Re: [PATCH v3 1/2] dt-bindings: pinctrl: mediatek: add support for mt8196

["Cathy Xu (许华婷)" <ot_cathy.xu@mediatek.com>]

On Wed, 2025-01-15 at 10:50 +0100, Krzysztof Kozlowski wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> On Wed, Jan 15, 2025 at 02:35:38PM +0800, Cathy Xu wrote:
> > +
> > +        properties:
> > +          pinmux:
> > +            description:
> > +              Integer array, represents gpio pin number and mux
> > setting.
> > +              Supported pin number and mux varies for different
> > SoCs, and are
> > +              defined as macros in dt-bindings/pinctrl/mt8196-
> > pinfunc.h
> > +              directly, for this SoC.
> > +
> > +          drive-strength:
> > +            enum: [2, 4, 6, 8, 10, 12, 14, 16]
> > +
> > +          bias-pull-down:
> > +            oneOf:
> > +              - type: boolean
> > +              - enum: [100, 101, 102, 103]
> > +                description: mt8196 pull down PUPD/R0/R1 type
> > define value.
> > +              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> > +                description: mt8196 pull down RSEL type define
> > value.
> 
> Not much improved.
  I have removed the content related to 'resistance value', we use
'RSEL' instead of 'resistance value'.

> 
> 
> > +            description: |
> > +              For pull down type is normal, it doesn't need add
> > RSEL & R1R0.
> > +              For pull down type is PUPD/R0/R1 type, it can add
> > R1R0 define to
> > +              set different resistance. It can support
> > "MTK_PUPD_SET_R1R0_00" &
> > +              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> > +              "MTK_PUPD_SET_R1R0_11" define in mt8196.
> > +              For pull down type is PD/RSEL, it can add RSEL
> > define to set
> > +              different resistance. It can support
> > +              "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
> > +              "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> > +              "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
> > +              "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> > define in
> > +              mt8196.
> > diff --git a/include/dt-bindings/pinctrl/mt8196-pinfunc.h
> > b/include/dt-bindings/pinctrl/mt8196-pinfunc.h
> > new file mode 100644
> > index 000000000000..bf0c8374407c
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/mt8196-pinfunc.h
> > @@ -0,0 +1,1572 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2025 Mediatek Inc.
> > + * Author: Guodong Liu <Guodong.Liu@mediatek.com>
> > + */
> > +
> > +#ifndef __MT8196_PINFUNC_H
> > +#define __MT8196_PINFUNC_H
> > +
> > +#include <dt-bindings/pinctrl/mt65xx.h>
> > +
> > +#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
> > +#define PINMUX_GPIO0__FUNC_DMIC1_CLK (MTK_PIN_NO(0) | 1)
> > +#define PINMUX_GPIO0__FUNC_SPI3_A_MO (MTK_PIN_NO(0) | 3)
> > +#define PINMUX_GPIO0__FUNC_FMI2S_B_LRCK (MTK_PIN_NO(0) | 4)
> > +#define PINMUX_GPIO0__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(0) | 5)
> > +#define PINMUX_GPIO0__FUNC_TP_GPIO14_AO (MTK_PIN_NO(0) | 6)
> 
> I do not see how you resolved my comment from v1. In v2 I reminded
> about
> it, so you responded that yopu will change something, but I do not
> see
> any changes.
> 
> So explain: how did you resolve my comment?
> 
> These two examples where you claim you will change something, but
> send
> the same. I skipped the rest of the patch.

  Thank you for your patient response, here is my explanation for you
question:

  In v1, I undertand that you meant I didn't sent a real binding, and
the bindings should be separated from driver. In addition, I should
run scripts/checkpatch.pl and scripts/get_maintainers.pl. So in v2, I
sent a real binding(mediatek,mt8196-pinctrl.yaml), and sent two
separate patches, one for driver and one for bindings, also ran
scripts/get_maintainers.pl get necessary people and sent to them.

  In v2, I understand that I need refer to git history to modify the
commit msgs, so I made the changes in v3. Then you asked me about the
difference between 'RSEL' and 'resistance value'. I replied that the
'resistance value' method is no longer use, so in v3, I removed all
content about it(include entire 'rsel-resistance-in-si-unit' property
and the parts mentioned in bias-pull-up/down).

  I may not have correctly undertand your meaning, so I didn't make the
changes you wanted. If that is the case, please point it out. Thank
you.

> 
> Best regards,
> Krzysztof
>