUS_EC_MBOX_REG_SUBCMD, sub);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = asus_ec_writeb(ec, ASUS_EC_PAGE_MAILBOX, ASUS_EC_MBOX_REG_DATA, data);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = asus_ec_writeb(ec, ASUS_EC_PAGE_MAILBOX, ASUS_EC_MBOX_REG_CMD, cmd);
> +	if (ret < 0)
> +		return ret;
> +
> +	for (tries = 5; tries > 0; tries--) {
> +		ret = asus_ec_readb(ec, ASUS_EC_PAGE_MAILBOX,
> +				    ASUS_EC_MBOX_REG_CMD, &status);
> +		if (ret < 0)
> +			return ret;
> +		if (status == 0)
> +			return 0;
> +
> +		usleep_range(5000, 6000);
> +	}

This waiting code seems to be duplicated so it should be moved into own 
function.

> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int asus_ec_enable_writes(struct asus_ec *ec)
> +{
> +	guard(mutex)(&ec->lock);
> +
> +	return asus_ec_mailbox_cmd(ec, ASUS_EC_MBOX_CMD_MISC,
> +				   ASUS_EC_MBOX_SUBCMD_MISC_ENABLE, 1);
> +}
> +
> +static int asus_ec_read_version(struct asus_ec *ec, u8 *major, u8 *minor, u8 *patch)
> +{
> +	u8 resp[ASUS_QCOM_EC_FULL_VER_LEN + 1];
> +	int ret;
> +
> +	guard(mutex)(&ec->lock);
> +
> +	ret = asus_qcom_ec_read(ec, ASUS_QCOM_EC_SUBCMD_FULL_VER,
> +				resp, sizeof(resp));
> +	if (ret < 0)
> +		return ret;
> +	if (resp[0] < ASUS_QCOM_EC_FULL_VER_LEN)
> +		return -EIO;
> +
> +	*major = resp[3];
> +	*minor = resp[2];
> +	*patch = resp[1];
> +
> +	return 0;
> +}
> +
> +static int asus_ec_get_temp(struct asus_ec *ec, u8 reg, long *millideg)
> +{
> +	u8 raw;
> +	int ret;
> +
> +	guard(mutex)(&ec->lock);
> +
> +	ret = asus_ec_readb(ec, ASUS_EC_PAGE_TEMPERATURE, reg, &raw);
> +	if (ret < 0)
> +		return ret;
> +	if (raw > ASUS_EC_TEMP_MAX)
> +		return -ENODATA;
> +
> +	*millideg = raw * MILLIDEGREE_PER_DEGREE;
> +
> +	return 0;
> +}
> +
> +static int asus_ec_get_fan_rpm(struct asus_ec *ec, u16 base, long *rpm)
> +{
> +	u16 val;
> +	int ret;
> +
> +	guard(mutex)(&ec->lock);
> +
> +	ret = asus_qcom_ec_read_ram(ec, base, 2, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	*rpm = val;
> +
> +	return 0;
> +}
> +
> +static irqreturn_t asus_ec_irq(int irq, void *data)
> +{
> +	struct asus_ec *ec = data;
> +	struct device *dev = &ec->client->dev;
> +	int code;
> +
> +	scoped_guard(mutex, &ec->lock)
> +		code = i2c_smbus_read_byte_data(ec->client, ASUS_QCOM_EC_EVENT_CMD);
> +
> +	if (code < 0) {
> +		dev_err_ratelimited(dev, "Failed to read EC event: %d\n", code);
> +		return IRQ_HANDLED;
> +	}
> +	if (code == 0 || code == 0xff)

Could these literals be named with defines?

> +		return IRQ_HANDLED;
> +
> +	switch (code) {
> +	case ASUS_EC_EVT_HOTKEY:
> +		/* Present in DSDT, don't know what triggers it */
> +		dev_dbg_ratelimited(dev, "EC hotkey event\n");
> +		break;
> +
> +	case ASUS_EC_EVT_FAN_STATUS:
> +		dev_dbg_ratelimited(dev, "Fan status changed\n");
> +		break;
> +
> +	/* Maybe the temperature of the EC itself? */
> +	case ASUS_EC_EVT_THERMAL_TRIP:
> +	case ASUS_EC_EVT_CRIT_TRIP:
> +	/* ASUS_EC_TEMP_SOC climbing above 91 *C or falling below 92 *C */
> +	case ASUS_EC_EVT_THERMISTOR:
> +		dev_dbg_ratelimited(dev, "Thermal event %#x\n", code);
> +		break;
> +
> +	case ASUS_EC_EVT_AC_STATE: {
> +		u16 ac = 0;
> +		int ret;
> +
> +		/* TODO: ping SoCCP over the pmic_glink OEM-specific interface */
> +		scoped_guard(mutex, &ec->lock)
> +			ret = asus_qcom_ec_read_ram(ec, ASUS_QCOM_EC_RAM_AC_STATUS, 1, &ac);
> +		if (ret < 0)
> +			dev_warn_ratelimited(dev,
> +					     "Failed to read AC status: %d\n",
> +					     ret);

Add braces to if/else.

