From: Johann Neuhauser <jneuhauser@dh-electronics.com>
To: "Marek MV. Vasut" <marex@denx.de>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Cc: "Marek MV. Vasut" <marex@denx.de>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Christophe Roullier <christophe.roullier@foss.st.com>,
Gabriel Fernandez <gabriel.fernandez@foss.st.com>,
Patrice Chotard <patrice.chotard@foss.st.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Stephen Boyd <sboyd@kernel.org>,
"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
"linux-stm32@st-md-mailman.stormreply.com"
<linux-stm32@st-md-mailman.stormreply.com>
Subject: RE: [PATCH 4/5] ARM: dts: stm32: Add alternate pinmux for mco2 pins
Date: Thu, 20 Jan 2022 12:07:54 +0000 [thread overview]
Message-ID: <f6be9f579bfb4588847ab1326902eee1@dh-electronics.com> (raw)
In-Reply-To: <20220118202958.1840431-4-marex@denx.de>
> From: Marek Vasut [mailto:marex@denx.de]
> Sent: Tuesday, January 18, 2022 9:30 PM
>
> Add pinmux option for MCO2 pin. This is used on DHCOM when the
> ethernet PHY 50 MHz clock is generated by the MCO2 on PG2 pin.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Cc: Christophe Roullier <christophe.roullier@foss.st.com>
> Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
> Cc: Patrice Chotard <patrice.chotard@foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: linux-clk@vger.kernel.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> To: linux-arm-kernel@lists.infradead.org
> ---
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index 2cd2ac9beaf20..6da84e3f05ea3 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -882,6 +882,21 @@ pins {
> };
> };
>
> + mco2_pins_a: mco2-0 {
> + pins {
> + pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <2>;
> + };
> + };
> +
> + mco2_sleep_pins_a: mco2-sleep-0 {
> + pins {
> + pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
> + };
> + };
> +
> m_can1_pins_a: m-can1-0 {
> pins1 {
> pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
> --
> 2.34.1
Tested-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-20 12:09 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-18 20:29 [PATCH 1/5] clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock Marek Vasut
2022-01-18 20:29 ` Marek Vasut
2022-01-18 20:29 ` [PATCH 2/5] clk: stm32mp1: Add parent_data to ETHRX clock Marek Vasut
2022-01-18 20:29 ` Marek Vasut
2022-01-20 12:07 ` Johann Neuhauser
2022-01-20 12:07 ` Johann Neuhauser
2022-01-21 9:05 ` gabriel.fernandez
2022-01-21 9:05 ` gabriel.fernandez
2022-01-25 1:16 ` Stephen Boyd
2022-01-25 1:16 ` Stephen Boyd
2022-01-18 20:29 ` [PATCH 3/5] ARM: dts: stm32: Add alternate pinmux for ethernet0 pins Marek Vasut
2022-01-18 20:29 ` Marek Vasut
2022-01-20 12:07 ` Johann Neuhauser
2022-02-07 11:47 ` Alexandre TORGUE
2022-02-07 11:47 ` Alexandre TORGUE
2022-01-18 20:29 ` [PATCH 4/5] ARM: dts: stm32: Add alternate pinmux for mco2 pins Marek Vasut
2022-01-18 20:29 ` Marek Vasut
2022-01-20 12:07 ` Johann Neuhauser [this message]
2022-02-07 11:48 ` Alexandre TORGUE
2022-02-07 11:48 ` Alexandre TORGUE
2022-01-18 20:29 ` [PATCH 5/5] ARM: dts: stm32: Switch DWMAC RMII clock to MCO2 on DHCOM Marek Vasut
2022-01-18 20:29 ` Marek Vasut
2022-01-20 12:08 ` Johann Neuhauser
2022-01-20 12:08 ` Johann Neuhauser
2022-02-07 11:49 ` Alexandre TORGUE
2022-02-07 11:49 ` Alexandre TORGUE
2022-01-20 12:07 ` [PATCH 1/5] clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock Johann Neuhauser
2022-01-20 22:03 ` Stephen Boyd
2022-01-20 22:03 ` Stephen Boyd
2022-01-20 22:39 ` Marek Vasut
2022-01-20 22:39 ` Marek Vasut
2022-01-21 13:12 ` Marek Vasut
2022-01-21 13:12 ` Marek Vasut
2022-01-21 9:03 ` gabriel.fernandez
2022-01-21 9:03 ` gabriel.fernandez
2022-01-25 1:16 ` Stephen Boyd
2022-01-25 1:16 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f6be9f579bfb4588847ab1326902eee1@dh-electronics.com \
--to=jneuhauser@dh-electronics.com \
--cc=alexandre.torgue@foss.st.com \
--cc=christophe.roullier@foss.st.com \
--cc=gabriel.fernandez@foss.st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marex@denx.de \
--cc=patrice.chotard@foss.st.com \
--cc=patrick.delaunay@foss.st.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.