From: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
To: linux-kernel@vger.kernel.org
Subject: [PATCH] Re: ALSA HDA Intel stoped to work in 2.6.16-*
Date: Sat, 07 Mar 2009 08:50:16 -0800 [thread overview]
Message-ID: <gou8k9$reh$1@ger.gmane.org> (raw)
In-Reply-To: s5hek1fmzf4.wl%tiwai@suse.de
At Mon, 6 Mar 2006 15:16:15 +0100,
Takashi Iwai wrote:
> At Sat, 4 Mar 2006 15:51:14 +0100,
> Adrian Bunk wrote:
>>
>> On Sat, Mar 04, 2006 at 02:29:02AM -0300, Otavio Salvador wrote:
>> > Takashi Iwai <tiwai@suse.de> writes:
>> >
>> > > Are you sure that your device has PCI SUB-system id 8086:2668 ?
>> >
>> > oh no! Sorry!
>> >
>> > 0000:00:1b.0 0403: 8086:2668 (rev 04)
>> > Subsystem: 152d:0729
>> > ^^^^^^^^^
>>
>> Can you make a patch with the correct id test whether it fixes your
>> problem (without model=basic)?
>
> This one should work for his device.
>
>
> Takashi
> ===
>
> [PATCH] Add default entry for CTL Travel Master U553W
>
> Added the default entry of ALC880 configuration table for
> CTL Travel Master U553W.
>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
>
> ---
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index b767552..d5cd3a1 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -2948,6 +2948,8 @@ static struct hda_board_config alc260_cf
> { .modelname = "basic", .config = ALC260_BASIC },
> { .pci_subvendor = 0x104d, .pci_subdevice = 0x81bb,
> .config = ALC260_BASIC }, /* Sony VAIO */
> + { .pci_subvendor = 0x152d, .pci_subdevice = 0x0729,
> + .config = ALC260_BASIC }, /* CTL Travel Master U553W */
> { .modelname = "hp", .config = ALC260_HP },
> { .pci_subvendor = 0x103c, .pci_subdevice = 0x3010, .config = ALC260_HP },
> { .pci_subvendor = 0x103c, .pci_subdevice = 0x3011, .config = ALC260_HP },
It has been three years since the above patch was posted with a request for
testing. No testing reply ever appeared, and the patch was committed as
submitted. On the relevant hardware, I determined the patch to be incorrect.
For the git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
head, the following patch appears to fix it correctly:
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 6c26afc..87ec806 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5692,7 +5692,7 @@ static struct snd_pci_quirk alc260_cfg_tbl[] = {
SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
- SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
+ SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_WILL),
SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V),
SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL),
{}
next prev parent reply other threads:[~2009-03-07 17:20 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-27 13:15 ALSA HDA Intel stoped to work in 2.6.16-* Otavio Salvador
2006-02-27 14:49 ` Diego Calleja
2006-02-28 8:34 ` Otavio Salvador
2006-02-27 15:02 ` Takashi Iwai
2006-02-28 8:51 ` Otavio Salvador
2006-02-28 10:54 ` Takashi Iwai
2006-02-28 20:28 ` Otavio Salvador
2006-03-01 10:29 ` Takashi Iwai
2006-03-02 2:24 ` Otavio Salvador
2006-03-03 18:11 ` Takashi Iwai
2006-03-04 5:29 ` Otavio Salvador
2006-03-04 14:51 ` Adrian Bunk
2006-03-06 14:16 ` Takashi Iwai
2009-03-07 16:50 ` Daniel Gimpelevich [this message]
2009-03-07 18:00 ` [PATCH] " Rafael J. Wysocki
2009-03-08 10:26 ` Takashi Iwai
2009-03-08 23:21 ` Daniel Gimpelevich
2009-03-11 8:33 ` Takashi Iwai
2009-03-11 13:07 ` Daniel Gimpelevich
2009-03-11 13:27 ` Takashi Iwai
2009-03-11 13:53 ` Daniel Gimpelevich
2006-03-04 15:00 ` [2.6 patch] ALSA-Configuration.txt: snd-hda-intel: document model=basic Adrian Bunk
2006-03-04 15:00 ` Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='gou8k9$reh$1@ger.gmane.org' \
--to=daniel@gimpelevich.san-francisco.ca.us \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.