Usually, the error handling is done on the same level as the call, even if 
it wouldn't strictly need to hold the mutex.

> +		else
> +			dev_info_ratelimited(dev, "AC event: 0x%x\n", ac);

How is this print useful for a normal user?

> +		break;
> +	}
> +	case ASUS_EC_EVT_CHARGE_STATE:
> +	case ASUS_EC_EVT_CHARGE_COMMIT:
> +		break;
> +
> +	default:
> +		dev_info_ratelimited(dev, "unknown EC event: %#x\n", code);
> +		break;
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int asus_ec_kbd_led_set(struct led_classdev *led,
> +			       enum led_brightness brightness)
> +{
> +	struct asus_ec *ec = container_of(led, struct asus_ec, kbd_led);

Please add include for container_of().

> +	int ret;
> +
> +	if (brightness > ASUS_EC_KBD_MAX_BRIGHTNESS)
> +		brightness = ASUS_EC_KBD_MAX_BRIGHTNESS;
> +
> +	guard(mutex)(&ec->lock);
> +
> +	ret = asus_ec_mailbox_cmd(ec, ASUS_EC_MBOX_CMD_KBD, ASUS_EC_MBOX_SUBCMD_KBD_EN,
> +				  ASUS_EC_MBOX_DATA_KBD_EN);
> +	if (ret < 0)
> +		return ret;
> +
> +	return asus_ec_mailbox_cmd(ec, ASUS_EC_MBOX_CMD_KBD, ASUS_EC_MBOX_SUBCMD_KBD_LVL,
> +				   asus_ec_kbd_levels[brightness]);
> +}
> +
> +enum asus_ec_temp_channel {
> +	/* External sensor? */
> +	ASUS_EC_TEMP_CPU,
> +	/* Likely SoC-internal temp data communicated over a side channel */
> +	ASUS_EC_TEMP_SOC,
> +	ASUS_EC_TEMP_COUNT,
> +};
> +
> +static umode_t asus_ec_hwmon_is_visible(const void *data,
> +					enum hwmon_sensor_types type,
> +					u32 attr, int channel)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +	case hwmon_temp:
> +		return 0444;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static int asus_ec_hwmon_read(struct device *dev,
> +			      enum hwmon_sensor_types type,
> +			      u32 attr, int channel, long *val)
> +{
> +	struct asus_ec *ec = dev_get_drvdata(dev);
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (channel) {
> +		case ASUS_EC_TEMP_CPU:
> +			return asus_ec_get_temp(ec, ASUS_EC_TEMP_REG_CPU, val);
> +		case ASUS_EC_TEMP_SOC:
> +			return asus_ec_get_temp(ec, ASUS_EC_TEMP_REG_SOC, val);
> +		default:
> +			return -EINVAL;
> +		}
> +	case hwmon_fan:
> +		switch (channel) {
> +		case 0:
> +			return asus_ec_get_fan_rpm(ec, ASUS_QCOM_EC_RAM_FAN_CPU, val);
> +		case 1:
> +			return asus_ec_get_fan_rpm(ec, ASUS_QCOM_EC_RAM_FAN_GPU, val);
> +		default:
> +			return -EINVAL;
> +		}
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int asus_ec_hwmon_read_string(struct device *dev,
> +				     enum hwmon_sensor_types type,
> +				     u32 attr, int channel, const char **str)
> +{
> +	if (type != hwmon_temp || channel >= ASUS_EC_TEMP_COUNT)
> +		return -EINVAL;
> +
> +	switch (channel) {
> +	case ASUS_EC_TEMP_CPU:
> +		*str = "CPU";
> +		break;
> +	case ASUS_EC_TEMP_SOC:
> +		*str = "SoC";
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct hwmon_channel_info * const asus_ec_hwmon_info[] = {
> +	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
> +	HWMON_CHANNEL_INFO(temp,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL),
> +	HWMON_CHANNEL_INFO(fan,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT),
> +	NULL
> +};
> +
> +static const struct hwmon_ops asus_ec_hwmon_ops = {
> +	.is_visible	= asus_ec_hwmon_is_visible,
> +	.read		= asus_ec_hwmon_read,
> +	.read_string	= asus_ec_hwmon_read_string,
> +};
> +
> +static const struct hwmon_chip_info asus_ec_hwmon_chip_info = {
> +	.ops	= &asus_ec_hwmon_ops,
> +	.info	= asus_ec_hwmon_info,
> +};
> +
> +static int asus_glymur_ec_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	u8 major, minor, patch;
> +	struct asus_ec *ec;
> +	int ret;
> +
> +	ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL);
> +	if (!ec)
> +		return -ENOMEM;
> +
> +	ec->client = client;
> +	i2c_set_clientdata(client, ec);
> +
> +	ret = devm_mutex_init(dev, &ec->lock);
> +	if (ret)
> +		return ret;
> +
> +	ec->subdev_client = devm_i2c_new_dummy_device(dev, client->adapter,
> +						      ASUS_EC_SUBDEV_ADDR);
> +	if (IS_ERR(ec->subdev_client))
> +		return dev_err_probe(dev, PTR_ERR(ec->subdev_client),
> +				     "Failed to register 0x5b EC device\n");

