All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frederic MASSOT <frederic@juliana-multimedia.com>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] No TV after an dist-upgrade
Date: Fri, 11 Apr 2008 21:25:30 +0200	[thread overview]
Message-ID: <ftoe35$pdu$1@ger.gmane.org> (raw)

Hi,

There is still one week, I was watching TV (DVB-T) on my PC with
Kaffeine without problems. My PC uses a Debian Etch, last weekend I do
an update to Etch (final), then Lenny, since everything works except the
TV. Strange !?

I use a DVB-T card ASUSTeK P7131 Dual, and I use a custom Linux kernel
2.6.24 with DVB support. I kept the same kernel (2.6.24) before and
after the upgrade.

- The card is well recognized by the kernel, dmesg output:

saa7133[0]: found at 0000:05:03.0, rev: 209, irq: 16, latency: 64, mmio:
0xff7ff000
saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid
[card=112,autodetected]
saa7133[0]: board init: gpio is 0
input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input4
saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 1-004b: chip found @ 0x96 (saa7133[0])
tda8290 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
tda8290 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: found firmware revision 29 -- ok
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xff7ff000 irq 16 registered as card -1


- Devices :
$ ls -l /dev/dvb/adapter0/
crw-rw---- 1 root video 212, 4 avr 11 19:55 demux0
crw-rw---- 1 root video 212, 5 avr 11 19:55 dvr0
crw-rw---- 1 root video 212, 3 avr 11 19:55 frontend0
crw-rw---- 1 root video 212, 7 avr 11 19:55 net0


- I use the file fr-Vannes, when I scan, I have these messages :

$ sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Vannes
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Vannes
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 674167000 0 2 9 3 1 0 0
initial transponder 698167000 0 2 9 3 1 0 0
initial transponder 762167000 0 2 9 3 1 0 0
initial transponder 778167000 0 2 9 3 1 0 0
initial transponder 818167000 0 2 9 3 1 0 0
>>> tune to:
674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0502
WARNING: filter timeout pid 0x0504
WARNING: filter timeout pid 0x050a
WARNING: filter timeout pid 0x0500
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0503
WARNING: filter timeout pid 0x0506
WARNING: filter timeout pid 0x0505
WARNING: filter timeout pid 0x0010
>>> tune to:
698167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to:
762167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to:
778167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to:
818167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (7 services)
[0201]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:513
[0207]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:519
[02ff]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:767
[0206]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:518
[0205]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:517
[0204]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:516
[0203]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:515
Done.



I have no error messages in the log, it's one week that I seek, I do not
understand what is no longer working.


Regards.
-- 
==============================================
|              FRÉDÉRIC MASSOT               |
|     http://www.juliana-multimedia.com      |
|   mailto:frederic@juliana-multimedia.com   |
===========================Debian=GNU/Linux===


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2008-04-11 19:27 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-11 19:25 Frederic MASSOT [this message]
2008-04-13 21:06 ` [linux-dvb] No TV after an dist-upgrade Frederic MASSOT
2008-04-14 22:26   ` Frederic MASSOT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='ftoe35$pdu$1@ger.gmane.org' \
    --to=frederic@juliana-multimedia.com \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.