From: Marcus Better <marcus@better.se>
To: linux-wireless@vger.kernel.org
Subject: Re: rt2500pci 2.0.9 not working
Date: Wed, 10 Oct 2007 11:06:11 +0200 [thread overview]
Message-ID: <fei4sd$mm0$1@sea.gmane.org> (raw)
In-Reply-To: fdqhn4$qab$1@sea.gmane.org
Marcus Better wrote:
> I just tried the rt2500pci driver version 2.0.9 from the wireless-2.6
> tree. It does not work.
Neither does 2.0.10 from the current wireless-2.6 "everything" branch. I see scan results now but cannot associate with the access point using WEP.
Here are some logs:
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - Start initialization from EEPROM...
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x0f, value: 0x30.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x11, value: 0x26.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x15, value: 0x18.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x16, value: 0x18.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x35, value: 0x10.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x36, value: 0x10.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x3d, value: 0x6a.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x3e, value: 0x10.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x23, value: 0x50.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x29, value: 0x60.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x36, value: 0x18.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - BBP: 0x3e, value: 0x00.
Oct 10 10:26:27 better kernel: phy0 -> rt2500pci_init_bbp: Debug - ...End initialization from EEPROM.
Oct 10 10:26:27 better kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 5, CWmax: 10, Aifs: 2.
Oct 10 10:26:27 better kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 5, CWmax: 10, Aifs: 2.
Oct 10 10:26:27 better kernel: phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 7 - CWmin: 6, CWmax: 10, Aifs: 2.
Oct 10 10:26:27 better kernel: wlan0: Initial auth_alg=0
Oct 10 10:26:27 better kernel: wlan0: authenticate with AP 00:14:6c:a7:60:10
Oct 10 10:26:27 better kernel: wlan0: RX authentication from 00:14:6c:a7:60:10 (alg=0 transaction=2 status=0)
Oct 10 10:26:27 better kernel: wlan0: authenticated
Oct 10 10:26:27 better kernel: wlan0: associate with AP 00:14:6c:a7:60:10
Oct 10 10:26:27 better kernel: wlan0: invalid aid value 0; bits 15:14 not set
Oct 10 10:26:27 better kernel: wlan0: RX AssocResp from 00:14:6c:a7:60:10 (capab=0x431 status=19 aid=0)
Oct 10 10:26:27 better kernel: wlan0: AP denied association (code=19)
Oct 10 10:26:27 better kernel: wlan0: associate with AP 00:14:6c:a7:60:10
Oct 10 10:26:27 better kernel: wlan0: invalid aid value 0; bits 15:14 not set
Oct 10 10:26:27 better kernel: wlan0: RX AssocResp from 00:14:6c:a7:60:10 (capab=0x431 status=19 aid=0)
Oct 10 10:26:27 better kernel: wlan0: AP denied association (code=19)
Oct 10 10:26:27 better kernel: wlan0: associate with AP 00:14:6c:a7:60:10
Oct 10 10:26:27 better kernel: wlan0: invalid aid value 0; bits 15:14 not set
Oct 10 10:26:27 better kernel: wlan0: RX AssocResp from 00:14:6c:a7:60:10 (capab=0x431 status=19 aid=0)
Oct 10 10:26:27 better kernel: wlan0: AP denied association (code=19)
Oct 10 10:26:27 better kernel: wlan0: association with AP 00:14:6c:a7:60:10 timed out
Thanks,
Marcus
next prev parent reply other threads:[~2007-10-10 9:09 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-01 10:18 rt2500pci 2.0.9 not working Marcus Better
2007-10-10 9:06 ` Marcus Better [this message]
2007-10-10 9:26 ` Johannes Berg
2007-10-10 9:43 ` Marcus Better
2007-10-10 9:51 ` Johannes Berg
2007-10-10 10:56 ` Marcus Better
2007-10-10 11:30 ` Johannes Berg
2007-10-10 12:17 ` Marcus Better
2007-10-10 17:43 ` Johannes Berg
2007-10-11 9:05 ` Marcus Better
2007-10-11 9:15 ` Johannes Berg
2007-10-11 18:05 ` Ivo van Doorn
2007-10-12 9:04 ` Marcus Better
2007-10-12 13:32 ` Marcus Better
2007-10-12 14:50 ` Larry Finger
2007-10-15 9:57 ` Marcus Better
2007-10-15 21:49 ` Adam Baker
2007-10-12 19:18 ` Johannes Berg
2007-10-12 19:24 ` [PATCH v2] mac80211: fix set_channel regression Johannes Berg
2007-10-12 20:41 ` Michael Wu
2007-10-15 7:04 ` Marcus Better
2007-10-15 8:32 ` Johannes Berg
2007-10-15 11:37 ` Marcus Better
2007-10-15 11:45 ` Johannes Berg
2007-10-15 18:13 ` Ivo van Doorn
2007-10-18 9:37 ` Marcus Better
2007-10-19 7:49 ` Marcus Better
2007-10-19 19:10 ` Ivo van Doorn
2007-10-24 7:36 ` Marcus Better
2007-10-10 10:03 ` [PATCH] mac80211: reorder association debug output Johannes Berg
2007-10-10 20:52 ` Michael Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='fei4sd$mm0$1@sea.gmane.org' \
--to=marcus@better.se \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.