All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bowers, AndrewX <andrewx.bowers@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH S37 02/15] ice: Fix switch between FW and SW LLDP
Date: Fri, 24 Jan 2020 23:17:07 +0000	[thread overview]
Message-ID: <f36e6fafc0e1406e8fd14f3e73c4d3d9@intel.com> (raw)
In-Reply-To: <20200122152041.41498-2-anthony.l.nguyen@intel.com>

> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at osuosl.org] On
> Behalf Of Tony Nguyen
> Sent: Wednesday, January 22, 2020 7:20 AM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S37 02/15] ice: Fix switch between FW and
> SW LLDP
> 
> From: Dave Ertman <david.m.ertman@intel.com>
> 
> When switching between FW and SW LLDP mode, the number of configured
> TLV apps in the driver's DCB configuration is getting out of synch with what
> lldpad thinks is configured.  This is causing a problem when shutting down
> lldpad.  The cleanup is trying to delete TLV apps that are not defined in the
> kernel.
> 
> Since the driver is keeping an accurate account of the apps defined, use the
> drivers number of apps to determine if there is an app to delete.
> If the number of apps is <= 1, then do not attempt to delete.
> 
> Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_dcb_nl.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>



  reply	other threads:[~2020-01-24 23:17 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-22 15:20 [Intel-wired-lan] [PATCH S37 01/15] ice: Fix DCB rebuild after reset Tony Nguyen
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 02/15] ice: Fix switch between FW and SW LLDP Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX [this message]
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 03/15] ice: display supported and advertised link modes Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 04/15] ice: Don't allow same value for Rx tail to be written twice Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 05/15] ice: Remove ice_dev_onetime_setup() Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 06/15] ice: Remove CONFIG_PCI_IOV wrap in ice_set_pf_caps Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 07/15] ice: Modify link message logging Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 08/15] ice: fix and consolidate logging of NVM/firmware version information Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 09/15] ice: update Unit Load Status bitmask to check after reset Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 10/15] ice: Remove possible null dereference Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 11/15] ice: Use ice_pf_to_dev Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 12/15] ice: Make print statements more compact Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 13/15] ice: Cleanup ice_vsi_alloc_q_vectors Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 14/15] ice: Use correct netif error function Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-22 15:20 ` [Intel-wired-lan] [PATCH S37 15/15] ice: Trivial fixes Tony Nguyen
2020-01-24 23:17   ` Bowers, AndrewX
2020-01-24 23:17 ` [Intel-wired-lan] [PATCH S37 01/15] ice: Fix DCB rebuild after reset Bowers, AndrewX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f36e6fafc0e1406e8fd14f3e73c4d3d9@intel.com \
    --to=andrewx.bowers@intel.com \
    --cc=intel-wired-lan@osuosl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.