From: K Prateek Nayak <kprateek.nayak@amd.com>
To: David Vernet <void@manifault.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>,
linux-kernel@vger.kernel.org, mingo@redhat.com,
peterz@infradead.org, juri.lelli@redhat.com,
vincent.guittot@linaro.org, dietmar.eggemann@arm.com,
rostedt@goodmis.org, bsegall@google.com, mgorman@suse.de,
bristot@redhat.com, vschneid@redhat.com, gautham.shenoy@amd.com
Subject: Re: [PATCH] sched/fair: Skip newidle_balance() when an idle CPU is woken up to process an IPI
Date: Wed, 24 Jan 2024 14:05:23 +0530 [thread overview]
Message-ID: <f7db8b6f-d97d-630d-28b3-97062fa2c7cc@amd.com> (raw)
In-Reply-To: <20240123211756.GA221793@maniforge>
Hello David,
Thank you for taking a look at the patch.
On 1/24/2024 2:47 AM, David Vernet wrote:
> On Tue, Jan 23, 2024 at 10:28:31AM +0530, K Prateek Nayak wrote:
>> Hello Tim,
>>
>> On 1/23/2024 3:29 AM, Tim Chen wrote:
>>> On Fri, 2024-01-19 at 14:15 +0530, K Prateek Nayak wrote:
>>>>
>>>> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
>>>> index b803030c3a03..1fedc7e29c98 100644
>>>> --- a/kernel/sched/fair.c
>>>> +++ b/kernel/sched/fair.c
>>>> @@ -8499,6 +8499,16 @@ done: __maybe_unused;
>>>> if (!rf)
>>>> return NULL;
>>>>
>>>> + /*
>>>> + * An idle CPU in TIF_POLLING mode might end up here after processing
>>>> + * an IPI when the sender sets the TIF_NEED_RESCHED bit and avoids
>>>> + * sending an actual IPI. In such cases, where an idle CPU was woken
>>>> + * up only to process an interrupt, without necessarily queuing a task
>>>> + * on it, skip newidle_balance() to facilitate faster idle re-entry.
>>>> + */
>>>> + if (prev == rq->idle)
>>>> + return NULL;
>>>> +
>>>
>>> Should we check the call function queue directly to detect that there is
>>> an IPI waiting to be processed? something like
>>>
>>> if (!llist_empty(&per_cpu(call_single_queue, rq->cpu)))
>>> return NULL;
>>
>> That could be a valid check too. However, if an IPI is queued right
>> after this check, the processing is still delayed since
>> newidle_balance() only bails out for scenarios when a wakeup is trying
>> to queue a new task on the CPU running the newidle_balance().
>>
>>>
>>> Could there be cases where we want to do idle balance in this code path?
>>> Say a cpu is idle and a scheduling tick came in, we may try
>>> to look for something to run on the idle cpu. Seems like after
>>> your change above, that would be skipped.
>>
>> Wouldn't scheduler_tick() do load balancing when the time comes? In my
>> testing, I did not see a case where the workloads I tested were
>> sensitive to the aspect of newidle_balance() being invoked at scheduler
>> tick. Have you come across a workload which might be sensitive to this
>> aspect that I can quickly test and verify? Meanwhile, I'll run the
>> workloads mentioned in the commit log on an Intel system to see if I
>> can spot any sensitivity to this change.
>>
>> Adding David to the thread too since HHVM seems to be one of those
>> workloads that is very sensitive to a successful newidle_balance().
>
> Thanks for the cc. FWIW, I think a lot of things are very sensitive to
> timing in newidle_balance(), but it goes both ways. For example, we had
> to revert commit e60b56e46b38 ("sched/fair: Wait before decaying
> max_newidle_lb_cost") [0] on our internal kernel because it regressed
> some workloads by causing us to load_balance() too frequently. I think
> the fix is correct in that there's no reason we shouldn't apply the ~1%
> decay / second to newidle lb cost in newidle_balance(), but by causing
> us to (correctly) decay newidle lb cost in newidle_balance(), it also
> increased CPU util rather significantly and had us spending too much
> time in load_balance().
>
> [0]: https://lore.kernel.org/all/20211019123537.17146-4-vincent.guittot@linaro.org/
>
> On the other hand, on other hosts, we use SHARED_RUNQ to load balance as
> aggressively as possible, and those hosts would have benefited from that
> change if SHARED_RUNQ wasn't an option.
>
> My 2 cents is that I think it's impossible to make everyone happy, and I
> think the change here makes sense. If there's imbalance, it's something
> we would uncover when load_balance() is kicked off on the tick path
> anyways. I also agree with Vincent [1] that your idea / prototype of
> adding a TIF_NEED_IPI flag is an overall better solution, but this does
> seem fine to me as well in the interim.
Thank you for the detailing your explorations and giving more insights
around newidle_balance(). I'll clean up and test the TIF_NEED_IPI
prototype some more before sending out an RFC.
>
> [1]: https://lore.kernel.org/all/CAKfTPtC446Lo9CATPp7PExdkLhHQFoBuY-JMGC7agOHY4hs-Pw@mail.gmail.com/
>
> Thanks,
> David
--
Thanks and Regards,
Prateek
prev parent reply other threads:[~2024-01-24 8:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-19 8:45 [PATCH] sched/fair: Skip newidle_balance() when an idle CPU is woken up to process an IPI K Prateek Nayak
2024-01-22 21:59 ` Tim Chen
2024-01-23 4:58 ` K Prateek Nayak
2024-01-23 8:06 ` Vincent Guittot
2024-01-23 10:00 ` K Prateek Nayak
2024-01-23 13:39 ` Vincent Guittot
2024-01-24 8:26 ` K Prateek Nayak
2024-01-23 21:17 ` David Vernet
2024-01-24 8:35 ` K Prateek Nayak [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f7db8b6f-d97d-630d-28b3-97062fa2c7cc@amd.com \
--to=kprateek.nayak@amd.com \
--cc=bristot@redhat.com \
--cc=bsegall@google.com \
--cc=dietmar.eggemann@arm.com \
--cc=gautham.shenoy@amd.com \
--cc=juri.lelli@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgorman@suse.de \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=tim.c.chen@linux.intel.com \
--cc=vincent.guittot@linaro.org \
--cc=void@manifault.com \
--cc=vschneid@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.