Re: [PATCH] sensors-detect: Move Winbond WPCD377I to the non-hwmon table

["Ondřej Lysoněk" <olysonek@redhat.com>]

Jean Delvare <jdelvare@suse.de> writes:

> Move the detection entry for the Winbond WPCD377I to the
> @non_hwmon_chip_ids table, where it belongs. This saves one line, and
> more importantly prevents "not-a-sensor" from being accidentally
> added to the list of kernel drivers.
>
> Signed-off-by: Jean Delvare <jdelvare@suse.de>
> ---
>  prog/detect/sensors-detect |    9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
>
> --- lm-sensors.orig/prog/detect/sensors-detect	2020-05-12 11:08:57.101496194 +0200
> +++ lm-sensors/prog/detect/sensors-detect	2020-05-12 16:18:49.375617471 +0200
> @@ -719,11 +719,6 @@
>  		i2c_addrs => [0x2c..0x2e],
>  		i2c_detect => sub { emc6w201_detect(@_); },
>  	}, {
> -		name => "Winbond WPCD377I",
> -		driver => "not-a-sensor",
> -		i2c_addrs => [0x2c..0x2e],
> -		i2c_detect => sub { lm85_detect(@_, 7); },
> -	}, {
>  		name => "Analog Devices ADT7462",
>  		driver => "adt7462",
>  		i2c_addrs => [0x5c, 0x58],
> @@ -1684,6 +1679,10 @@
>  		i2c_addrs => [0x2c..0x2f],
>  		i2c_detect => sub { w83791sd_detect(@_); },
>  	}, {
> +		name => "Winbond WPCD377I",
> +		i2c_addrs => [0x2c..0x2e],
> +		i2c_detect => sub { lm85_detect(@_, 7); },
> +	}, {
>  		name => "Fintek F75111R/RG/N (GPIO)",
>  		i2c_addrs => [0x37, 0x4e],
>  		i2c_detect => sub { fintek_detect(@_, 1); },
>
>
> -- 
> Jean Delvare
> SUSE L3 Support

Applied. Thanks!

Ondřej Lysoněk