From: "Rafał Miłecki" <zajec5@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: "Richard Weinberger" <richard@nod.at>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
linux-mtd@lists.infradead.org,
"Srinivas Kandagatla" <srinivas.kandagatla@linaro.org>,
"Daniel Golle" <daniel@makrotopia.org>,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: Re: [PATCH V2] mtd: call of_platform_populate() for MTD partitions
Date: Tue, 10 May 2022 07:56:02 +0200 [thread overview]
Message-ID: <fad59ae2-bf45-9744-08e3-946b943a410b@gmail.com> (raw)
In-Reply-To: <20220509161708.5817de9b@xps13>
On 9.05.2022 16:17, Miquel Raynal wrote:
> zajec5@gmail.com wrote on Wed, 4 May 2022 21:44:48 +0200:
>
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> Until this change MTD subsystem supported handling partitions only with
>> MTD partitions parsers. That's a specific / limited API designed around
>> partitions.
>>
>> Some MTD partitions may however require different handling. They may
>> contain specific data that needs to be parsed and somehow extracted. For
>> that purpose MTD subsystem should allow binding of standard platform
>> drivers.
>>
>> An example can be U-Boot (sub)partition with environment variables.
>> There exist a "u-boot,env" DT binding for MTD (sub)partition that
>> requires an NVMEM driver.
>>
>> Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>> V2: Fix case for # CONFIG_MTD_PARTITIONED_MASTER is not set
>> master->dev can't be used blindly as it may point to unregistered
>> device and cause WARNINGs
>> ---
>> drivers/mtd/mtdpart.c | 9 +++++++++
>> 1 file changed, 9 insertions(+)
>>
>> diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
>> index 357661b62c94..4971fa69d076 100644
>> --- a/drivers/mtd/mtdpart.c
>> +++ b/drivers/mtd/mtdpart.c
>> @@ -17,6 +17,7 @@
>> #include <linux/mtd/partitions.h>
>> #include <linux/err.h>
>> #include <linux/of.h>
>> +#include <linux/of_platform.h>
>>
>> #include "mtdcore.h"
>>
>> @@ -577,10 +578,16 @@ static int mtd_part_of_parse(struct mtd_info *master,
>> struct mtd_part_parser *parser;
>> struct device_node *np;
>> struct property *prop;
>> + struct device *dev;
>> const char *compat;
>> const char *fixed = "fixed-partitions";
>> int ret, err = 0;
>>
>> + if (mtd_is_partition(master) || IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER))
>
> Are you sure about this condition? Isn't accessing master->dev.parent
> going to fail if !IS_ENABLED(PARTITIONED_MASTER) ?
>
> I'm not 100% sure my remark is correct but I fail to get the logic
> here.
It seems to work as expected, I tested it using device with following
layout:
2 fixed-partitions partitions found on MTD device brcmnand.0
Creating 2 MTD partitions on "brcmnand.0":
0x000000000000-0x000000100000 : "loader"
1 fixed-partitions partitions found on MTD device loader
Creating 1 MTD partitions on "loader":
0x000000040000-0x000000044008 : "u-boot-env"
0x000000100000-0x00001ff00000 : "image"
brcmnand.0
├── loader
│ └── u-boot-env
└── image
# CONFIG_MTD_PARTITIONED_MASTER is not set
┌────────┬────────────┬────────────────────────────────────────┐
│ Device │ Name │ struct device *dev │
├────────┼────────────┼────────────────────────────────────────┤
│ - │ brcmnand.0 │ bcm63138_nand ff801800.nand-controller │
│ mtd0 │ loader │ mtd mtd0 │
│ mtd1 │ u-boot-env │ mtd mtd1 │
│ mtd2 │ image │ mtd mtd2 │
└────────┴────────────┴────────────────────────────────────────┘
CONFIG_MTD_PARTITIONED_MASTER=y
┌────────┬────────────┬────────────────────┐
│ Device │ Name │ struct device *dev │
├────────┼────────────┼────────────────────┤
│ mtd0 │ brcmnand.0 │ mtd0 │
│ mtd1 │ loader │ mtd mtd1 │
│ mtd2 │ u-boot-env │ mtd mtd2 │
│ mtd3 │ image │ mtd mtd3 │
└────────┴────────────┴────────────────────┘
As you can see the only tricky case is *master* mtd *without*
CONFIG_MTD_PARTITIONED_MASTER. In that case we don't register its device
and so a parent (NAND controller) has to be used instead. My condition
seems to handle that correctly.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2022-05-10 5:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-04 19:44 [PATCH V2] mtd: call of_platform_populate() for MTD partitions Rafał Miłecki
2022-05-09 14:17 ` Miquel Raynal
2022-05-10 5:56 ` Rafał Miłecki [this message]
2022-05-10 8:12 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fad59ae2-bf45-9744-08e3-946b943a410b@gmail.com \
--to=zajec5@gmail.com \
--cc=daniel@makrotopia.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=rafal@milecki.pl \
--cc=richard@nod.at \
--cc=srinivas.kandagatla@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.