From: Oliver Neukum <oneukum@suse.com>
To: Gregory Greenman <gregory.greenman@intel.com>
Cc: linux-wireless@vger.kernel.org
Subject: warning upon association with latest kernel
Date: Wed, 9 Nov 2022 16:26:39 +0100 [thread overview]
Message-ID: <f6cb6803-602f-91e3-8bd3-3bbbd924731d@suse.com> (raw)
Hi,
I am getting this warning when I connect to my home
wifi upon boot:
[ 1301.812048] Bluetooth: RFCOMM TTY layer initialized
[ 1301.812060] Bluetooth: RFCOMM socket layer initialized
[ 1301.812070] Bluetooth: RFCOMM ver 1.11
[ 1321.250549] wlan0: authenticate with cc:ce:1e:f4:37:95
[ 1321.250577] wlan0: bad VHT capabilities, disabling VHT
[ 1321.250579] wlan0: 80 MHz not supported, disabling VHT
[ 1321.257894] wlan0: send auth to cc:ce:1e:f4:37:95 (try 1/3)
[ 1321.304563] wlan0: authenticated
[ 1321.307142] wlan0: associate with cc:ce:1e:f4:37:95 (try 1/3)
[ 1321.318606] wlan0: RX AssocResp from cc:ce:1e:f4:37:95 (capab=0x1431 status=0 aid=2)
[ 1321.321870] wlan0: associated
[ 1321.321888] ------------[ cut here ]------------
[ 1321.321889] memcpy: detected field-spanning write (size 16) of single field "&compat_event->pointer" at net/wireless/wext-core.c:624 (size 4)
[ 1321.321900] WARNING: CPU: 7 PID: 3102 at net/wireless/wext-core.c:624 wireless_send_event+0x41c/0x480
[ 1321.321908] Modules linked in: rfcomm(E) af_packet(E) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nft_reject(E) nft_ct(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_v4l2(E) videobuf2_common(E) videodev(E) nft_chain_nat(E) cmac(E) algif_hash(E) algif_skcipher(E) af_alg(E) bnep(E) nf_tables(E) ebtable_nat(E) ebtable_broute(E) ip6table_nat(E) ip6table_mangle(E) ip6table_raw(E) ip6table_security(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) iptable_mangle(E) btusb(E) btrtl(E) iptable_raw(E) btbcm(E) btintel(E) btmtk(E) iptable_security(E) bluetooth(E) snd_usb_audio(E) snd_usbmidi_lib(E) snd_rawmidi(E) ecdh_generic(E) snd_seq_device(E) ecc(E) crc16(E) mc(E) ip_set(E) nfnetlink(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) bpfilter(E) snd_ctl_led(E) dmi_sysfs(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_codec_hdmi(E)
[ 1321.321958] snd_hda_intel(E) snd_intel_dspcfg(E) snd_intel_sdw_acpi(E) snd_hda_codec(E) snd_hda_core(E) snd_pci_ps(E) snd_hwdep(E) snd_rn_pci_acp3x(E) snd_pcm(E) snd_acp_config(E) snd_soc_acpi(E) intel_rapl_msr(E) snd_pci_acp3x(E) snd_timer(E) intel_rapl_common(E) edac_mce_amd(E) iwlmvm(E) kvm_amd(E) ccp(E) mac80211(E) libarc4(E) kvm(E) nls_iso8859_1(E) nls_cp437(E) irqbypass(E) crc32_pclmul(E) vfat(E) fat(E) ghash_clmulni_intel(E) iwlwifi(E) xfs(E) sha512_ssse3(E) cfg80211(E) thinkpad_acpi(E) aesni_intel(E) r8169(E) ledtrig_audio(E) platform_profile(E) crypto_simd(E) ucsi_acpi(E) realtek(E) typec_ucsi(E) cryptd(E) mdio_devres(E) pcspkr(E) joydev(E) efi_pstore(E) ipmi_devintf(E) wmi_bmof(E) sp5100_tco(E) k10temp(E) typec(E) snd(E) i2c_piix4(E) rfkill(E) ipmi_msghandler(E) libphy(E) roles(E) soundcore(E) ac(E) i2c_scmi(E) acpi_cpufreq(E) button(E) fuse(E) configfs(E) hid_generic(E) btrfs(E) blake2b_generic(E) libcrc32c(E) xor(E) usbhid(E) amdgpu(E) raid6_pq(E) drm_ttm_helper(E) ttm(E)
[ 1321.322011] iommu_v2(E) gpu_sched(E) i2c_algo_bit(E) drm_buddy(E) drm_display_helper(E) rtsx_pci_sdmmc(E) mmc_core(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) crc32c_intel(E) nvme(E) fb_sys_fops(E) nvme_core(E) t10_pi(E) xhci_pci(E) drm(E) serio_raw(E) ehci_pci(E) xhci_hcd(E) cec(E) rtsx_pci(E) ehci_hcd(E) crc64_rocksoft(E) rc_core(E) mfd_core(E) usbcore(E) crc64(E) battery(E) video(E) wmi(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) scsi_common(E) msr(E) efivarfs(E)