Add braces to multiline statements.

> +	ret = asus_ec_enable_writes(ec);
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "Failed to enable EC direct access: %d\n", ret);
> +
> +	ret = asus_ec_read_version(ec, &major, &minor, &patch);
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "Failed to read EC version: %d\n", ret);
> +
> +	dev_dbg(dev, "ASUS Zenbook EC version %u.%u.%u\n", major, minor, patch);
> +
> +	ec->kbd_led.name = "asus::kbd_backlight";
> +	ec->kbd_led.max_brightness = ASUS_EC_KBD_MAX_BRIGHTNESS;
> +	ec->kbd_led.brightness_set_blocking = asus_ec_kbd_led_set;
> +	ec->kbd_led.flags = LED_CORE_SUSPENDRESUME;
> +
> +	ret = devm_led_classdev_register(dev, &ec->kbd_led);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to register keyboard LED\n");
> +
> +	ret = devm_request_threaded_irq(dev, client->irq, NULL, asus_ec_irq,
> +					IRQF_ONESHOT, dev_name(dev), ec);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to request IRQ\n");
> +
> +	ec->hwmon_dev = devm_hwmon_device_register_with_info(dev,
> +							     "asus_glymur_ec",
> +							     ec,
> +							     &asus_ec_hwmon_chip_info,
> +							     NULL);
> +	if (IS_ERR(ec->hwmon_dev))
> +		return dev_err_probe(dev, PTR_ERR(ec->hwmon_dev),
> +				     "Failed to register hwmon\n");

Ditto.

> +
> +	return 0;
> +}
> +
> +static int asus_glymur_ec_modern_standby(struct asus_ec *ec, u8 val)
> +{
> +	guard(mutex)(&ec->lock);
> +
> +	return i2c_smbus_write_byte_data(ec->client,
> +					 ASUS_QCOM_EC_MODERN_STANDBY_CMD, val);
> +}
> +
> +static int asus_glymur_ec_suspend(struct device *dev)
> +{
> +	return asus_glymur_ec_modern_standby(dev_get_drvdata(dev),
> +					     ASUS_QCOM_EC_MODERN_STANDBY_ENTER);
> +}
> +
> +static int asus_glymur_ec_resume(struct device *dev)
> +{
> +	return asus_glymur_ec_modern_standby(dev_get_drvdata(dev),
> +					     ASUS_QCOM_EC_MODERN_STANDBY_EXIT);
> +}
> +
> +static DEFINE_SIMPLE_DEV_PM_OPS(asus_glymur_ec_pm_ops,
> +				asus_glymur_ec_suspend,
> +				asus_glymur_ec_resume);
> +
> +static const struct of_device_id asus_glymur_ec_of_match[] = {
> +	{ .compatible = "asus,zenbook-a14-ux3407na-ec" },
> +	{ .compatible = "asus,zenbook-a16-ux3607oa-ec" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, asus_glymur_ec_of_match);
> +
> +static const struct i2c_device_id asus_glymur_ec_id[] = {
> +	{ "asus-glymur-ec" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, asus_glymur_ec_id);
> +
> +static struct i2c_driver asus_glymur_ec_driver = {
> +	.driver = {
> +		.name		= "asus-glymur-ec",
> +		.of_match_table	= asus_glymur_ec_of_match,
> +		.pm		= pm_sleep_ptr(&asus_glymur_ec_pm_ops),
> +	},
> +	.probe		= asus_glymur_ec_probe,
> +	.id_table	= asus_glymur_ec_id,
> +};
> +module_i2c_driver(asus_glymur_ec_driver);
> +
> +MODULE_DESCRIPTION("ASUS Zenbook A16 (Qualcomm) Embedded Controller driver");
> +MODULE_LICENSE("GPL");
> 
> 

-- 
 i.