From: John Donnelly <John.P.Donnelly@Oracle.com>
To: linux-kernel@vger.kernel.org
Cc: Lu Baolu <baolu.lu@linux.intel.com>,
joro@8bytes.org, John Donnelly <john.p.donnelly@Oracle.com>
Subject: [PATCH v3 ] iommu/vt-d: Fix panic after kexec -p for kdump
Date: Mon, 21 Oct 2019 21:48:10 -0500 [thread overview]
Message-ID: <f856dfd6-0483-fb97-033c-1cda83ead79f@Oracle.com> (raw)
This cures a panic on restart after a kexec operation on 5.3 and 5.4
kernels.
The underlying state of the iommu registers (iommu->flags &
VTD_FLAG_TRANS_PRE_ENABLED) on a restart results in a domain being marked as
"DEFER_DEVICE_DOMAIN_INFO" that produces an Oops in identity_mapping().
[ 43.654737] BUG: kernel NULL pointer dereference, address:
0000000000000056
[ 43.655720] #PF: supervisor read access in kernel mode
[ 43.655720] #PF: error_code(0x0000) - not-present page
[ 43.655720] PGD 0 P4D 0
[ 43.655720] Oops: 0000 [#1] SMP PTI
[ 43.655720] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.3.2-1940.el8uek.x86_64 #1
[ 43.655720] Hardware name: Oracle Corporation ORACLE SERVER
X5-2/ASM,MOTHERBOARD,1U, BIOS 30140300 09/20/2018
[ 43.655720] RIP: 0010:iommu_need_mapping+0x29/0xd0
[ 43.655720] Code: 00 0f 1f 44 00 00 48 8b 97 70 02 00 00 48 83 fa ff
74 53 48 8d 4a ff b8 01 00 00 00 48 83 f9 fd 76 01 c3 48 8b 35 7f 58 e0
01 <48> 39 72 58 75 f2 55 48 89 e5 41 54 53 48 8b 87 28 02 00 00 4c 8b
[ 43.655720] RSP: 0018:ffffc9000001b9b0 EFLAGS: 00010246
[ 43.655720] RAX: 0000000000000001 RBX: 0000000000001000 RCX:
fffffffffffffffd
[ 43.655720] RDX: fffffffffffffffe RSI: ffff8880719b8000 RDI:
ffff8880477460b0
[ 43.655720] RBP: ffffc9000001b9e8 R08: 0000000000000000 R09:
ffff888047c01700
[ 43.655720] R10: 00002194036fc692 R11: 0000000000000000 R12:
0000000000000000
[ 43.655720] R13: ffff8880477460b0 R14: 0000000000000cc0 R15:
ffff888072d2b558
[ 43.655720] FS: 0000000000000000(0000) GS:ffff888071c00000(0000)
knlGS:0000000000000000
[ 43.655720] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 43.655720] CR2: 0000000000000056 CR3: 000000007440a002 CR4:
00000000001606b0
[ 43.655720] Call Trace:
[ 43.655720] ? intel_alloc_coherent+0x2a/0x180
[ 43.655720] ? __schedule+0x2c2/0x650
[ 43.655720] dma_alloc_attrs+0x8c/0xd0
[ 43.655720] dma_pool_alloc+0xdf/0x200
[ 43.655720] ehci_qh_alloc+0x58/0x130
[ 43.655720] ehci_setup+0x287/0x7ba
[ 43.655720] ? _dev_info+0x6c/0x83
[ 43.655720] ehci_pci_setup+0x91/0x436
[ 43.655720] usb_add_hcd.cold.48+0x1d4/0x754
[ 43.655720] usb_hcd_pci_probe+0x2bc/0x3f0
[ 43.655720] ehci_pci_probe+0x39/0x40
[ 43.655720] local_pci_probe+0x47/0x80
[ 43.655720] pci_device_probe+0xff/0x1b0
[ 43.655720] really_probe+0xf5/0x3a0
[ 43.655720] driver_probe_device+0xbb/0x100
[ 43.655720] device_driver_attach+0x58/0x60
[ 43.655720] __driver_attach+0x8f/0x150
[ 43.655720] ? device_driver_attach+0x60/0x60
[ 43.655720] bus_for_each_dev+0x74/0xb0
[ 43.655720] driver_attach+0x1e/0x20
[ 43.655720] bus_add_driver+0x151/0x1f0
[ 43.655720] ? ehci_hcd_init+0xb2/0xb2
[ 43.655720] ? do_early_param+0x95/0x95
[ 43.655720] driver_register+0x70/0xc0
[ 43.655720] ? ehci_hcd_init+0xb2/0xb2
[ 43.655720] __pci_register_driver+0x57/0x60
[ 43.655720] ehci_pci_init+0x6a/0x6c
[ 43.655720] do_one_initcall+0x4a/0x1fa
[ 43.655720] ? do_early_param+0x95/0x95
[ 43.655720] kernel_init_freeable+0x1bd/0x262
[ 43.655720] ? rest_init+0xb0/0xb0
[ 43.655720] kernel_init+0xe/0x110
[ 43.655720] ret_from_fork+0x24/0x50
Fixes: 8af46c784ecfe ("iommu/vt-d: Implement is_attach_deferred iommu
ops entry")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
---
drivers/iommu/intel-iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index c4e0e4a9ee9e..f83a9a302f8e 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -2783,7 +2783,7 @@ static int identity_mapping(struct device *dev)
struct device_domain_info *info;
info = dev->archdata.iommu;
- if (info && info != DUMMY_DEVICE_DOMAIN_INFO)
+ if (info && info != DUMMY_DEVICE_DOMAIN_INFO && info !=
DEFER_DEVICE_DOMAIN_INFO)
return (info->domain == si_domain);
return 0;
--
2.20.1
--
Thank You,
John
next reply other threads:[~2019-10-22 2:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-22 2:48 John Donnelly [this message]
2019-10-30 9:33 ` [PATCH v3 ] iommu/vt-d: Fix panic after kexec -p for kdump Joerg Roedel
2019-10-30 13:01 ` John Donnelly
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f856dfd6-0483-fb97-033c-1cda83ead79f@Oracle.com \
--to=john.p.donnelly@oracle.com \
--cc=baolu.lu@linux.intel.com \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.