From: Jens Scharsig <esw@bus-elektronik.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] at91rm9200: fix broken boot from nor flash
Date: Tue, 18 Nov 2008 10:48:46 +0100 [thread overview]
Message-ID: <gfu31h$hf8$1@ger.gmane.org> (raw)
This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
CONFIG_AT91RM9200 is defined and nor preloader is used.
Please see <http://lists.denx.de/pipermail/u-boot/2008-November/043078.html>
<http://lists.denx.de/pipermail/u-boot/2008-November/043093.html>
for reason
Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
---
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 17977c2..52aff13 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -24,7 +24,6 @@
* MA 02111-1307 USA
*/
-
#include <config.h>
#include <version.h>
#include <status_led.h>
@@ -178,8 +177,6 @@ copyex:
bl cpu_init_crit
#endif
-#ifndef CONFIG_AT91RM9200
-
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
@@ -198,7 +195,7 @@ copy_loop:
cmp r0, r2 /* until source end addreee [r2] */
ble copy_loop
#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
-#endif
+
/* Set up the stack */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 633a053..5c239d7 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -72,6 +72,8 @@
#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/*
* Size of malloc() pool
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index 527921e..cdd308d 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -71,6 +71,8 @@
#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/*
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index 38fd25c..682db44 100644
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -72,6 +72,8 @@
#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/*
* Size of malloc() pool
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
index 55cda32..1ce8c69 100644
--- a/include/configs/kb9202.h
+++ b/include/configs/kb9202.h
@@ -51,6 +51,8 @@
#define CONFIG_INITRD_TAG 1
#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT /* undef this for direct boot from */
+ /* NOR flash without preloader */
#define CONFIG_SYS_LONGHELP
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 2ffeae6..cbbdb0c 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -76,6 +76,8 @@
#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/*
next reply other threads:[~2008-11-18 9:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-18 9:48 Jens Scharsig [this message]
2008-11-19 12:31 ` [U-Boot] [PATCH] at91rm9200: fix broken boot from nor flash Jean-Christophe PLAGNIOL-VILLARD
2008-11-24 0:28 ` Wolfgang Denk
2008-11-24 12:06 ` Jens Scharsig
2008-11-24 20:29 ` Wolfgang Denk
2008-11-24 23:35 ` Pink Boy
2008-11-24 21:12 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='gfu31h$hf8$1@ger.gmane.org' \
--to=esw@bus-elektronik.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.