Re: [PATCH v4 13/16] ASoC: amd: acp: add ACPI machine tables for ACP7.F SoundWire

[Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>]

On 10/30/26 10:45, Vijendar Mukunda wrote:
> Add amd-acp7x-acpi-match.c with four snd_soc_acpi_mach entries for
> ACP7.F SoundWire configurations:
> - RT721 + RT1320 on SoundWire links L0+L3
>   (jack+dmic on RT721, spk on RT1320)
> - RT721 + RT1320 on SoundWire links L0+L1
>   (jack+dmic on RT721, spk on RT1320)
> - Standalone RT721 on L0 (jack, amp and dmic endpoints)
> - Standalone RT722 on L0 (jack, amp and dmic endpoints)
> 
> RT721+RT1320 combo configurations use jack_dmic_endpoints for RT721,
> skipping the internal amp since RT1320 provides amplification on a
> dedicated SoundWire link.

[...]

> +static const struct snd_soc_acpi_adr_device rt721_l0_single_adr[] = {
> +	{
> +		.adr = 0x000030025d072101ull,
> +		.num_endpoints = ARRAY_SIZE(jack_dmic_endpoints),
> +		.endpoints = jack_dmic_endpoints,
> +		.name_prefix = "rt721"
> +	}
> +};
> +
> +static const struct snd_soc_acpi_adr_device rt721_l0_only[] = {
> +	{
> +		.adr = 0x000030025d072101ull,
> +		.num_endpoints = ARRAY_SIZE(jack_amp_dmic_endpoints),
> +		.endpoints = jack_amp_dmic_endpoints,
> +		.name_prefix = "rt721"
> +	}
> +};

nit-pick: The naming conventions aren't self-explanatory and don't match
the explanations above. The difference between l0_single_adr and l0_only
are related to the endpoints used, and they don't match what's used for
rt722 below.

[...]> +static const struct snd_soc_acpi_adr_device
rt722_l0_single_adr[] = {
> +	{
> +		.adr = 0x000030025d072201ull,
> +		.num_endpoints = ARRAY_SIZE(jack_amp_dmic_endpoints),
> +		.endpoints = jack_amp_dmic_endpoints,
> +		.name_prefix = "rt722"
> +	}
> +};