[ 1321.322050] CPU: 7 PID: 3102 Comm: kworker/u32:3 Tainted: G E 6.0.0-59.40-default+ #302
[ 1321.322053] Hardware name: LENOVO 20NJS0KQ07/20NJS0KQ07, BIOS R12ET55W(1.25 ) 07/06/2020
[ 1321.322056] Workqueue: phy0 ieee80211_iface_work [mac80211]
[ 1321.322095] RIP: 0010:wireless_send_event+0x41c/0x480
[ 1321.322100] Code: a5 fd ff ff b9 04 00 00 00 48 c7 c2 98 4c 5e af 48 89 ee 48 c7 c7 98 d0 4f af 48 89 04 24 c6 05 0b d7 e4 00 01 e8 f4 97 66 ff <0f> 0b 48 8b 04 24 e9 59 fe ff ff 48 8b 7c 24 10 89 ea 48 c7 c6 c0
[ 1321.322102] RSP: 0018:ffffb01fc2c77830 EFLAGS: 00010282
[ 1321.322105] RAX: 0000000000000000 RBX: ffff956257857200 RCX: 0000000000000001
[ 1321.322107] RDX: 0000000080000001 RSI: ffffffffaf56d55d RDI: 00000000ffffffff
[ 1321.322109] RBP: 0000000000000010 R08: 0000000000000000 R09: c0000000ffffdfff
[ 1321.322111] R10: 0000000000000000 R11: ffffb01fc2c776c8 R12: ffffffffaf35681c
[ 1321.322112] R13: 0000000000000014 R14: ffff9561a94f6000 R15: ffff956257856100
[ 1321.322114] FS: 0000000000000000(0000) GS:ffff9563b0bc0000(0000) knlGS:0000000000000000
[ 1321.322116] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1321.322118] CR2: 00007ed4e011400a CR3: 0000000104f8e000 CR4: 00000000003506e0
[ 1321.322121] Call Trace:
[ 1321.322124] <TASK>
[ 1321.322130] __cfg80211_connect_result+0x357/0x600 [cfg80211]
[ 1321.322186] ? cfg80211_rx_assoc_resp+0x1a2/0x230 [cfg80211]
[ 1321.322221] cfg80211_rx_assoc_resp+0x1a2/0x230 [cfg80211]
[ 1321.322257] ieee80211_rx_mgmt_assoc_resp+0xe01/0xff0 [mac80211]
[ 1321.322304] ieee80211_sta_rx_queued_mgmt+0x359/0xb70 [mac80211]
[ 1321.322342] ? newidle_balance+0x250/0x400
[ 1321.322345] ? dequeue_entity+0x115/0x3d0
[ 1321.322347] ? preempt_count_add+0x70/0xa0
[ 1321.322351] ieee80211_iface_work+0x304/0x420 [mac80211]
[ 1321.322382] process_one_work+0x226/0x440
[ 1321.322386] ? process_one_work+0x440/0x440
[ 1321.322388] worker_thread+0x2a/0x3b0
[ 1321.322391] ? process_one_work+0x440/0x440
[ 1321.322394] kthread+0xe8/0x110
[ 1321.322397] ? kthread_complete_and_exit+0x20/0x20
[ 1321.322400] ret_from_fork+0x22/0x30
[ 1321.322405] </TASK>
[ 1321.322406] ---[ end trace 0000000000000000 ]---
[ 1321.358996] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by cc:ce:1e:f4:37:95
[ 1321.463963] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
on this hardware:
1:00.0 0280: 8086:2526 (rev 29)
Subsystem: 8086:0014
Physical Slot: 0
Flags: bus master, fast devsel, latency 0, IRQ 80
Memory at d0a00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [14c] Latency Tolerance Reporting
Capabilities: [154] L1 PM Substates
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
Head commit is:
commit f141df371335645ce29a87d9683a3f79fba7fd67 (origin/master, origin/HEAD)
Merge: f49b2d89fb10 986d93f55bde
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue Nov 8 12:30:29 2022 -0800
Merge tag 'audit-pr-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Regards
Oliver
next reply other threads:[~2022-11-09 15:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-09 15:26 Oliver Neukum [this message]
2022-11-22 4:31 ` warning upon association with latest kernel Kees Cook
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f6cb6803-602f-91e3-8bd3-3bbbd924731d@suse.com \
--to=oneukum@suse.com \
--cc=gregory.greenman@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.